15TQ045 HY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

  • Low power loss, high efficiency
  • High current capability, low VF RoHS
  • High surge capacity COMPLIANT Mechanical Data
  • Case: JEDEC R-6 molded plastic
  • Polarity: Color band denotes cathode
  • Mounting position: Any Note: Products with logo or are made by HY Electronic (Cayman) Limited.

Applications

  • For use in solar cell junction box as a bypass diode Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Unit VRRM V VRMS V VDC V IF=5.0A IF=7.5A IF=15A IF=5.0A IF=7.5A IF=15A TJ=25℃ uA TJ=125℃ mA Typical Junction Capacitance CJ pF RθJA(3) ℃/W RθJL(3) ℃/W RθJL(4) ℃/W TOP ℃ TSTG ℃ Notes: 1. 300uS pulse width, 1%duty cycle. 2.Pulse test: 40mS pulse width. 3. Without heatsink, free air, units mounted on PCB with 2 mm Χ 2 mm copper pad areas at 9.5 mm lead length. 4. Leads clipped at 3 mm lead length from plastic body on 7.0 cm Χ 2.2 cm Χ 1.9 cm Χ 2 heatsink 5. Meets the requirements of IEC61215 ed. 2 bypass diode thermal test. 15TQ045-A-00-00 6. The typical data above is for reference only . Rev. 11, 18-May-2020 A A V Photovoltaic Solar Cell Protection Schottky Diode 200 ≤200Junction Temperature in DC Forward Current Without reverse bias, t≤1h (fig. 2) (Note 5) Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient 55 3.5 0.44 (Typ.) 0.54 (Max.) 11.6 (Typ.) 800 (Max.) Peak Forward Voltage (Note1) Maximum DC Reverse Current (Note 2) VR=45V TJ=25℃ TJ=125℃ VF IR TJ 2.5 Operating Junction Temperature Range -40 to +150 Storage Temperature Range -40 to +175 4.0V, 1MHz 1290 (Typ.) Superimposed on Rated Load (JEDEC Method) 0.44 (Typ.) I(AV) IFSM 7.5 (Typ.) 25 (Max.) 0.46 (Typ.) 0.51 (Typ.) 0.59 (Max.) 0.33 (Typ.) 0.36 (Typ.) Maximum Average Forward(With heatsink) 15 Rectified Current (Without heatsink, free air) 6 Peak Forward Surge Current, 8.3mS Single Half Sine-Wave, Maximum Repetitive Peak Reverse Voltage 45 Maximum RMS Voltage 31.5 Maximum DC Blocking Voltage 45 www.hygroup.com.tw Package Outline Dimensions in Inches (Millimeters) Characteristics 15TQ045 15TQ045 Reverse Voltage - 45Volts Forward Current - 15.0 Amperes Pb TC measurement point All d ata sheet.com

Rating and Characteristic Curves 15TQ045 The curve above is for reference only. 15TQ045-A-00-00 Rev. 11, 18-May-2020 FIG. 3 - Forward Power Loss Characteristics Average Power Loss(W) Average Forward Current (A) 0 2 4 6 8 10 12 14 16 18 D=1.0 D=0.1 D=0.3 D=0.2 D=0.5 D=0.8 Instantaneous Reverse Current (mA) Fig. 4 - Typical Reverse Characteristics 0.01 0.1 100 20 40 60 80 100 TJ=25°C TJ=75°C TJ=100°C TJ=125°C Percent of Rated Peak Reverse Voltage (%) 0.1 0 0.2 0.4 0.6 0.8 1 TJ=25°C TJ=75°C TJ=100°C TJ=125°C Pulse Width 300uS 2%Duty Cycle Fig. 5 - Typical Forward Characteristics Instantaneous Forward Current (A) Instantaneous Forward Voltage (V) Fig. 6 - Typical Junction Capacitance Capacitance (pF) 100 1000 10000 0.1 1 10 100 TJ=25°C,f=1MHz Reverse Voltage (V) 0 50 100 150 200 Fig. 1 - Forward Current Derating Curve Average Forward Current Case Temperature (℃) In DC Mode 100 150 200 250 1 10 100 Peak Forward Surge Current (A) Number of Cycles at 60Hz Fig. 2 - Maximum Non-Repetitive Surge Current 8.3mS Single Half-Sine-Wave (JEDEC METOD) Wth Heatsink Wthout Heatsink All d ata sheet.com

ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require- ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi- lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet- ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers- onnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of HY. Product names and markings noted herein may be trademarks of their respective owners. Rev. 11, 18-May-2020 Disclaimer All d ata sheet.com