1.5KE_SERIES_14 PANJIT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

PAGE . 1November 15,2012-REV.04 1.5KE SERIES NOTES: 1. Non-repetitive current pulse, per Fig. 3 and derated above T A=25°C per Fig. 2. 2. Mounted on Copper Leaf area of 0.79 in 2(20mm2). 3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. 4. A transient suppressor is selected according to the working peak reverse voltage (V RWM), which should be equal to or greater than the DC or continuous peak operating voltage level.

FEATURES

 Plastic package has Underwriters Laboratory Flammability Classification 94V-O  Glass passivated chip junction in DO-201AE package  1500W surge capability at 1.0ms  Excellent clamping capability  Low zener impedance  Fast response time: typically less than 1.0 ps from 0 volts to BV min  High temperature soldering guaranteed: 260°C/10 seconds/.375" ,(9.5mm) lead length/5lbs., (2.3kg) tension  Lead free in comply with EU RoHS 2002/95/EC directives MECHANICAL DATA  Case: JEDEC DO-201AE molded plastic  Terminals: Axial leads, solderable per MIL-STD-750, Method 2026  Polarity: Color band denotes cathode end  Mounting Position: Any  Weight: 0.045 ounce, 1.2 gram MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types 1.5KE6.8 thru types 1.5KE440. Electrical characteristics apply in both directions. Recongnized File # E210467 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watts BREAK DOWN VOLTAGE 6.8 to 440 Volts Rating Symbol Value Units Peak Power Dissipation at T A=25OC, T P=1ms (Notes 1) P PP 1500 Watts Typical Thermal Resistance Junction to Air Lead Lengths .375", (9.5mm) (Notes 2) R θJA 30 OC / W Peak Pulse Current on 10/1000μs waveform (Notes 1) I PPM see T able Amps Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JECED Method) (Notes 3) I FSM 200 Amps Operating Junction and Storage T emperature Range T J,TSTG -65 to +175 OC 1.0(25.4)MIN. 0.042(1.07) 0.037(0.94) 0.285(7.2) 0.210(5.3) 0.188(4.8)

PAGE . 2November 15,2012-REV.04 1.5KE SERIES Part Number Reverse Stand-off Voltage Breakdown Voltage T est Current Reverse Leakage Max. Clamp Voltage 10/1000μs Peak Pulse Current 10/1000μs Marking Code VRWM (Notes 4) VBR @ IT IT IR @ VRWM VC @ IPP IPP Min. Max. UNI BI UNI BI V V V mA μA μA V A UNI BI 1500W Transient Voltage Suppressor

PAGE . 3November 15,2012-REV.04 1.5KE SERIES Part Number Reverse Stand-off Voltage Breakdown Voltage T est Current Reverse Leakage Max. Clamp Voltage 10/1000μs Peak Pulse Current 10/1000μs Marking Code VRWM (Notes 4) VBR @ I T IT IR @ VRWM VC @ IPP IPP Min. Max. UNI BI UNI BI V V V mA μA μA V A UNI BI 1500W Transient Voltage Suppressor 1.5KE130 1.5KE130C 105 117 143 1 1 1 187 8 1.5KE130 1.5KE130C 1.5KE150 1.5KE150C 121 135 165 1 1 1 215 7 1.5KE150 1.5KE150C

PAGE . 4November 15,2012-REV.04 1.5KE SERIES Fig.1 PEAK PULSE POWER RATING VERSUS PULSE TIME CURVE Fig.2 PULSE DERATING CURVE Fig.3 PULSE WAVEFORM Fig.5 MAXIMUN NON-REPETITEVE PEAK FORWARD SURGE CURRENT UNIDIRECTIONAL Fig.4 TYPICAL JUNCTION CAPACITANCE td,PULSE WIDTH,usec T,TIME,ms V(BR) , BREAKDOWN VOLTAGE, VOLTS T ,AMBIENT TEMPERATURE, CA O 0.1 0.1 1.0 1.0 100 100 1000 10000P ,PEAK PULSE FORWARD,KW PPM I ,PEAK PULSE CURRENT,%PPM PEAK PULSE FORWARD (P ) OR CURRENT (I ) DERATING IN PERCENTAGE % PP PP 100 125 150 175 20025 50 75 1000 Non-Repetitve Pulse Wavefom Shown in Figure.3 T= 2 5 C A O 0 1.0 2.0 3.0 4.0 100 150 TA =2 5C P ulse Width (td) is D efined as t he P oint W here the P eak C u r r e n tD e cay st o5 0 %o fI p p tf= 10 use c 10/1000 use c Wa ve fo rm as D efined bye R .E .A . Pe a k Va l u e Ip p m Ha lf Va lue -Ip p e-kt td 1,000 100 5.0 10 20 50 100 200 500 Tj = 2 5 C f= 1.0MHZ Vsig = 50m Vp -p Measured a t Ze ro Bia s Measured a t Stand-Off Vo l t a g e (V ) RWMCJ,CAP ACIT ANCE ,pF Tj = Tj m a x 8.3ms S INGL E HAL F since-W AVE JEDEC MET HOD I , PEAK FO RWARD SURG E CURRENT AMPERES FSM 100 200 5 50 100 UNIDIRECT IONAL ONL Y NUM BER OF CYC LES AT 60 Hz

PAGE . 5November 15,2012-REV.04 1.5KE SERIES Part No_packing code_Version 1.5KE6.8_AY_00001 1.5KE6.8_AY_10001 1.5KE6.8_B0_00001 1.5KE6.8_B0_10001 1.5KE6.8_R2_00001 1.5KE6.8_R2_10001 For example : RB500V-40_R2_00001 Part No. Serial number Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2 nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CA THODE UP (PBCU) U FORMING F PANASERT T/B CA THODE DOWN (PBCD) D

PAGE . 6November 15,2012-REV.04 1.5KE SERIES Disclaimer

  • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc..
  • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred.
  • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
  • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
  • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale.
  • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.