15S035

63K524 ELMA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 31

Technical content

www.elma.com10|24 1|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET STYLEBOX 15 E-MOTION Product description MAIN FEATURES Stylebox 15 e-motion is a portable desktop case accor - ding to the 19'' standards. It is a platform that was built according to the IEC60297 standard. The scalable EMC protection, color and design variants make it the first choice for high-end electronics. The top design, the variety of sizes and variants as well as the wide range of accessories create ideal conditions for a variety of applications such as controls, measuring devices or computer systems. › Case system: 4 longitudinal aluminum profiles and 2 side walls as a supporting frame | sheet steel cladding › The front of the case can be fitted as required with cover brackets, front handles or 19'' fixing brackets - this permits subsequent conversion from a desktop case to a 19'' module unit and vice-versa › Mounting dimensions according to IEC60297 › Numerous accessories › Internal mounting chassis › Horizontal and vertical insertion of Eurocard PCBs › Elegant design PRODUCT VARIETY ■ Cover plates bolted to the side ■ Front of the enclosure can be equipped with cover brackets, front handles or 19'' fixing brackets ■ Colorless passivated inside of the cladding ■ Longitudinal profiles colorless passivated (enable a large area contacting for optimal EMC protection) ■ Top and bottom plates on the contact surfaces color-free ■ Optional EMC seals for increased EMC protection ■ Optional folding feet for use in installation angles POSSIBLE CUSTOMIZATIONS ■ Different sizes ■ Colors: White, silver (other colors on request) ■ Customizations ■ Standard or customized front panels ■ Optional scalable EMC shielding ■ Rear I/Os possible TYPICAL APPLICATIONS ■ 19'' subrack systemes (e.g. for IEC or IEEE controller cards) ■ Measurement and test instruments ■ Laboratory or field instruments ■ Medical equipment

www.elma.com10|24 2|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Types SIZES ■ Height: 2 to 7 U ■ Width: 42 | 63 | 84 HP ■ Depth: 245, 305, 395 or 500 mm Width Height 42 HP 63 HP 84 HP 2 U 3 U 4 U 6 U 7 - 9 U (on request) Depth 245 mm 305 mm 395 mm 500 mm EXECUTIONS Table case with cover brackets Table case with front handle Table case with bow handle 19'' slide-in enclosure with front handles 19'' slide-in enclosure without front handles

www.elma.com10|24 3|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Types COLORS ■ White ■ Silver ■ Other colors on request SPECIAL FEATURES ■ Increased EMC shielding on request ■ Rear inputs and outputs CUSTOMIZATIONS ■ Standardized or customized front panels ■ Customized front and rear panels on request EMC VARIANTS EMC CONSTRUCTION AND CONFIGURATION Basic level Advanced level Superior level Size: 4 U x 84 HP x 395 mm Standard front panel (cover panels perforated and unperforated) Size: 4 U x 84 HP x 395 mm EMC front panels and gasket kit (cover panels perforated and unperforated) Size: 4 U x 84 HP x 395 mm EMC front panels and gasket kit (cover panels perforated and unperforated)

www.elma.com10|24 4|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Types EMC PROTECTION Electromagnetic comptability is the ability of a system to operate in the intended environment without causing or suffering unacceptable degradation of performance due to unintentinal electromagnetic radiation or response. The EMC character- stics of a system therefore consist of an appropriate immunity from interference (noise immunity) and a limited emission of interference (noise emission). Elma’s EMC concept describes three levels of electromagnetic shielding performance (performance level). The attenuation levels will simplify the selection of sub racks for the user. Test setup: The first measurement E1 is without the enclosure. The next measurement E2 is made with the transmitting antenna installed inside the enclosure. The difference between the received signal without and with the enclosure represents the shielding effectiveness in dB. The standard configuration will provide you with a basic (Stylebox 15 Standard or e-motion) or an advanced EMC level (Stylebox 15 smart). If you require an advanced or superior EMC level for your system, you need to order additional EMC parts. Performance level 30 - 230 MHz 230 - 1000 MHz 1000 - 2000 MHz

1 Elma Basic level 20 dB 10 dB 0 dB

2 Elma Advanced level 40 dB 30 dB 20 dB

3 Elma Superior level 60 dB 50 dB 40 dB

Basic EMC level Case size 4 U-x-42 HP-x-245 mm (9.64'') with standard front panels (cover panels perforated and unperforated) Basic EMC level Case size 4 U-x-84 HP-x-395 mm (15.55'') with standard front panels (cover panels perforated and unperforated) Advanced EMC level Case size 4 U-x-84 HP-x-395 mm (15.55'') with EMC front panels and gasket set for advanced EMC level (cover panels perforated and unperforated) Superior EMC level Case size 4 U-x-84 HP-x-395 mm (15.55'') with EMC front panels and gasket set for superior EMC level (cover panels perforated and unperforated)

www.elma.com10|24 5|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Product structure CONFIGURATION STYLEBOX 15 E-MOTION COMPILATION 1. WIDTH 42 / 63 / 84 HP Frame 2. HEIGHT 2 / 3 / 4 / 6 / 7 U | handles Frame 4. TOP COVER solid or perforated Covers 10. ADAPATION KITS 7. SIDE PANELS solid or perforated portable desktop Covers 8. PORTABLE DESKTOP HANDLE Covers 9. TOWER FEET Covers 5. BOTTOM COVER solid or perforated Covers 11. ASSEMBLY ACCESSORIES 6. FEET Covers 12. FRONT PANELS 3. DEPTH 245 / 305 / 395 / 500 mm Frame Top cover Internal side panel Side panel Bottom cover Feet Tapped strip Front extrusion Cover plate Cover plate Corner set Front handle

www.elma.com10|24 6|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Product structure WIDTH ■ Aluminum profile, electrically conductive Scope of delivery: ■ 4 front / rear extrusions ■ 4 tapped strips M 2.5 ■ 1 set of 16 screws torx T20 (M4 x 10) Description 42 HP 63 HP 84 HP IEC application 15S035 15S036 15S037 BEZELS ■ 19'' version do not allow additional cover brackets ■ Profiles and die-cast parts: Aluminum, powder coated or wet painted, contact area conductive Scope of delivery: ■ 1 brackets ■ 4 pieces have to be ordered (for front and rear side) Bracket Front handle 19'' bracket with front handle 19'' bracket Rear feet corner set plus coverplate Description Color 2 U 3 U 4 U 6 U Bracket White 15-242-70 15-243-70 15-244-70 15-246-70 Silver 15-242-80 15-243-80 15-244-80 15-246-80 for design front panel White 15-242-01-70 15-243-01-70 15-244-01-70 15-246-01-70 Silver 15-242-01-80 15-243-01-80 15-244-01-80 15-246-01-80 Front handle White 15-222-70 15-223-70 15-224-70 15-226-70 Silver 15-222-80 15-223-80 15-224-80 15-226-80 for design front panel White 15-22-01-70 15-223-01-70 15-224-01-70 15-226-01-70 Silver 15-222-01-80 15-223-01-80 15-224-01-80 15-226-01-80 19'' bracket White 15-232-70 15-233-70 15-234-70 15-236-70 Silver 15-232-80 15-233-80 15-234-80 15-236-80 for design front panel White 15-232-01-70 15-233-01-70 15-234-01-70 15-236-01-70 Silver 15-232-01-80 15-233-01-80 15-234-01-80 15-236-01-80 19'' bracket White 15-182-70 15-183-70 15-184-70 15-186-70 Silver 15-182-80 15-183-80 15-184-80 15-186-80 for design front panel White 15-212-70 15-213-70 15-214-70 15-216-70 For 7 to 9 U: Multi-part handle on request

www.elma.com10|24 7|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET DEPTH ■ Internal side panel 2 mm aluminum, clear passivated Sope of delivery: ■ 1 internal side panel ■ 2 pieces have to be ordered (for left and right side) Height 245 mm 9.64'' 305 mm 12.00'' 395 mm 15.55'' 500 mm 19.68''

2 U 15-520 15-522 15-524 -

3 Z 15-530 15-532 15-534 15-536

4 U left 15-540 15-542 15-544 15-546

4 U right 15-541 15-543 15-545 15-547

6 U - 15-562 15-564 15-566

7 U - 15-572 15-574 15-576

■ Symmetrical construction: Perforation can be used at front or rear ■ 0.75 mm sheet steel powder coated or wet painted, contact area conductive Scope of delivery: ■ 1 top cover Description Width Depth 245 mm 9.64'' 305 mm 12.00'' 395 mm 15.55'' 500 mm 19.68'' Solid, white 42 HP 15B201-70 15B202-70 15B203-70 15B204-70 Solid, silver 15B201-80 15B202-80 15B202-80 15B202-80 Perforated, white 15B201-71 15B202-71 15B203-71 15B204-71 Perforated, silver 15B201-81 15B202-81 15B203-81 15B204-81 Solid, white 63 HP 15B206-70 15B207-70 15B208-70 15B209-70 Solid, silver 15B206-80 15B207-80 15B208-80 15B209-80 Perforated, white 15B206-71 15B207-71 15B208-71 15B209-71 Perforated, silver 15B206-81 15B207-81 15B208-81 15B209-81 Solid, white 84 Hp 15B210-70 15B212-70 15B213-70 15B214-70 Solid, silver 15B210-80 15B212-80 15B213-80 15B214-80 Perforated, white 15B210-71 15B212-71 15B213-71 15B214-71 Perforated, silver 15B210-81 15B212-81 15B213-81 15B214-81 Product structure SUPPORT FEET Support feet and according bezels Description Color 2 U 3 U 4 U 6 U Rear Feet Black 15S090 15S090 15S090 15S090 Plus cover panel White 66-686-060-70 66-686-105-70 66-686-149-70 66-686-238-70 Silver 66-686-060-80 66-686-105-80 66-686-149-80 66-686-238-80

www.elma.com10|24 8|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Product structure BOTTOM COVER ■ Symmetrical construction: Perforation at front or rear ■ 0.75 mm sheet steel powder coated or wet painted, contact area conductive Scope of delivery: ■ 1 bottom cover with mounted feet Description Width Depth 245 mm 9.64'' 305 mm 12.00'' 395 mm 15.55'' 500 mm 19.68'' Solid, white 42 HP 15B301-70 15B302-70 15B303-70 15B304-70 Solid, silver 15B301-80 15B302-80 15B303-80 15B304-80 Perforated, white 15B301-71 15B302-71 15B303-71 15B304-71 Perforated, silver 15B301-81 15B302-81 15B303-81 15B304-81 Solid, white 63 HP 15B306-70 15B307-70 15B308-70 15B309-70 Solid, silver 15B306-80 15B307-80 15B308-80 15B309-80 Perforated, white 15B306-71 15B307-71 15B308-71 15B309-71 Perforated, silver 15B306-81 15B307-81 15B308-81 15B309-81 Solid, white 84 HP 15B310-70 15B312-70 15B313-70 15B314-70 Solid, silver 15B310-80 15B312-80 15B313-80 15B314-80 Perforated, white 15B310-71 15B312-71 15B313-71 15B314-71 Perforated, silver 15B310-81 15B312-81 15B313-81 15B314-81 FEET ■ With and without tilt feet ■ Glass-fiber reinforced plastic, UL94 V-0 ■ Including screws 3.5 x 8 size T10 ■ Up to 30 kg carring capacity per set Scope of delivery: ■ 2 + 2 case feet, incl. rubber inserts NBR ■ 8 countersunk PT-screws torx T10 (3.5 x 8) Description Color Part No. Case feet 2 x a + 2 x b Light grey (RAL 7035) 63K524 Case feet 2 x a + 2 x b Black (RAL 9005) 63K526 Case feet 2 x a + 2 x b Dark grey (special) 63K525 TOWER FEET ■ Plastic and aluminum (mounted direct onto side panel) Scope of delivery: ■ 4 round feet, Ø 40 mm ■ 4 round head screws with integrated washer torx T10 (M3 x 8) Description Part No. Set of tower feet 63-880

www.elma.com10|24 9|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET SIDE PANELS ■ Side panel 2 mm aluminum, clear passivated Scope of delivery: ■ 1 inner side wall ■ 2 pieces have to be ordered (for left and right side) Product structure PORTABLE DESKTOP HANDLE Scope of delivery: ■ 2 adapters ■ 2 side parts, black ■ 1 handle extrusion, soft feel ■ Assembly material, torx Description Depth Height mm inch 2 U 3 U 4 U 6 U 7 U Solid, white 245 9.64 15B601-70 15B606-70 15B610-70 - - Solid, silver 15B601-80 15B606-80 15B610-80 - - Solid, white for portable desktop 15B657-70 15B661-70 15B665-70 - - Solid, silver for portable desktop 15B657-80 15B661-80 15B665-80 - - Solid, white 305 12.00 15B602-70 15B607-70 15B612-70 15B622-70 15B627-70 Solid, silver 15B602-80 15B607-80 15B612-80 15B622-80 15B627-80 Solid, white for portable desktop 15B658-70 15B662-70 15B667-70 - - Solid, silver for portable desktop 15B658-80 15B662-80 15B667-80 - - Solid, white 395 15.55 15B603-70 15B608-70 15B613-70 15B623-70 15B628-70 Solid, silver 15B603-80 15B608-80 15B613-80 15B623-80 15B628-80 Solid, white for portable desktop 15B659-70 15B663-70 15B668-70 - - Solid, silver for portable desktop 15B659-80 15B663-80 15B668-80 - - Solid, white 500 19.68 - 15B609-70 15B614-70 15B624-70 15B629-70 Solid, silver - 15B609-80 15B614-80 15B624-80 15B629-80 Solid, white for portable desktop - 15B664-70 15B669-70 - - Solid, silver for portable desktop - 15B664-80 15B669-80 - - ASSEMBLY MATERIAL FOR 1 SIDE PANEL Description Part No. 4 countersunk screws torx T10 (M3 x 6) 63K800 Height 42 HP 63 HP 84 HP

2 HP 15S050 15S051 15S052

3 and 4 HP 15S053 15S054 15S055

www.elma.com10|24 10|31 t T DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Drawings and dimensions DIMENSION DRAWINGS SIDE VIEW FRONT VIEW U Height H Height Hs mm inch mm inch 2 88.05 3.46 68.05 2.67 3 132.50 5.21 112.50 4.42 4 176.95 6.96 156.95 6.17 6 265.85 10.46 245.85 9.67 7 310.3 12.21 290.30 11.43 HP Width B Width b mm inch mm inch 42 235.2 9.25 213.4 8.4 63 341.9 13.46 320.1 12.6 84 448.6 17.66 426.8 16.8 Depth T Depth t mm inch mm inch 245 9.64 232.6 9.15 305 12.00 292.6 11.51 395 15.55 382.6 15.06 500 19.68 487.6 19.19 Feet type Feet I mm inch e-motion 21.5 0.89 TOP VIEW Air flow HP Depth M K L mm mm mm2 mm mm 42 245 / 305 / 395 / 500 208 8680 40 47.2 63 245 / 305 / 395 / 500 323 13510 40 47.2 84 245 / 305 / 395/ 500 415 17370 40 47.2 HP Depth M K L inch inch sq. inch inch inch

www.elma.com10|24 11|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Drawings and dimensions SIDE PANELS

2 U 3 U

T 2 U 245/305/395 Longitudinal sections for placement in 15 mm grid 245/305/395/500 T 3 U

4 U 6 U

www.elma.com10|24 12|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET ADAPTATION KITS A Range of application: ■ Single Eurocard with depth 160 to 280 mm ■ Backplanes ■ Modules, cassettes, plug-in units ■ Set for horizontal mounting of single, double triple Eurocard, with depth 160 to 280 mm ■ Crossflow ventilation with 3 U fan module ■ Drive mechanism receptacles 3 1/2'' | 5 1/4'' Scope of delivery: ■ 2 internal extrusions ■ 2 insulating strips (only 15K0xx - 6) ■ 2 tapped strips M2.5 ■ 1 set assembly material, torx 6 U 160 / 220 / 280 T 140 7 U 140 T IEC only 4 U 60 140 T 6 U T 140 3 U 60 80 T 3 U 160 / 220 / 280 T 140 6 U 160 / 220 / 280 T 140 7 U 140 T IEC only 4 U 60 140 T 6 U T 140 3 U 60 80 T 3 U 160 / 220 / 280 T 140 Adaptation kits INFORMATION Adaptation kits are used to subdivide the both in its depths and heights. The adaptation kits for the flush or recess mounted circuit boards or cassettes include the necessary internal extrusions and assembly materials. Information for adaptation kits a - f: 15-xxx- x for mounting: 6 = Extrusion 66-193, for insulated backplane mounting 7 = Extrusion 66-194, for conductive backplane mounting Description 42 HP 63 HP 84 HP Flush front-mounting of single Eurocards 15K041-6 15K031-6 15K011-6 15K041-7 15K031-7 15K011-7 ADAPTATION KITS B Range of application: ■ Recessed mounting of single Eurocards, with depth 160 to 220 mm ■ Without individual front panels ■ Backplanes Scope of delivery: ■ 4 internal extrusions ■ 2 insulating strips (only 15K0xx - 6) ■ 2 tapped strips M2.5 ■ 1 set assembly material, torx Description 42 HP 63 HP 84 HP Recessed mounting of single Eurocards without front panels 15K042-6 15K032-6 15K012-6 15K042-7 15K032-7 15K012-7

www.elma.com10|24 13|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Adaptation kits ADAPTATION KITS C Reduction kit 1/3 U + 2/3 U for 60 mm recessed mounting Range of application: ■ Recessed mounting of single Eurocards, with depth 160 to 220 mm ■ With or without individual front panels ■ Max. fan height 26 mm ■ Backplanes ■ Modules, cassettes, plug-in units ■ Drive mechanism receptacles 5 1/4'' Scope of delivery: ■ 2 internal extrusions ■ 2 longitudinal extrusions 66-1 1 1 (IEC) or 66-677 (IEEE) ■ 2 insulating strips (only 15K0xx - 6) ■ 1 auxiliary cover top ■ 1 auxiliary cover bottom ■ 4 tapped strips M2.5 ■ 1 set assembly material, torx ADAPTATION KITS D Range of application: ■ Double Eurocards with depth 160 to 280 mm ■ Backplanes ■ Modules, cassettes, plug-in units ■ Drive mechanism receptacles 3 1/2'' | 5 1/4'' Scope of delivery: ■ 2 internal extrusions ■ 1 centre extrusion ■ 4 insulating strips ■ 4 tapped strips M2.5 ■ 2 set assembly material, torx ADDITIONAL FAN PLATE Scope of delivery: ■ 1 fan plate ■ 8 milled edge screws torx T10 (M3 x 5) Description Part No. Additional fan plate incl. 1 set assembly material 12K737 *only bottom part (2/3 U) is perforated Description HP Part No. IEC IEEE Adaptation kit reduction, solid, without fan panel 84 15K053-6 15K060-6 15K053-7 15K060-7 Adaptation kit reduction, perforated*, without fan panel 15K054-6 15K061-6 15K054-7 15K061-7 Adaptation kit reduction, perforated*, with fan panel 15K055-6 15K062-6 15K055-7 15K062-7 Description 42 HP 63 HP 84 HP Flush front-mounting of double Eurocards 15K044-6 15K034-6 15K014-6 6 U 160 / 220 / 280 T 140 7 U 140 T IEC only 4 U 60 140 T 6 U T 140 3 U 60 80 T 3 U 160 / 220 / 280 T 140 6 U 160 / 220 / 280 T 140 7 U 140 T IEC only 4 U 60 140 T 6 U T 140 3 U 60 80 T 3 U 160 / 220 / 280 T 140

www.elma.com10|24 14|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET ADAPTATION KITS F Reduction kit 1/3 U + 2/3 U for 60 mm recessed mounting Range of application: ■ Recessed mounting of double eurocards with depth 160 to 220 mm ■ With or without individual front panels ■ Max. fan height 26 mm ■ Backplanes ■ Modules, cassettes, plug-in units ■ Drive mechanism receptacles 5 1/4'' Scope of delivery: ■ 2 internal extrusions ■ 2 longitudinal extrusions 66-1 1 1 (IEC) or 66-677 (IEEE) ■ 2 insulating strips (only -6 and IEEE, if -6 and IEC 4 strips needed) ■ 1 centre extrusion (only IEC) ■ 1 auxiliary cover top ■ 1 auxiliary cover bottom ■ 4 tapped strips M2.5 (6 pieces for IEC) ■ 1 set assembly material, torx Adaptation kits ADAPTATION KITS E Range of application: ■ Recessed mounting of double Eurocards, with depth 160 to 220 mm ■ Without individual front panels ■ Backplanes Scope of delivery: ■ 4 internal extrusions ■ 1 centre extrusion ■ 4 insulating strips ■ 4 tapped strips ■ 2 set assembly material, torx *only bottom part (2/3 U) is perforated Description HP Part No. IEC IEEE Adaptation kit reduction, solid, without fan panel 84 15K053-6 15K060-6 15K053-7 15K060-7 Adaptation kit reduction, perforated*, without fan panel 15K054-6 15K061-6 15K054-7 15K061-7 Adaptation kit reduction, perforated*, with fan panel 15K055-6 15K062-6 15K055-7 15K062-7 ADDITIONAL FAN PLATE Scope of delivery: ■ 1 fan plate ■ 8 milled edge screws torx T10 (M3 x 5) Description Part No. Additional fan plate incl. 1 set assembly material 12K737 Description 42 HP 63 HP 84 HP Recessed mounting of double Eurocards without front panels 15K045-6 15K035-6 15K015-6 6 U 160 / 220 / 280 T 140 7 U 140 T IEC only 4 U 60 140 T 6 U T 140 3 U 60 80 T 3 U 160 / 220 / 280 T 140 6 U 160 / 220 / 280 T 140 7 U 140 T IEC only 4 U 60 140 T 6 U T 140 3 U 60 80 T 3 U 160 / 220 / 280 T 140 6 U 160 / 220 / 280 T 140 7 U 140 T IEC only 4 U 60 140 T 6 U T 140 3 U 60 80 T 3 U 160 / 220 / 280 T 140

www.elma.com10|24 15|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Adaptation kits EDGE CONNECTOR EXTRUSION Scope of delivery: ■ 1 aluminum extrusion, clear passivated (conductive) Description Part No. Assembly material M2.5 (for 2 supplementary extrusions) 63-214 Length Part No. HP mm inch clear passivated (EMV version) raw 8 40.6 1.59 66-147-40 18 91.4 3.59 66-147-41 28 142.2 5.60 66-147-42 42 213.4 8.40 66-147-63 63 320.0 12.60 66-147-65 81 411.5 16.20 66-147-22 84 426.7 16.80 66-147-52 1350.0 53.14 66-147-19 ASSEMBLY MATERIAL Accessories WIDTH DIVISION FOR 6 U CONSTRUCTION Scope of delivery: ■ 1 divider extrusion front ■ 1 divider extrusion rear ■ 2 longitudinal extrusions ■ 2 internal extrusions ■ Assembly material: 16 cylinderhead screws torx T20 (M4 x 10) 4 cylinderhead screws torx T10 (M3 x 12) Nominal width Part No. 6 U (c) 2 x 3 U (a) IEC60297 IEEE1101.10

50 HP 32 HP 12K959-2 12K959-3

40 HP 42 HP 12K949-2 12K949-3

Scope of delivery Description Part No. 1 piece tapped strip M2.5 32 HP = 162.56 mm 61-463 1 piece tapped strip M2.5 42 HP = 213.36 mm 61-464 TAPPED STRIPS FOR FRONT EXTRUSIONS

www.elma.com10|24 16|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories EMC WIDE DIVISIONS SMALL ■ For dividing 6 U systems ■ Direct mounting onto the height extrusion and side panel ■ For width of 4 and 8 HP ■ Other sizes on request Scope of delivery: ■ 2 divider extrusions front ■ 2 divider extrusions rear ■ 2 tapped strips M2.5 ■ 8 cylinder head screws M4 x 10 ■ 4 slotted countersunk screws M4 x 10 ■ 2 set screws for fixing of tapped strips M2.5 x 8 ■ 2 card guides 160 mm (4 pieces for 8 HP version) Description Part No. d = 4 HP Part No. d = 8 HP Front sub division vertical small IEEE 80-504-11 80-508-11 Front sub division vertical small IEC 80-204-11 80-208-11 HORIZONTAL CARD MOUNTING KITS FOR DOUBLE EUROCARDS ■ For double Eurocards (6 U) ■ The horizontal card mounting kit can be fitted recessed by using two additional extrusions ■ If no overall fan plates is used, the top and bottom cover plate has to be ordered separately ■ Fan front panels, card guides and front panels see below Scope delivery: ■ 4 distance plates (2 front | 2 rear) ■ 4 longitudinal extrusions (2 front | 2 rear) ■ 1 centre extrusion ■ 6 tapped strips M2.5 ■ 1 set assembly material ■ Top and bottom cover plate has to be ordered separately Mounting height Usable height Backplane Cover plate top bottom

3 U 20 HP 14K971-60 21N602-90 21N602-90

4 U 28 HP 14K981-60 21N602-90 21N603-90

6 U 48 HP 14K991-60 21N606-90 21N607-90

Double eurocards = 52 HP 84 HP Triple eurocards = 78 HP 32 HP 6 HP

www.elma.com10|24 17|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories FAN FRONT PANELS FOR HORIZONTAL MOUNTING KITS ■ For horizontal mounting of double Eurocards ■ Aluminum 2.5 mm, clear anodised (non-conductive) ■ With cutout for power switch Scope of delivery: ■ 1 perforated fan front panel Height Width Air passage Part No. mm2 sq. in Without switch opening 3 U 63 HP 3195 4.95 21N363-07 With switch opening 3 U 62 HP 2662 4.12 21N363-02 Height Width Air passage Part No. mm2 sq. in Without switch opening 4 U 62 HP 4260 6.6 21N462-01 With switch opening 4 U 62 HP 3727 5.77 21N462-02 Height Width Air passage Part No. mm2 sq. in Without switch opening 4 HE 63 TE 4260 6.6 21N463-07 With switch opening 4 HE 63 TE 3727 5.77 21N463-02 FRONT PANEL SCREWS ■ Set of 10 screws ■ With treaded or press-fit bush ■ 8 screws are necessary per front panel Description Part No. Recessed round head screw, M2.5 x 11.3 with threaded bush M5 x 0.5 63-129 Recessed round head screw, M2.5 x 11.3 with press-fit bush Ø 3.7 63-444

www.elma.com10|24 18|31 17.85 20.85 15.850 3 29.3 35.3 für M4 □3.2/5.08 Montageseite Kartenführung DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories EMC HORIZONTAL CARD MOUNTING KIT FOR DOUBLE EUROCARDS (6 U) ■ For 160 mm card depth ■ For backplane mounting with insulating strips ■ Fan slot on the right side of the horizontal installation kit Lieferumfang: ■ 1 connector plate ■ 2 + 14 card guides ■ 2 cover plates ■ 2 endplates ■ 2 longitudinal extrusions ■ 2 internal extrusions ■ 4 insulating strips ■ 1 fan plate without fan ■ 4 tapped strips M2.5 ■ 1 set of assembly material ■ 1 set of EMC gaskets ■ 14 ESD clips and 14 ESD springs (IEEE version only) *This space is necessary for the air flow. Assemble blind panel or monitoring module Height Nominal height Part No. IEEE IEC

4 U 28 HP 14K987-60 14K986-60

EMC FRONT SUB DIVISION HORIZONTAL IEC FOR CARD GUIDES ■ For sub division of front and rear ■ Card guides can be applied on one side ■ EMC level: Superior ■ Only one special extrusion needed ■ Easy and quick assembly ■ Cost effective solution ■ Delivered as a kit ■ Usable width: 84 HP ■ Other sizes on request Scope of delivery: ■ 1 front double extrusion IEC-special, clear passivated ■ 2 tapped strips M2.5 ■ 4 cylinder head screws torx T0 (M4 x 10) Description Part No. EMC front sub division horizontal IEC for card guides 63K837-24

4 HP* 60 HP

www.elma.com10|24 19|31 15.85 17.85 20.85 14.8 20.8 For M4 17.85 20.85 15.850 3 29.3 35.3 für M4 □3.2/5.08 Montageseite Kartenführung DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories EMC FRONT SUB DIVISION EMC FRONT SUB DIVISION HORIZONTAL IEC ■ For sub division of front and rear ■ No possibility of mounting card guides ■ EMC level: Superior ■ Only one special extrusion needed ■ Easy and quick assembly ■ Cost effective solution ■ Delivered as a kit ■ Usable width: 84 HP ■ Other sizes on request Scope of delivery: ■ 1 front double extrusion IEC-special, clear passivated ■ 2 tapped strips M2.5 ■ 4 torx cylinder head screws M4 x 10 (T20) Description Part No. EMC front sub division horizontal IEC 63K837-22 EMC FRONT SUB DIVISION HORIZONTAL IEEE FOR CARD GUIDES ■ EMC level: Superior ■ Only one special extrusion needed ■ Card guides can be applied ■ Easy and quick assembly ■ Cost effective solution ■ Usable width: 84 HP ■ Other sizes on request Scope of delivery: ■ 1 front double extrusion IEEE-special clear passivated ■ 2 tapped strips M2.5 ■ 4 cylinder head screws torx T20 (M4 x 10) Description Part No. EMC front sub division horizontal IEC for card guides 63K837-23 Card guide mounting side for M4 for M4

www.elma.com10|24 20|31 A 10 14 Doppelseitiges Klebeband 0.8 4.1 0.08 DoppelseitigesKlebeband 0.8 4.1 0.082 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories EMC FRONT SUB DIVISION HF SPRING ■ Stainless steel ■ Snapped-in on the extrusion Scope of delivery: ■ 2 HF spring 84 HP Description Part No. 1 set of 2 HF spring 84 HP 7739-14-4 EMC CONTACT STRIPS ■ BeCu galvanized ■ For front panels, fixing on extrusion ■ Self-adhesive Scope of delivery: ■ 2 EMC contact strips Width Length Part No. mm inch 84 HP 424.2 16.7 63-836-70 MOUNTING CHASSIS FULL DEPTH ■ For mounting non-standard modules and components ■ Mounting chassis is fixed directly on the side panels ■ Aluminum 2 mm, raw Scope of delivery: ■ 1 mounting chassis (depth: < 230 mm can be mounted with 4 screws | > 230 mm with 6 screws) Case depth Chassis depth A Part No. mm inch mm inch 42 HP 63 HP 84 HP 245 9.64 168 6.61 14M028 14M029 14M030 305 12 228 8.97 14M031 14M032 14M033 395 15.55 318 12.52 - 14M034 14M035 500 19.68 428 16.65 - - 14M036 Scope of delivery for assembly material: ■ 4 cylinder head screw torx T20 (M4 x 6) ■ 4 earthing nut M4 Description Part No. Assembly material for mounting chassis 63K861 Mounting through holes for positioning in 50 mm grid increments Double sided tape

www.elma.com10|24 21|31 D A 8 16 4.1 D A 140 8 16 100 4.1 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Description Part No. Assembly material for mounting chassis with torx-screws 63K861 Description Part No. Assembly material for mounting chassis with torx-screws 63K861 Accessories MOUNTING CHASSIS FOR MOUNTING OF POWER SUPPLIES, ETC. CHASSIS DEPTH 80 MM Scope of delivery for assembly material: ■ 4 cylinder head screw torx T20 (M4 x 6) ■ 4 earthing nut M4 Scope of delivery for assembly material: ■ 4 cylinder head screw torx T20 (M4 x 6) ■ 4 earthing nut M4 CHASSIS DEPTH 140 MM Case Width A D Part No. mm inch mm inch 42 HP 218.2 8.59 1.5 0.06 14-833 63 HP 324.9 12.79 1.5 0.06 14-834 84 HP 431.5 16.98 2 0.08 14-836 Case Width A D Part No. mm inch mm inch 84 HP 431.5 16.98 2 0.08 14-832

www.elma.com10|24 22|31 431.5 15 15 119.7 200 2 27.8 4.4 11.9 4.1 4.3 8 16 150 4.1 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories MOUNTING CHASSIS FOR HORIZONTAL MOUNTING OF EUROCARDS CHASSIS DEPTH 200 MM ■ The hole pattern allows single, double and triple Eurocards to be mounted Case width Part No.

84 HP 14-840

Description Part No. Assembly material for mounting chassis with torx-screws 63K861 ASSEMBLY MATERIAL Scope of delivery: ■ 4 cylinder head screw torx T20 (M4 x 6) ■ 4 earthing nut M4 MOUNTING SET FOR ONE EUROCARD Scope of delivery: ■ 2 front extrusions ■ 2 internal extrusions ■ Card guides (2 to 6 pieces) ■ 2 tapped strips ■ Assembly material Extrusion length Part No.

4.5 HP IEC 80-204-11

8.5 HP IEC 80-208-11

12.5 HP IEC 80-212-11

4.5 HP IEEE 80-504-11

8.5 HP IEEE 80-508-11

GASKETS FOR ADVANCED EMC LEVEL ■ Vertical gaskets for cover plates (partial) ■ To achive an advanced EMC level ■ No additional gaskets for width necessary Depth gaskets for covers: Case depth Scope of delivery Part No. mm inch 245 9.64 4 self-adhesive HF gaskets L = 30 mm 63-836-07 305 12.00 4 self-adhesive HF gaskets L = 30 mm 63-836-07 395 15.55 8 self-adhesive HF gaskets L = 30 mm 63-836-08 500 19.68 12 self-adhesive HF gaskets L = 30 mm 63-836-09

www.elma.com10|24 23|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories EMC SHIELDING GASKETS FOR SUPERIOR EMC LEVEL ■ Vertical and horizontal gaskets for cover plates ■ To achive superior EMC level ■ Order 1 set each for width and depth Width gaskets for covers: EMC DESIGN FRONT PANEL ■ For front panels, pushing on side panel ■ For additional increase of EMC to advanced level ■ Aluminium, clear passivated Scope of delivery: ■ 2 EMC front extrusion ■ 2 EMC springs ■ Assembly material (2 screws torx T8, adhesive foil) EMC CONTACT STRIPS (ADVANCED EMC LEVEL) ■ For front panels, fixing on extrusion ■ Self-adhesive Scope of delivery: ■ 2 contact strips Width Scope of delivery Part No. 42 HP 4 self-adhesive HF gaskets L = 216.5 mm 63-836-20

63 HP 4 self-adhesive HF gaskets L = 323 mm 63-836-21

84 HP 4 self-adhesive HF gaskets L = 430 mm 63-836-23

Depth Scope of delivery Part No. mm inch 245 9.64 4 self-adhesive HF gaskets L = 195 mm 63-836-10 305 12.00 4 self-adhesive HF gaskets L = 255 mm 63-836-11 395 15.55 4 self-adhesive HF gaskets L = 345 mm 63K836-04 500 19.68 4 self-adhesive HF gaskets L = 445 mm 63K836-05 Depth gaskets for covers: Width Length Part No. 42 HP 212.1 mm 63-836-67 63 HP 318.1 mm 63-836-68 84 HP 424.2 mm 63-836-70 Case height Part No.

2 U 7820-93

3 U 7820-94

4 U 7820-90

6 U 7820-102

www.elma.com10|24 24|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories FRONT PANELS FLAT FRONT PANELS ■ For subracks and enclosures, solid ■ Aluminum 2.5 mm, clear anodised (non-conductive) ■ 1 HP and 2 HP are divider extrusions (not flat panels) Scope of delivery: ■ 1 flat front panel Flat front panels for subracks and enclosures, solid: Width HP B Height Part No. mm inch 1 U 39.8 mm ca. 1 U* 42.15 mm 2 U 84.2 mm 3 U 128.7 mm 4 U 173.1 mm 6 U 262 mm 2 10.0 0.39 — — — 21N302 — 21N602 3 15.2 0.59 — — — 21N303 21N403 21N603 4 20.1 0.79 — — — 21N304 21N404 21N604 5 25.2 0.99 — — — 21N305 21N405 21N605 6 30.3 1.19 — — — 21N306 21N406 21N606 7 35.3 1.38 — — — 21N307 21N407 21N607 8 40.4 1.59 — — — 21N308 21N408 21N608 10 50.6 1.99 — — — 21N310 21N410 21N610 11 55.7 2.19 — — — 21N311 — — 12 60.7 2.38 — — — 21N312 21N412 21N612 14 70.9 2.79 — — — 21N314 21N414 21N614 16 81.1 3.19 — — — 21N316 21N416 21N616 20 101.4 3.59 — — — 21N320 21N420 21N620 21 106.5 4.19 — — — 21N321 21N421 21N621 28 142.0 5.59 — — — 21N328 — 21N628 32 162.3 6.38 — — — 21N332 21N432 — 42 213.1 8.38 — — 21N242 21N342 21N442 21N642 52 263.9 10.38 — — — 21N352 21N452 21N652 63 319.8 12.59 — — 21N263 21N363 21N463 21N663 81 411.3 16.19 — — 21N281 21N381 21N481 21N681 84 426.5 16.79 21N184 21N084* 21N284 21N384 21N484 21N684 * Coverplates for 1 U fan opening Front panel screws: ■ Set of 10 screws, M2.5 x 1 1.3, with screw retainer Description Part No. (10 pieces) Screws torx M2.5 x 11.3, with plastic screw retainer 63K159 Milled edge screws recessed M2.5 x 11.3, with plastic screw retainer 63-159

www.elma.com10|24 25|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories EMC FRONT PANELS EMC FILLER PANELS WITH EMC GASKET ■ High stability (U-profile) ■ Extruded aluminum ■ Pressed-in centring pin and bushes M2.5 ■ Front side clear anodised | rear side conductive Scope of delivery: ■ 1 EMC front panel incl. pressed-in centering pin and bushes M2.5 (pressed-in) EMC front panels: Width Part No.

3 U 4 U 6 U

4 HP 66-514-73 66-514-74 66-514-76

5 HP 66-515-73 66-515-76

6 HP 66-516-73 66-516-74 66-516-76

8 HP 66-518-73 66-518-74 66-518-76

9 HP 66-519-73 66-519-76

10 HP 66-520-73 66-520-76

12 HP 66-522-73 66-522-74 66-522-76

14 HP 66-534-73 66-534-76

Height Part No. 1 piece 10 pieces 100 pieces

3 U 81-062-03 81-062-03-1 81-062-03-2

4 U 81-062-04 81-062-04-1 81-062-04-2

6 U 81-062-06 81-062-06-1 81-062-06-2

EMC gasket (stainless steel): Description Part No. Screw torx T8 (M2.5 x 11.3) 5443-08 Round head screw, cross recessed M2.5 x 12.7 61-287 Front panel screws: ■ Front panel width < 9 HP = 2 screws ≥ 10 HP = 4 screws EMC FRONT PANELS EMC FILLER PANELS WITHOUT EMC GASKET ■ Front panel standard, solid ■ Front clear anodised | rear conductive ■ Basic EMC level Scope of delivery: ■ 1 front panel incl. press-fit bushes M2.5 (pressed-in) EMC filler panels without gasket: Width Part No. HP 3 U 4 U 6 U 4 21B304 10 21B310 12 21B312 16 21B316 21B416 21 21B321 21B421 21B621 42 21B342 21B442 21B642 63 21B363 21B463 84 21B384 21B484 21B684 Description Part No. Screw torx T8 (M2.5 x 11.3) 5443-08 Round head screw, cross recessed M2.5 x 12.7 61-287 Front panel screws: ■ Front panel width < 9 HP = 2 screws ≥ 10 HP = 4 screws

www.elma.com10|24 26|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories EMC DESIGN FRONT PANEL ■ Aluminum 2.5 mm (conductive) ■ Front panel without visible screws ■ Closes the front and rear side of the chassis with big shielding effect ■ Contact between flat front panel and chassis is made with an EMC gasket Scope of delivery: ■ 1 EMC design front panel ■ 2 plate slider ■ 2 holder ■ 2 locking device ■ 2 filister head screw M2.5 x 40 Width Part No.

2 U 3 U 4 U 6 U

42 HP 24B242 24B342 24B442 24B642

63 Hp 24B263 24B363 24B463 24B663

84 HP 24B284 24B384 24B484 24B684

EMC FLAT FRONT PANELS SUPERIOR EMC LEVEL Scope of delivery: ■ 1 EMC flat front panel ■ Contact angle, incl. screws ■ EMC gasket for contact angle, front extrusion, front panel Front panel screws: ■ Front panel width 42 HP = 4 screws ■ Front panel width 63 HP = 6 screws ■ Front panel width 84 HP = 8 screws Description Part No. 10 pieces Torx screws M2.5 x 11.3 size T8 with press-fit bush 63K480 Screw recessed M2.5 x 11.3 with press-fit bush 63-444 Screw cross recessed M2.5 x 12.7 with press-fit bush 63-480 Width Part No.

42 HP 21D242 21D304

63 HP 21D263 21D310 21D463

84 Hp 21D284 21D384 21D484 21D684

Configuration closing device EMC gasket (front extrusion / front panel) Contact angle with conductive tape EMC gasket full height (side / front panel)

www.elma.com10|24 27|31 39.65 426.4 84.1 426.4 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories PERFORATED EMC FRONT PANEL ■ Front anodised, rear conductive ■ Advanced EMC level ■ Width: 84 HP Scope of delivery: ■ Perforated flat front panel Height Air passage Part No. with switch opening without switch opening 1 U 39.65 mm 1.56'' 4’100 mm2 21C184-01 2 U 84.1 mm 3.31'' 12’300 | 11’700 mm2 21C284-01 21C284-02 Front panel screws: Description Part No. 10 pieces Screws torx T8 (M2.5 x 11.3) with press-fit bush 63K480 Screws recessed M2.5 x 11.3 with press-fit bush 63-444 Screws cross recessed M2.5 x 12.7 with press-fit bush 63-480 Description Part No. 10 pieces Screws torx (M2.5 x 11.3) with plastic screw retainer 63K159 Milled edge screws recessed M2.5 x 11.3, with screw retainer 63-159 Description Height Air passage Part No. mm2 sq. inch Without switch opening ~ 1 U 8664 13.42 21N084-01 With switch opening ~ 1 U 8664 13.42 21N084-02 Without switch opening 2 U 17328 26.85 21N284-01 With switch opening 2 U 17328 26.85 21N284-02 Front panel screws: ■ Set of 10 screws, M2.5 x 1 1.3 ■ With screw retainer ■ Fan front panel ~1 U = 4 screws

2 U = 6 screws

FAN FRONT PANELS 84 HP FOR VERTICAL VENTILATION ■ Fan front panel: Perforated and designed with optimum air flow rate ■ Available with or without switch cut-out (switch opening 22 x 30.6 mm) ■ Aluminum 2.5 mm, clear anodised (non-conductive) Scope of delivery: ■ 1 perforated fan front panel Switch opening Switch opening Switch opening 1 U

2 U1 U2 U

84 HP 84 HP

www.elma.com10|24 28|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories FAN FRONT PANELS FAN FRONT PANELS FOR HORIZONTAL VENTILATION ■ Aluminum 2.5 mm, clear anodised (non-conductive) Scope of delivery: ■ 1 perforated fan front panel Description Height Width Air passage Part No. mm2 sq. inch Without switch opening 3 U 20 HP 4051 6.27 21N320-04 4 U 24 HP 7022 10.88 21N424-03 Description Part No. 10 pieces Screws torx (M2.5 x 11.3) with plastic screw retainer 63K159 Milled edge screws recessed M2.5 x 11.3, with screw retainer 63-159 FAN FRONT PANELS FOR DIRECT FAN MOUNTING ■ Aluminum 2.5 mm, clear anodised (non-conductive) Scope of delivery: ■ 1 perforated fan front panel Height Width Air passage Part No. 1 piecemm2 sq. inch 3 U 8 HP 3'195 4.95 21N308-01 12 HP 4'793 7.42 21N312-01 4 U 8 HP 4'260 6.6 21N408-01 12 HP 6'390 9.9 21N412-01 16 HP 8'520 13.2 21N416-01 6 U 8 6'390 9.9 21N608-01 12 HP 9'586 14.85 21N612-01 Front panel screws: ■ Set of 10 screws, M2.5 x 1 1.3 ■ With screw retainer ■ Fan front panel width up to 8 HP = 2 screws | ≥ 12 TE = 4 screws All oblong holes 35 x 8 3 U 3 U 4 U 4 U 4 U 6 U

8 HP 12 HP 8 HP

12 HP 16 HP 16 HP

www.elma.com10|24 29|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Description Part No. 10 pieces Screws torx (M2.5 x 11.3) with plastic screw retainer 63K159 Milled edge screws recessed M2.5 x 11.3 with plastic screw retainer 63-159 Description Part No. 10 pieces Countersunk screw, recessed M4 x 10 5342-10 Hexagonal nut M4, 0.8D 5620-51 Accessories FAN FRONT PANELS FAN FRONT PANELS FOR DIRECT FAN MOUNTING Front panel screws: ■ Set of 10 screws, M2.5 x 1 1.3 ■ With screw retainer HINGED FRONT PANELS ■ Hinges are attached to the front extrusions of the subrack or case ■ Aluminum 2.5 mm, clear anodised (non-conductive) Scope of delivery: ■ 1 Front panel ■ Hinge extrusion ■ Assembly material M2.5, incl. hinges Width Part No.

63 HP 25N363-19 25N463-19

84 HP 25N384-19 25N484-19 25N684-19

63 HP 320.04 12.60 319.8 12.59 84 HP 426.72 16.80 426.5 16.79 Nominal height Height H Height h mm inch mm inch 3 U 128.7 5.07 117 4.61 4 U 173.15 6.81 161.4 6.35 6 U 262.05 10.31 250.3 9.85 Dimensions: Assembly material for fan mounting:

www.elma.com10|24 30|31 DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Accessories BOTTOM-HINGED FRONT PANELS EMC TOP / BOTTOM-HINGED FRONT PANELS ■ Width: 84 HP ■ Optimum protection from electromagnetic interference ■ Aluminum 2.5 mm ■ Front anodised | rear conductive Scope of delivery: ■ 1 EMC front panel ■ Hinge extrusions ■ Assembly material M2.5, incl. hinges ■ EMC gaskets EMC-Level Part No. Advanced 25C384-11 25C484-11 25C684-11 Superior 25D384-11 25D484-11 25D684-11 SIDE-HINGED FRONT PANELS ■ Aluminum 2.5 mm, clear anodised (non-conductive) Scope of delivery: ■ 1 front panel ■ Hinge extrusion ■ Assembly material M2.5, incl. hinges Width HP Part No. 84 25N384-29 25N484-29 25N684-29 Nominal height Height H U mm inch 3 128.7 5.06 4 173.15 6.81 6 262.05 10.31 Nominal Width Width B Width b HP mm inch mm inch mm inch Dimensions:

www.elma.com 31|3105|21 128.7 (für 3 HE) Ø 2.7 (6x) 212.66 (für 42 TE) (25) (21.2) 27 x 1.5 TE (= 205.74) (R 0.5) (4.37) Detail 1 Detail 1 2:1 Detail 1 2:1 ©Copyright 2018 by Elma Electronic AG, CH-8620 Wetzikon. Subject to technical modifications, all data supplied without liability. DESIGN AND COMPACT CASE STYLEBOX 15 E-MOTION DATASHEET Please contact our sales team for more details. China: +86 21 5866 5908 France: +33 388 56 72 50 Germany: +49 7231 97 34 0 Israel: +972 3 930 50 25 Singapore: +65 6479 8552 Switzerland: +41 44 933 41 1 1 United Kingdom: +44 1234 838 822 United States: +1 510 656 3400 Accessories HEAT SINK FRONT PANELS ■ For subracks and enclosures ■ Width 42 HP ■ Cooling fins in pitch of 11/2 HP ■ Aluminum anodised or clear passivated ■ EMC version with mounted brackets for slide in of EMC gaskets 81-062-xx ■ Customised versions on request Scope of delivery: ■ 1 heat sink front panel M2.5 incl. hinges Description Surface Width Height Part No. Heat sink front panel clear anodised 42 HP 3 U 66-100-71 Heat sink front panel black anodised 42 HP 3 U 66-100-72 EMC heat sink front panel clear passivated 42 HP 3 U 21F342 Description Part No. (1 piece) Cylinder head screw torx T8 (M2.5 x 10) 5470-09 Cross recessed cylinder head screw M2.5 x 10 5325-10 Assembly Material: EMC GASKET Scope of delivery: ■ Stainless steel Height Length Part No. 1 piecemm inch 3 U 101.6 4 81-062-03 Drawing heat sink front panel 66-100-71: Further general accessories can be found in the brochure ''General accessories'' or on request. 128.7 (for 3 U) Ø 2.7 (6x) 212.66 (for 42 HP) (25) (21.2) 27 x 1.5 HP (= 205.74) (R 0.5) (4.37) Detail 1 Detail 1 2:1Detail 1(22.51) 76.2 (15 HP) 76.2 (15 HP) 128.7 (for 3 U) Ø 2.7 (6x) 212.66 (for 42 HP) (25) (21.2) 27 x 1.5 HP (= 205.74) (R 0.5) (4.37) Detail 1 Detail 1 2:1