15KP UNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Features
Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
Description
Uni-directional Bi-directional
Applications
Revision March 1,2022 Axial Lead Transient Voltage Suppressors (TVS) www.unsemi.com.tw
17 To 280V 15000W
www.unsemi.com.tw Cathode Bi-directional Anode Uni-direction For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/5 Functional Diagram 15000 See Next Table 8.0 500 -55 to +150 -40 to +125 PPPM IPP PM(AV) IFSM TJ ,TSTG TOP Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note 1), (Note 2) Peak Pulse Current with a 10/1000µs waveform.(Note 1,Fig.3) Power dissipation on infinite heatsink at TL = 75℃ Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Junction and Storage Temperature Range Operating Temperature Range W A W A Parameter Symbol Value Unit Maximum Ratings (TA =25℃ unless otherwise noted)
Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Electrical Characteristics (TA =25℃ unless otherwise noted) Part Number Uni Bi Reverse Stand-Off Voltage VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX 15KP17A 15KP18A 15KP20A 15KP22A 15KP24A 15KP26A 15KP28A 15KP30A 15KP33A 15KP36A 15KP40A 15KP43A 15KP45A 15KP48A 15KP51A 15KP54A 15KP58A 15KP60A 15KP64A 15KP70A 15KP75A 15KP78A 15KP85A 15KP90A 15KP100A 15KP110A 15KP120A 15KP130A 15KP150A 15KP160A 15KP170A 15KP180A 15KP200A 15KP220A 15KP240A 15KP260A 15KP280A 15KP17CA 15KP18CA 15KP20CA 15KP22CA 15KP24CA 15KP26CA 15KP28CA 15KP30CA 15KP33CA 15KP36CA 15KP40CA 15KP43CA 15KP45CA 15KP48CA 15KP51CA 15KP54CA 15KP58CA 15KP60CA 15KP64CA 15KP70CA 15KP75CA 15KP78CA 15KP85CA 15KP90CA 15KP100CA 15KP110CA 15KP120CA 15KP130CA 15KP150CA 15KP160CA 15KP170CA 15KP180CA 15KP200CA 15KP220CA 15KP240CA 15KP260CA 15KP280CA 100 110 120 130 150 160 170 180 200 220 240 260 280 18.99 20.11 22.34 24.57 26.81 29.04 31.28 33.51 36.90 40.20 44.70 48.00 50.30 53.60 57.00 60.30 64.80 67.00 71.50 78.20 83.80 87.10 94.90 100.50 111.70 122.90 134.00 145.20 167.60 178.70 189.90 201.10 223.40 245.70 268.10 290.40 312.80 20.79 22.01 24.46 26.91 29.35 31.80 34.24 36.70 40.40 44.00 48.90 52.60 55.00 58.70 62.40 66.00 70.90 73.40 78.30 85.60 91.70 95.40 104.00 110.10 122.30 134.50 146.80 159.00 183.50 195.70 207.90 220.10 244.60 269.10 293.50 318.00 342.40 29.3 30.9 34.3 37.1 40.7 44.0 47.5 50.7 54.7 59.8 65.8 69.8 72.8 77.7 82.9 87.7 93.8 97.4 104.2 113.6 122.0 126.1 137.6 145.6 161.3 178.6 192.3 208.3 241.9 258.6 272.7 288.5 319.1 428.6 384.6 416.7 454.5 515.4 488.7 440.2 407.0 371.0 343.2 317.9 297.8 276.1 252.5 229.5 216.3 207.4 194.3 182.1 172.2 161.0 155.0 144.9 132.9 123.8 119.7 109.7 103.7 93.6 84.5 78.5 72.5 62.4 58.4 55.4 52.3 47.3 42.2 39.3 36.2 33.2 5000 5000 1500 500 150 Note: 1. For Bi-Directional devices having VR of 30 volts and under, the IR limit is double 15KP Series
Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.3/5 15KP Series Ratings and Characteristic Curves (TA =25℃ unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Surge Current Number of Cycles at 60Hz PPPM - Peak Pulse Power (kW) 0.1 100 1000 0.1 10 100 1000 VBR-Reverse Breakdown Voltage (V) 0 50 100 150 CJ – Junction Capacitance (pF) 100 1000 10000 100000 Tj=25°C f=1.0MHz Vsig=50mVp-p Uni-directional @VRWM Bi-directional @zero bins Bi-directional @VRWM 0 25 50 75 100 125 150 175 200 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 TL - Lead Temperature(°C) PM(AV), Steady State Power Dissipation (W) 1 10 100 200 250 300 350 400 450 500 IFSM-Peak Forward Surge Current (A) TJ=TJ max. 8.3 ms Single Half Sine-Wave Uni-directional @zero bins 200 250 300 350 TD - Pulse Width (μs) t - Time (ms) 10/1000µsec. Waveform as defined by R.E.A Half Value IPPM (IPPM/2) Peak Value IPPM tr=10µsec TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 0 1.0 2.0 3.0 4.0 100 150 IPPM - Peak Pulse Current, % IR SM TA-Ambient temperature(°C) 0 25 50 75 100 125 150 175 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage %
Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 15KP Series Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/second max 3°C/second max 217°C 60 -150 Seconds 260 +0/-5°C 20 -40 Seconds 6°C/second max 8 minutes Max 280°C Reflow Condition Pre Heat -Temperature Min (Ts(min) -Temperature Max (Ts(max) - Time (min to max) (ts) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (ts) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (tp) Ramp-down Rate TimeTime to peak temperature ( T25℃ to peak) Preheat Ts(min) Ts(max) TL TL TP Temperature Ramp-up Ramp-down Critical Zone TL toTP TP Ts Physical Specifications Environmental Specifications Weight Case Polarlty Terminal Color band denotes cathode except Bipolar JESD22-A104 JESD22-A102 JESD22-A103 JESD22-A108 JESD22-A106 Temperature Cycle Pressure Cooker High Temp. Storage HTRB Thermal Shock 0.07 ounce, 2.1 gram JEDEC R6/P600 Molded Plasticover glass passivated junction Matte Tin-plated leads, Solderable per JESD22-B102D V VC VBR VR IR VFIT IPP Uni-directional VVC VBR VR VCVBRVR IR IR IT IT IPP IPP Bi-directional
Axial Lead Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.5/5 15KP Series
Ordering Information
Packaging Dimensions Unit: Inches (Millimeters) K P C A 0.40±0.020 (10.16±0.508) xxx15 R6/P600 2.56 (65.00) 0.25 (6.35) 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VRWM VOLTAGE SERIES Part Number Component Package Quantity Packaging Option 15KPXXXXX R6/P600 200 BOX Dimensions A B C D Min Max MaxMin Inches Millimeters 1.000 0.340 0.048 0.340 0.360 0.052 0.360 25.40 8.64 1.22 8.64 9.14 1.32 9.14
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.