DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
■ Surface Mount SMC package ■ Breakdown Voltage: 6.8 to 130 volts ■ Power Dissipation: 1500 watts ■ RoHS compliant* and halogen free ■ AEC-Q101 compliant*
Applications
■ Protection of power buses ■ Protection of I/O interfaces ■ Overvoltage transient protection ■ Telecom, computer, industrial and consumer electronics applications Additional Information Click these links for more information: PRODUCT SELECTOR TECHNICAL LIBRARY INVENTORY SAMPLES CONTACT General Information Manufacturers of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 130 V. Typical fast response times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices from 0 V to Minimum Breakdown Voltage. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 1500 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 200 Amps Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) VF 3.5 Volts Operating Temperature Range T J -55 to +150 °C Storage Temperature Range T STG -55 to +150 °C 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above T A = 25 °C per Pulse Derating Curve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order 1.5SMC 6.8 CA - Q Series 1.5SMC = SMC/DO-214AB Breakdown Voltage 6.8 ~ 130 = 6.8 to 130 VBR Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device AEC-Q101 Suffix Q = AEC-Q101 Compliant, 13-inch reel (3000 pcs.) Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com * RoHS Directive 2015/863, Mar 31, 2015 and Annex. Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. *** Q suffix for applications requiring appropriate AEC-Q101 compliance for electronic limiters. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
1.5SMC-Q Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Bidirectional Device Breakdown Voltage VBR (Volts) Working Peak Reverse Voltage Maximum Reverse Leakage @ VRWM Maximum Clamping Voltage @ Ipp (10/1000 μs) Maximum Peak Pulse Current (10/1000 μs) Maximum Clamping Voltage @ Ipp (8/20 μs) Maximum Peak Pulse Current (8/20 μs) Part No. Marking Part No. Marking Min. Max. @ IT (mA) VRWM (V) IR (μA) V c (V) I pp (A) V c (V) I pp (A) 1.5SMC110A-Q 110AQ 1.5SMC110CA-Q 110CQ 105 116 1 94 1 152 10 198 50 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. NEW! NEW! Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
1.5SMC-Q Transient Voltage Suppressor Diode Series Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Forward Surge Current 100 05 0 25 75 100 150 125 175 200 TA - Ambient Temperature (°C) Peak Pulse Power (PPP) or Current (IPPM) Derating (%) 100 120 140 160 180 200 001011 Number of Cycles at 60 Hz IFSM - Peak Forward Surge Current (A) Pulse Waveform Typical Junction Capacitance 150 100 0 1.0 2.0 3.0 4.0 t - Time (ms) IPPM - Peak Pulse Current (% IRSM) td tr=10 µsec. Peak value (IPPM) Pulse width (td) is defined as the point where the peak current decays to 50 % of IPPM 10 x 1000 µsec. waveform as defined by R.E.A. IPPM 2Half value = TJ = 25 °C 100 1000 10000 100000 1 10 100 1000 Unidirectional @ VR TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p CJ - Junction Capacitance (pF) Bidirectional V = 0 V Unidirectional V = 0 V Bidirectional @ VR VBR - Reverse Breakdown Voltage (V) Peak Pulse Power Rating Steady State Power Derating Curve 100 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms td - Pulse Width (Seconds) PPPM - Peak Pulse Power (kW) 8.0 (0.31) 8.0 (0.31)x COPPER PAD AREAS 6.5 1.0 0.5 1.5 2.0 3.0 2.5 3.5 4.0 5.0 4.5 5.5 6.0 0.0 05 0 25 75 100 150 125 TL - Lead Temperature (°C) Steady State Power Dissipation (W)
1.5SMC-Q Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint B CATHODE BAND (FOR UNIDIRECTIONAL PRODUCTS ONLY) G F D C H E A Dimension SMC (DO-214AB) A 6.60 - 7.11 (0.260 - 0.280) B 5.59 - 6.22 (0.220 - 0.245) C 2.90 - 3.20 (0.115 - 0.125) D 0.15 - 0.31 (0.006 - 0.012) E 7.75 - 8.13 (0.305 - 0.320) F 0.203 MAX. (0.008) G 2.00 - 2.62 (0.079 - 0.103) H 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: MM (INCHES) DIMENSIONS: MM (INCHES) a c b Dimension SMC (DO-214AB) a (Max.) 4.69 (0.185) b (Min.) 3.07 (0.121) c (Min.) 1.52 (0.060) Physical Specifications No cathode band indicates bidirectional device Environmental Specifications Typical Part Marking YWW XXXXX MANUFACTURER’S TRADEMARK DATE CODE: Y = LAST DIGIT OF YEAR WW = WEEK NUMBER DEVICE ID Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
1.5SMC-Q Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P A F E T 120 ° D D1 C Index Hole W B 10 pitches (min.) Direction of Feed 10 pitches (min.) End Trailer Device Unidirectional Product Orientation Leader Start d DIMENSIONS: MM (INCHES) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Item Symbol SMC (DO-214AB) 13-Inch Reel Carrier Width A 6.0 ± 2.0 (0.236 - 0.079) Carrier Length B 8.3 ± 0.20 (0.327 ± 0.008) Carrier Depth C 2.5 ± 0.20 (0.098 ± 0.008) Sprocket Hole d 1.50 ± 0.10 (0.059 ± 0.004) Reel Outside Diameter D 330 (12.992) Reel Inner Diameter D 1 50.0 (1.969) MIN. Feed Hole Diameter D 2 13.0 +0.50/-0.20 Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 7.50 ± 0.10 (0.295 ± 0.004) Punch Hole Pitch P 8.00 ± 0.10 (0.315 ± 0.004) Sprocket Hole Pitch P 0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P 1 2.00 ± 0.10 (0.079 ± 0.004) Overall Tape Thickness T 0.30 ± 0.10 (0.012 ± 0.004) Tape Width W 16.00 ± 0.30 (0.630 ± 0.012) Reel Width W 1 22.4 (0.882) MAX. Quantity per Reel -- 3000 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. REV. 10/20
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS\¸)V\\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\\[UV[PJL<ZLYZZOV\\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM\[OH[Z\\JOPUMVYTH[PVUPZJ\\YYLU[ and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns ®WYVK\\J[PUH\\ZLYHWWSPJH[PVUTH\]HY\ MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\\L[VP[OLJVTIPUH[PVUVM[OL)V\\YUZ® product with other components PU[OL\\ZLY»ZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\\YUZ® WYVK\\J[HSZVJHUHUKKV]HY\PUKPɈLYLU[HWWSPJH[PVUZHUKHJ[\\HSWLYMVYTHUJLTH\]HY\V]LY[PTL<ZLYZZOV\\SKHS^H\Z]LYPM\ the actual performance of the Bourns ®WYVK\\J[PU[OLPYZWLJPÄJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[ Q\\KNTLU[ZYLNHYKPUN[OLHTV\\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY KPɈLYLUJLZIL[^LLUSHIVYH[VY\HUKYLHS^VYSKJVUKP[PVUZ <USLZZ)V\\YUZOHZL_WSPJP[S\KLZPNUH[LKHUPUKP]PK\\HS)V\\YUZ® product as meeting the requirements of a particular industry Z[HUKHYKLN0:6;: VYHWHY[PJ\\SHYX\\HSPÄJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\\YUZPZUV[YLZWVUZPISLMVYHU\ MHPS\\YLVMHUPUKP]PK\\HS)V\\YUZ®WYVK\\J[[VTLL[[OLYLX\\PYLTLU[ZVMZ\\JOPUK\\Z[Y\Z[HUKHYKVYWHY[PJ\\SHYX\\HSPÄJH[PVU<ZLYZ of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to [OLPYKL]PJLZVYHWWSPJH[PVUZ Bourns®WYVK\\J[ZHYLUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKMVY\\ZLPUU\\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\\Z[HPUPUN HWWSPJH[PVUZUVYPUHU\V[OLYHWWSPJH[PVUZ^OLYLMHPS\\YLVYTHSM\\UJ[PVUTH\YLZ\\S[PUWLYZVUHSPUQ\\Y\KLH[OVYZL]LYLWYVWLY[\ VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZS\HUKZWLJPÄJHSS\HWWYV]LKPU^YP[PUNI\[^VH\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZ on a case-by-case basis, use of any Bourns ®WYVK\\J[ZPUZ\\JO\\UH\\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\\ZPZH[ [OL\\ZLY»ZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\\KLKL]PJLZPKLU[PÄLKI\[OL<:-VVKHUK+Y\\N(KTPUPZ[YH[PVUHZ*SHZZ000 KL]PJLZHUKNLULYHSS\LX\\P]HSLU[JSHZZPÄJH[PVUZV\\[ZPKLVM[OL<UP[LK:[H[LZ )V\\YUZL_WYLZZS\PKLU[PÄLZ[OVZL)V\\YUZ ®Z[HUKHYKWYVK\\J[Z[OH[HYLZ\\P[HISLMVY\\ZLPUH\\[VTV[P]LHWWSPJH[PVUZVUZ\\JO WYVK\\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS\HUKZWLJPÄJHSS\HWWYV]LKPU^YP[PUNI\[^V H\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZVUHJHZLI\JHZLIHZPZ\\ZLVMHU\V[OLY)V\\YUZ®Z[HUKHYKWYVK\\J[ZPUHUH\\[VTV[P]L HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\\ZPZUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKHUKPZH[[OL\\ZLY»ZZVSLYPZR0M)V\\YUZ L_WYLZZS\PKLU[PÄLZHZ\\IJH[LNVY\VMH\\[VTV[P]LHWWSPJH[PVUPU[OLKH[HZOLL[MVYP[ZZ[HUKHYKWYVK\\J[ZZ\\JOHZPUMV[HPUTLU[ VYSPNO[PUNZ\\JOPKLU[PÄJH[PVUTLHUZ[OH[)V\\YUZOHZYL]PL^LKP[ZZ[HUKHYKWYVK\\J[HUKOHZKL[LYTPULK[OH[PMZ\\JO)V\\YUZ Z[HUKHYKWYVK\\J[PZJVUZPKLYLKMVYWV[LU[PHS\\ZLPUH\\[VTV[P]LHWWSPJH[PVUZP[ZOV\\SKVUS\IL\\ZLKPUZ\\JOZ\\IJH[LNVY\VM H\\[VTV[P]LHWWSPJH[PVUZ(U\YLMLYLUJL[V)V\\YUZ ®Z[HUKHYKWYVK\\J[PU[OLKH[HZOLL[HZJVTWSPHU[^P[O[OL(,*8Z[HUKHYK VY¸H\\[VTV[P]LNYHKL¹KVLZUV[I\P[ZLSMTLHU[OH[)V\\YUZOHZHWWYV]LKZ\\JOWYVK\\J[MVY\\ZLPUHUH\\[VTV[P]LHWWSPJH[PVU Bourns®Z[HUKHYKWYVK\\J[ZHYLUV[[LZ[LK[VJVTWS\^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS\ VYHU\V[OLYNLULYHSS\LX\\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\\J[ZKLZPNULKVYTHU\\MHJ[\\YLKMVY \\ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\\YUZL_WYLZZS\PKLU[PÄLZ)V\\YUZ® standard products that are suitable for use in aircraft VYZWHJLHWWSPJH[PVUZVUZ\\JOWYVK\\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS\HUKZWLJPÄJHSS\ HWWYV]LKPU^YP[PUNI\[^VH\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZVUHJHZLI\JHZLIHZPZ\\ZLVMHU\V[OLY)V\\YUZ ® standard WYVK\\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\\ZPZUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKHUKPZH[ the user’s sole risk. ;OL\\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\\YUZ ® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns®J\\Z[VTWYVK\\J[ZHYLZWLJPHSS\KLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\\YUZ HUK[OL\\ZLYYLNHYKPUN[OL\\ZLHUKSL]LSVMZ\\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\\YUZ® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns®WYVK\\J[ZVY[LJOUVSVN\MVY\\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL KLZPNUKL]LSVWTLU[WYVK\\J[PVU\\ZLVYZ[VJRWPSPUNVMU\\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL\\\ZL Bourns®WYVK\\J[ZVY[LJOUVSVN\PUHU\MHJPSP[\^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ HWWS\[VHSS\\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\\KPUNLTIHYNVZVYPU[LYUH[PVUHS YLN\\SH[PVUZ-\\Y[OLY)V\\YUZ® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without WYPVYH\\[OVYPaH[PVUMYVT)V\\YUZHUKVY[OL<:.V]LYUTLU[ILYLZVSK[YHUZMLYYLKVYYLL_WVY[LK[VHU\WHY[\UV[LSPNPISL [VYLJLP]L<:JVTTVKP[PLZZVM[^HYLHUK[LJOUPJHSKH[H ;V[OLTH_PT\\TL_[LU[WLYTP[[LKI\HWWSPJHISLSH^)V\\YUZKPZJSHPTZPHU\HUKHSSSPHIPSP[\MVYZWLJPHSW\\UP[P]LJVUZLX\\LU[PHS PUJPKLU[HSVYPUKPYLJ[KHTHNLZVYSVZ[YL]LU\\LZVYSVZ[WYVÄ[ZHUKPPHU\HUKHSSPTWSPLK^HYYHU[PLZPUJS\\KPUNPTWSPLK^HYYHU[PLZ VMÄ[ULZZMVYWHY[PJ\\SHYW\\YWVZLUVUPUMYPUNLTLU[HUKTLYJOHU[HIPSP[\ )RU\\RXUFRQYHQLHQFHFRSLHVRIWKLV/HJDO'LVFODLPHU1RWLFHZLWK*HUPDQ6SDQLVK-DSDQHVH7UDGLWLRQDO&KLQHVHDQG6LPSOLÀHG&KLQHVH bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf