15PV MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MODEL: 15PV 15PV SPECIFICATIONS ES-0620 Rev.11 Page 1/2 http://www.m-system.co.jp/ Dual Channel Input/Output Isolators 15-RACK P/I TRANSDUCER Functions & Features
- Converting a standard pneumatic signal into a proportional DC output
- 2 channels available; accomplishing economical and space-saving multi-input processing MODEL: 15PV–[1]6–R[2]
ORDERING INFORMATION
- Code number: 15PV-[1]6-R[2] Specify a code from below for each [1] and [2]. (e.g. 15PV-26-R/A2S/Q)
- Specify the specification for option code /Q (e.g. /C01) [1] PNEUMATIC CONNECTION 2: Rc 1/4" 5: Rc 1/8" fitting 7: 1/4" NPT fitting OUTPUT Voltage 6: 1 – 5 V DC (Load resistance 5000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [2] OPTIONS (multiple selections) Pressure Range blank: 0.2 - 1.0kgf/cm2 /A1S: 19.6 – 98.1 kPa /A2S: 20 – 100 kPa /A3S: 20.7 – 103.4 kPa /A2: 0.2 – 1.0 bar /A3: 3 – 15 psig Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating
RELATED PRODUCTS
- EXTENDER CARD (model:10EC) Necessary to adjust span. GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear Connection Output: Card-edge connector Pneumatic: Rc 1/4", Rc 1/8" or 1/4" NPT female (torque ≤ 12 N·m) Power input: Suplied from card edge connector Materials Housing: flame-resistant resin (black) Base: Die cast aluminium Overrange output: Approx. -10 to +120 % Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (top) INPUT SPECIFICATIONS ■ Input 19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm2 20 – 100 kPa, 0.2 – 1.0 bar 20.7 – 103.4 kPa, 3 – 15 psig INSTALLATION Current consumption: Approx. 30 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 15BX Weight: 190 g (0.42 lb)
MODEL: 15PV 15PV SPECIFICATIONS ES-0620 Rev.11 Page 2/2 http://www.m-system.co.jp/ PERFORMANCE in percentage of span Accuracy: ±0.2 % Temp. coefficient: ±0.03 %/°C (±0.02 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Permissible overrange: 196 kPa (2.0 kgf/cm2, 1.96 bar, 28 psig) Line voltage effect: ±0.1 % over voltage range Dielectric strength: 1500 V AC @ 1 minute (Output or power to ground) DIMENSIONS unit: mm (inch) 91 (3.58) 99 (3.90 ) 3 (.12) 82 (3.23) 2–4.3 (.17) dia. MTG HOLE SUPPLY CONNECTION Rc 1/4”, Rc 1/8” or 1/4” NPT 20 (.79) approx. 27 (1.06)* [13 (.51)] ** FITTING * [ ] for Rc 1/8". ** Fitting provided for Rc 1/8" or 1/4" NPT connection. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Output Driver CONNECTOR POWER Ch.2 OUTPUT Ch.1 OUTPUT Low Drift Amplifier Semiconductor Pressure Sensor SZ Ch.1 INPUT Ch.2 INPUT Output Driver Low Drift Amplifier Semiconductor Pressure Sensor SZ Specifications are subject to change without notice.