15BX MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: 15BX 15BX SPECIFICATIONS ES-0691 Rev.9 Page 1/4 http://www.m-system.co.jp/ Dual Channel Input/Output Isolators 15-RACK STANDARD RACK Functions & Features

  • Standard 19" rack for 15-RACK signal conditioners
  • Line power access at the terminal card, supplied via the rear rack bus
  • Direct output interface with the rack side connector MODEL: 15BX–[1][2]

ORDERING INFORMATION

  • Code number: 15BX-[1][2] Specify a code from below for each [1] and [2]. (e.g. 15BX-4/Q)
  • Specify the specification for option code /Q (e.g. /C01) [1] CONNECTOR 4: Fujitsu FCN type I/O connector 9: Omron DCS connector M-System guarantees the connecting section. [2] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) Power supply and signal conditioner side of the main PWB are not coated. /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

  • Blank filler plate (model: P-101)
  • Connector terminal block (model: CNT)
  • Special cable with 40-pin connector (model: FCN) GENERAL SPECIFICATIONS Construction: Metal plates assembly Coating: Zn-Cr (black), alumetized steel Connection Power input: M4 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated brass Isolation: I/O connector to power to FG INSTALLATION Power input
  • DC: 24 V DC ±10 %, (ripple 10 % p-p max.) Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: JIS or EIA standard rack or surface Weight: 1.9 kg (4.2 lb) PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (I/O connector to power to FG)

MODEL: 15BX 15BX SPECIFICATIONS ES-0691 Rev.9 Page 2/4 http://www.m-system.co.jp/ MOUNTING REQUIREMENTS unit: mm (inch) Observe appropriate wiring space over and under the rack. 450 (17.72) 4–M5 SCREW 465 (18.31) 57.2 (2.25) < EIA > 15 (.59) 50 (1.97) < JIS > ANGLE BRACKET CONNECTION DIAGRAM ■ Fujitsu FCN type I/O connector CN1 + FG POWER ■ Omron DCS connector POWER CN1 CN2 FG DIMENSIONS unit: mm (inch) 168.5 (6.63) 465 (18.31) 50 (1.97) 2 (.08) 15 (.06) 57.2 (2.25) 480 (18.90) 435 (17.13) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 POWER INPUT TERMINALS DCS CONNECTOR

MODEL: 15BX 15BX SPECIFICATIONS ES-0691 Rev.9 Page 3/4 http://www.m-system.co.jp/ I/O CONNECTOR PIN ASSIGNMENT ■ Fujitsu FCN type I/O connector (Fujitsu FCN-365P040-AU)

  • Connector Pin Assignment CONVERTER CONVERTER PIN NO. LOCAT. ASSIGN. PIN NO. LOCAT. ASSIGN. A 1 1 ch. 1 A11 11 ch. 1 B 1 ch. 2 B11 ch. 2 A 2 2 ch. 1 A12 12 ch. 1 B 2 ch. 2 B12 ch. 2 A 3 3 ch. 1 A13 13 ch. 1 B 3 ch. 2 B13 ch. 2 A 4 4 ch. 1 A14 14 ch. 1 B 4 ch. 2 B14 ch. 2 A 5 5 ch. 1 A15 15 ch. 1 B 5 ch. 2 B15 ch. 2 A 6 6 ch. 1 A16 16 ch. 1 B 6 ch. 2 B16 ch. 2 A 7 7 ch. 1 A17 COM. (–) B 7 ch. 2 B17 A 8 8 ch. 1 A18 B 8 ch. 2 B18 A 9 9 ch. 1 A19 Not Used B 9 ch. 2 B19 A10 10 ch. 1 A20 B10 ch. 2 B20 ■ Omron DCS connector (Fujitsu FCN-365P024-AU)
  • Connector Pin Assignment CN1 CONVERTER CN2 CONVERTER A 1 COM. (–) A 1 COM. (–)

2 A2 A

A 4 COM. (–) A 4 COM. (–) A 5 4 ch. 2 A 5 12 ch. 2 A 6 ch. 1 A 6 ch. 1 A 7 3 ch. 2 A 7 11 ch. 2 A 8 ch. 1 A 8 ch. 1 A 9 2 ch. 2 A 9 10 ch. 2 A10 ch. 1 A10 ch. 1 A11 1 ch. 2 A11 9 ch. 2 A12 ch. 1 A12 ch. 1

1 B1 B

2 B2 B COM. (–) COM. (–)

3 B3 B

4 B4 B

B 5 8 ch. 2 B 5 16 ch. 2 B 6 ch. 1 B 6 ch. 1 B 7 7 ch. 2 B 7 15 ch. 2 B 8 ch. 1 B 8 ch. 1 B 9 6 ch. 2 B 9 14 ch. 2 B10 ch. 1 B10 ch. 1 B11 5 ch. 2 B11 13 ch. 2 B12 ch. 1 B12 ch. 1

MODEL: 15BX 15BX SPECIFICATIONS ES-0691 Rev.9 Page 4/4 http://www.m-system.co.jp/ Specifications are subject to change without notice.