15TQ060 IRF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Major Ratings and Characteristics IF(AV) Rectangular 15 A waveform VRRM 60 V IFSM @ tp = 5 µs sine 1000 A VF @ 15 Apk, TJ = 125°C 0.56 V TJ range - 55 to 150 °C Characteristics 15TQ060 Units Description/Features The 15TQ060 Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprie- tary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C T J operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability SCHOTTKY RECTIFIER 15 Amp 15TQ060 15TQ060S Bulletin PD-20563 rev. A 09/01 1www.irf.com Case Styles 15TQ060 15TQ060S TO-220AC Anode 1 3 C athode Base Cathode D2PAK Anode 1 3 Base Cathode N /C
15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 www.irf.com Part number 15TQ060 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Voltage Ratings IF(AV) Max. Average Forward Current 15 A 50% duty cycle @ TC = 104° C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 1000 5µs Sine or 3µs Rect. pulse Surge Current * See Fig. 7 260 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 6 mJ T J = 25 °C, IAS = 1.50 Amps, L = 11.5 mH IAR Repetitive Avalanche Current 1.50 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Parameters 15TQ Units Conditions A Absolute Maximum Ratings VFM Max. Forward Voltage Drop (1) 0.62 V @ 15A * See Fig. 1 0.82 V @ 30A
0.56 V @ 15A
0.71 V @ 30A
I RM Max. Reverse Leakage Current (1) 0.80 mA T J = 25 °C * See Fig. 2 45 mA T J = 125 °C CT Max. Junction Capacitance 720 pF V R = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 8.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/ µs (Rated VR) TJ = 25 °C TJ = 125 °C VR = rated VR Electrical Specifications Parameters 15TQ Units Conditions TJ Max. Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance Junction 3.25 °C/W DC operation * See Fig. 4 to Case RthCS Typical Thermal Resistance, Case to 0.50 °C/W Mounting surface , smooth and greased Heatsink wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Case Style TO-220AC JEDEC Kg-cm (Ibf-in) Thermal-Mechanical Specifications Parameters 15TQ Units Conditions (1) Pulse Width < 300µs, Duty Cycle < 2% Following any rated load condition and with rated VRRM applied
15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 www.irf.com Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 1000 0 0.4 0.8 1.2 1.6 2 Ins tantaneous F orward Current - I (A)F FM T = 1 5 0 C T = 1 2 5 C T = 2 5 C J J J F orward Volta ge Drop - V (V) 0.001 0.01 0.1 100 1000 0 1 02 03 04 05 06 0 R R 125 C 100 C 75 C 50 C 25 C R ever s e Current - I (mA) T = 150 CJ Re v e r se V o l t a g e - V ( V ) 100 1000 0 1 02 03 04 05 06 0 R T R evers e Voltage - V (V) Junction Capacitance - C (pF ) T = 2 5 CJ t 1, Rectangular Pulse Duration (Seconds) Thermal Impedance - Z thJC (°C/W) 0.001 0.01 0.1 Single Pulse (Thermal Resistance) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc PDM
15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 www.irf.com Fig. 8 - Unclamped Inductive Test Circuit Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current FREE-WHEEL DIODE 40HFL40S02CURRENT MONI TOR HIGH-SPEED SWITCHIRFP460 L DUT Rg = 25 ohm Vd = 25 Volt+ 100 110 120 130 140 150 0 5 10 15 20 25 DC Allowable Cas e T emperature - ( C) F( A V ) /G73/G65/G65/G20/G6E/G6F/G74/G65/G20/G28/G32/G29 S quare wave (D = 0.50) 80% R ated V appliedR Average F orward Current - I (A) 100 1000 10 100 1000 10000 FSMNon-R epetitive S urge Current - I (A) p At Any R ated L oad Condition And With R ated V Applied F ollowing S urge RRM S quare Wave P uls e Duration - t (micros ec) 02468 1 0 1 2 1 4 1 6 1 8 2 0 2 2 DC Average P ower L os s - (Watts ) F( A V ) RM S Li m i t D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Average F orward Current - I (A) (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR
15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 www.irf.com 10.16 (0.40) REF. 8.89 (0.35) 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) RE F. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 6.18 (0.24)93° REF. 2.61 (0.10) 2.32 (0.09) 5.28 (0.21) 4.78 (0.19) 4.69 (0.18) 4.20 (0.16) 0.55 (0.02) 0.46 (0.02) 14.73 (0.58) 15.49 (0.61) 1.40 (0.055) 1.14 (0.045)3X 0.93 (0.37) 0.69 (0.27)2X 11.43 (0.45) 17.78 (0.70) 8.89 (0.35) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) MINIMUM RECOMMENDED FOOTPRINT Outline Table Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) 3.78 (0.15) 3.54 (0.14) 10.54 (0.41) MAX. DIA. 15.24 (0.60) 14.84 (0.58) 2.92 (0.11) 2.54 (0.10) TERM 2 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 0.94 (0.04) 0.69 (0.03) 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.48 (0.25) 6.23 (0.24) 0.10 (0.004) 1.40 (0.05) 1.15 (0.04) 2.89 (0.11) 2.64 (0.10) 2.04 (0.080) MAX. Conform to JEDEC outline TO-220AC Dimensions in millimeters and (inches) Anode 1 3 Base Cathode N /C Anode 1 3 Cathode Base Cathode
15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 09/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.