15TS-86-R/Q

15TS MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

MODEL: 15TS 15TS SPECIFICATIONS ES-0612 Rev.8 Page 1/4 http://www.m-system.co.jp/ Dual Channel Input/Output Isolators 15-RACK THERMOCOUPLE CONVERTER Functions & Features

• Accepting direct input from a thermocouple and providing a standard process signal
• Linearization
• Burnout protection
• High-accuracy cold junction compensation
• 2 channels available; accomplishing economical and space-saving multi-input processing Typical Applications
• High-accuracy cold junction compensation benefits narrow span measurements
• 0.1 μA burnoutsensing enables long distance transmission with minimum offset drifts
• Electric furnace (isolation)
• No burnout type can connect to a single T/C in parallel with a recorder MODEL: 15TS–[1]6–R[2]

ORDERING INFORMATION

• Code number: 15TS-[1]6-R[2] Specify a code from below for each [1] and [2]. (e.g. 15TS-26-R/BL/Q)
• Temperature range (e.g. 0 – 800°C)
• Specify the specification for option code /Q (e.g. /C01) [1] INPUT THERMOCOUPLE 1: (PR) 2: K (CA) 3: E (CRC) 4: J (IC) 5: T (CC) 6: B (RH) Consult M-System for B thermocouple 7: R 8: S 0: Specify OUTPUT Voltage 6: 1 – 5 V DC (Load resistance 5000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [2] OPTIONS (multiple selections) Burnout blank: Upscale burnout /BL: Downscale burnout /BN: No burnout Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

• EXTENDER CARD (model:10EC) Necessary to adjust span. GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear; terminal cover provided Connection: Input: M3.5 screw terminals (torque 0.8 N·m) Output: Card-edge connector Power input: Suplied from card edge connector Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) Isolation: Input to output or power; ch.1 input to ch.2 input Overrange output: Approx. -10 to +120 % Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (top) At burnout: Downscale ≤ -10 %, Upscale ≥ 110 % Linearization: Standard Cold junction compensation: CJC sensor attached to the input terminals (B thermocouple is without CJC as standard)

MODEL: 15TS 15TS SPECIFICATIONS ES-0612 Rev.8 Page 2/4 http://www.m-system.co.jp/ INPUT SPECIFICATIONS Input: Thermocouples Input resistance: 10kΩ minimum Burnout sensing: 0.1 μA Temperature range T/C TEMPERATURE RANGE (°C) ACCURACY 0 – 700 (300 – 700) 0 – 800 (300 – 800) (PR) 0 – 1400 (600 – 1400) 0 – 1600 (600 – 1600) 400 – 1000 400 – 1400 500 – 1500 600 – 1600 ±0.5% 700 – 1400 800 – 1600 900 – 1400 T/C TEMPERATURE ACCU- T/C TEMPERATURE ACCU- RANGE (°C) RACY RANGE ( °C) RACY 0 – 100 0 – 100 0 – 150 0 – 150 0 – 200 0 – 200 0 – 300 0 – 250 0 – 400 0 – 300 0 – 500 0 – 350 0 – 600 0 – 400 0 – 800 0 – 500 0 – 1000 E 0 – 600 ±0.5% 0 – 1100 (CRC) 0 – 700 100 – 300 0 – 800 100 – 500 100 – 300 K 200 – 500 ±0.3% 200 – 1000 200 – 500 300 – 600 300 – 500 400 – 1000 500 – 800 0 – 100 500 – 1000 0 – 150 500 – 1200 0 – 200 600 – 1000 0 – 250 600 – 1200 0 – 300 700 – 1000 0 – 350 700 – 1200 0 – 400 J 0 – 500 ±0.2% 0 – 100 50 – 200 0 – 200 100 – 300 T 0 – 250 ±0.6% 100 – 500 (CC) 0 – 300 200 – 400 50 – 150 200 – 500 100 – 200 300 – 500 100 – 300 300 – 600 300 – 700 Note 1: For R & S thermocouple, the accuracy described in the table is assured only within the ranges in parenthe- ses. The accuracy is otherwise approx. 3%. Note 2: Contact factory or M-System representatives for other thermocouples and ranges including °F description. INSTALLATION Current consumption: Approx. 50 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 15BX Weight: 180 g (0.40 lb) PERFORMANCE in percentage of span Accuracy: Refer to "Temperature range" table Cold junction compensation error: (at 20°C ±10°C or 68°F ±18°F) K, E, J & T: ±0.5°C or ±0.9°F S, R & PR: ±1°C or ±1.8°F Temp. coefficient: ±0.02 %/°C (±0.01 %/°F) (at over 400°C or 750°F for R, S and PR) Response time: ≤ 0.5 sec. (0 – 90 %) Burnout response: ≤ 10 sec. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input to output or power) 500 V AC @ 1 minute (ch.1 to ch.2 input)

MODEL: 15TS 15TS SPECIFICATIONS ES-0612 Rev.8 Page 3/4 http://www.m-system.co.jp/ DIMENSIONS unit: mm (inch) 130 (5.12) 3 (.12) 50 (1.97) 82 (3.23) 2–4.3 (.17) dia. MTG HOLE TERMINAL COVER 6–M3.5 SCREW 8 (.31) 91 (3.58) 99 (3.90 ) 25 (.98) 1 2 5 6 7 8 TERMINAL ASSIGNMENTS 1 2 5 6 7 8 CJC SENSOR (model: CJM) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Output Driver CONNECTOR SZ POWER Ch.2 OUTPUT Ch.1 OUTPUT Low Drift Amplifier Burnout Protection T / C CJC SENSOR metal leg comp. leadwire Linearizer CJC Sensing Volt. Generatormodel: CJM T / C CJC SENSOR metal leg comp. leadwire model: CJM Isolation Output Driver SZ Low Drift Amplifier Burnout Protection Linearizer CJC Sensing Volt. Generator *Deleted with B thermocouple

MODEL: 15TS 15TS SPECIFICATIONS ES-0612 Rev.8 Page 4/4 http://www.m-system.co.jp/ Specifications are subject to change without notice.