15ETH06PBF IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. www.irf.com 15ETH06PbF 15ETH06FPPbF VRRM Peak Repetitive Reverse Voltage 600 V IF(AV) Average Rectified Forward Current @ TC = 140°C 15 A @ TC = 80°C (FULLPACK) IFSM Non Repetitive Peak Surge Current @ TJ = 25°C 120 (FULLPACK) 180 IFM Peak Repetitive Forward Current 30 TJ, TSTG Operating Junction and Storage Temperatures - 65 to 175 °C Parameters Max Units 15ETH06PbF TO-220AC Case Styles Anode 1 3 Cathode Base Cathode 15ETH06FPPbF TO-220 FULLPACK Anode 1 3 Cathode

15ETH06PbF, 15ETH06FPPbF Bulletin PD-20886 rev. A 10/06 2 www.irf.com VBR, Vr Breakdown Voltage, 600 - - V I R = 100μA Blocking Voltage VF Forward Voltage - 1.8 2.2 V I F = 15A, TJ = 25°C - 1.3 1.6 V I F = 15A, TJ = 150°C IR Reverse Leakage Current - 0.2 50 μAV R = VR Rated - 30 500 μAT J = 150°C, VR = VR Rated CT Junction Capacitance - 20 - pF V R = 600V LS Series Inductance - 8.0 - nH Measured lead to lead 5mm from package body Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters Min Typ Max Test ConditionsUnits trr Reverse Recovery Time - 22 30 ns I F = 1A, diF/dt = 100A/μs, VR = 30V -2 8 3 5 I F = 15A, diF/dt = 100A/μs, VR = 30V 29 - - T J = 25°C -7 5 - T J = 125°C IRRM Peak Recovery Current - 3.5 - A T J = 25°C -7 - T J = 125°C Qrr Reverse Recovery Charge - 57 - nC T J = 25°C - 300 - T J = 125°C trr Reverse Recovery Time - 51 - ns IRRM Peak Recovery Current - 20 - A T J = 125°C Qrr Reverse Recovery Charge - 580 - nC Dynamic Recovery Characteristics @ TC = 25°C (unless otherwise specified) IF = 15A diF /dt = 200A/μs VR = 390V Parameters Min Typ Max Test ConditionsUnits IF = 15A diF /dt = 800A/μs VR = 390V Parameters Min Typ Max Units TJ Max. Junction Temperature Range - - 175 °C TStg Max. Storage Temperature Range - 65 - 175 RthJC Thermal Resistance, Junction to Case Per Leg - 1.0 1.3 °C/W (Fullpack) Per Leg - 3.0 3.5 RthJA Thermal Resistance, Junction to Ambient Per Leg - - 70 RthCS Thermal Resistance, Case to Heatsink - 0.5 - Weight - 2.0 - g - 0.07 - (oz) Mounting Torque 6.0 - 12 Kg-cm 5.0 - 10 lbf.in Thermal - Mechanical Characteristics c Typical Socket Mount d Mounting Surface, Flat, Smooth and Greased d c

Bulletin PD-20886 rev. A 10/06 15ETH06PbF, 15ETH06FPPbF www.irf.com Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 4 - Max. Thermal Impedance Z thJC Characteristics Forward Voltage Drop - VFM (V) Instantaneous Forward Current - I F (A) Reverse Voltage - VR (V) Reverse Voltage - VR (V) Junction Capacitance - C T ( p F ) t1, Rectangular Pulse Duration (Seconds) Thermal Impedance Z thJC (°C/W) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Reverse Current - I R (μA) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 100 0.5 1 1.5 2 2.5 3 T = 175˚C T = 150˚C T = 25˚C J J J 0.001 0.01 0.1 100 1000 0 100 200 300 400 500 600 25˚C T = 175˚CJ 100˚C 125˚C 150˚C 100 1000 0 100 200 300 400 500 600 T = 25˚CJ 0.01 0.1 Single Pulse (Thermal Resistance) D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 2t PDM Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc

15ETH06PbF, 15ETH06FPPbF Bulletin PD-20886 rev. A 10/06 4 www.irf.com Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK) t1, Rectangular Pulse Duration (Seconds) Thermal Impedance Z thJC (°C/W) 0.01 0.1 Single Pulse (Thermal Resistance) D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 PDM Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current Average Forward Current - IF(AV) (A) Allowable Case Temperature (°C) Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK) Fig. 8 - Forward Power Loss Characteristics Average Forward Current - IF(AV) (A) Average Forward Current - IF(AV) (A) Allowable Case Temperature (°C) Average Power Loss ( Watts ) (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 100 120 140 160 180 0 4 8 12 16 20 24 DC Square wave (D = 0.50) 80% Rated Vr applied see note (3) 110 120 130 140 150 160 170 180 0 5 10 15 20 25 DC Square wave (D = 0.50) 80% Rated Vr applied see note (3) 0 5 10 15 20 25 DC RMS Limit D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5

Bulletin PD-20886 rev. A 10/06 15ETH06PbF, 15ETH06FPPbF www.irf.com Fig. 8 - Typical Stored Charge vs. di F /dtFig. 7 - Typical Reverse Recovery vs. di F /dt trr ( ns ) Qrr ( nC ) di F /dt (A/μs )di F /dt (A/μs ) 100 100 1000 IF = 30 A IF = 15 A R J J V = 390V T = 125˚C T = 25˚C 200 400 600 800 1000 100 1000 IF = 30 A IF = 15 A R J J V = 390V T = 125˚C T = 25˚C IRFP250 D.U.T. L = 70µH V = 200VR 0.01 Ω G D S dif/dt ADJUST Fig. 11- Reverse Recovery Parameter Test Circuit Reverse Recovery Circuit diF /dt

15ETH06PbF, 15ETH06FPPbF Bulletin PD-20886 rev. A 10/06 6 www.irf.com ta tb trr Qrr IF IRRM I RRM0.5 di(rec)M/dt

0.75 IRRM

Fig. 12 - Reverse Recovery Waveform and Definitions diF /dt 4. Qrr - Area under curve defined by t rr and IRRM 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current Q rr = t rr x I RRM Outline Table Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches)

Bulletin PD-20886 rev. A 10/06 15ETH06PbF, 15ETH06FPPbF www.irf.com 5°± 0.5° 3.1 3.3 13.5 13.7 R0.5 R0.7 (2 PLACES) 3.1 HOLE ø 3.4 10.4 0.7 4.6 TYP. 5°± 0.5° 4.8 0.9 2.54 TYP. 2.54 10.6 16.4 16.0 3.7 7.1 0.48 2.85 2.8 1.4 1.15 15.4 3.2 6.7 15.8 1.05 1.3 0.44 2.65 2.6 TYP 10° Outline Table Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches) Anode 1 3 Cathode LOT CODE ASSEMBLY RECTIFIER INTERNATIONAL IRMX Assembly Line EXAMPLE: ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" LOT CODE 1789 LOGO P = LEAD-FREE PART NUMBER WEEK 19 YEAR 1 = 2001 DATE CODE THIS IS A 15ETH06 Part Marking Information (TO-220) LOT CODE ASSEMBLY RECTIFIER INTERNATIONAL IRXC Assembly Line EXAMPLE: ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" LOT CODE 1789 LOGO WEEK 19 LINE C PART NUMBER DATE CODE YEAR 1 = 2001 P = LEAD-FREE THIS IS A 15ETH06

15ETH06PbF, 15ETH06FPPbF Bulletin PD-20886 rev. A 10/06 8 www.irf.com INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE EXAMPLE: THIS IS A 15ETH06FP IN THE ASSEMBLY LINE "C" ASSEMBLED ON WW 19, 2002 LOT CODE 1789 PART NUMBER P = Lead-Free FP = Fullpack DATE CODE YEAR = 2002 WEEK 19 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/06 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. Ordering Information Table Device Code 1 524 3 1 - Current Rating (15 = 15A) 2 - E = Single Diode 3 - T = TO-220, D 2Pak 4 - H = HyperFast Recovery 5 - Voltage Rating (06 = 600V) 6 - y none = TO-220AC y FP = TO-220 FULLPACK 7 - y none = Standard Production y PbF = Lead-Free Tube Standard Pack Quantity: 50 pieces

15 E T H 06 FP PbF

Part Marking Information (TO-220 FULL-PAK)