1590857 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Features
■Rectangular, plastic ■Many mounting possibilities ■P2-Ri-QR14 included in delivery ■Measuring range displayed via LED ■Immune to electromagnetic interference ■Resolution, 12-bit ■4‐wire, 15…30 VDC ■Analog output ■Programmable measuring range ■0…10 V and 4…20 mA ■Cable connection Wiring diagram Functional principle The measuring principle of inductive angle sensors is based on oscillation circuit coupling between the positioning element and the sensor, whereby an output signal is provided proportional to the angle of the positioning element. The rugged sensors are wear and maintenance-free, thanks to the contactless operating principle. They convince through their excellent repeatability, resolution and linearity within a broad temperature range. The innovative technology ensures a high immunity to electromagnetic DC and AC fields.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|5 RI360P2-QR14-ELIU5X2 | 11/07/2023 15-36 | technical changes reserved Technical data Load resistance current output ≤ 0.4 kΩ Sample rate 800 Hz Current consumption < 50 mA Mechanical data Design Rectangular, QR14 Dimensions 53.5 x 49 x 14 mm Flange type Flange without mounting element Shaft Type Blind hole shaft Shaft diameter D [mm] 6 6.35 Housing material Plastic, PBT-GF30-V0 Electrical connection Cable Cable quality Ø 5.2 mm, Black, LifYY, PVC, 2 m Core cross-section 5 x 0.25 mm Environmental conditions Ambient temperature -25…+70 °C Vibration resistance 55 Hz (1 mm) Vibration resistance (EN 60068-2-6) 20 g; 10…3000 Hz; 50 cycles; 3 axes Shock resistance (EN 60068-2-27) 100 g; 11 ms ½ sine; 3 × each; 3 axes Continuous shock resistance (EN 60068-2-29) 40 g; 6 ms ½ sine; 4000 × each; 3 axes Salt spray test (EN 60068-2-52) Severity degree 5 (4 test cycles) Protection class IP68 IP69K MTTF 138 years acc. to SN 29500 (Ed. 99) 40 Power-on indication LED, Green Measuring range display multifunction LED, green green flashing Included in delivery positioning element P2-Ri-QR14; for technical details see data sheet
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|5 RI360P2-QR14-ELIU5X2 | 11/07/2023 15-36 | technical changes reserved Mounting instructions Mounting instructions/Description Adapter pins provide more flexibility Extensive range of mounting accessories for easy adaptation to many different shaft diameters. LED function Operating voltage Green: Voltage is present Displayed measuring range Green: Positioning element is within the detection range Flashing green: Positioning element is within the measuring range with reduced signal quality (e.g. the distance is too great) Off: Positioning element is outside the sensing range Functional safety thanks to the inductive measuring principle The measuring principle of RLC coupling makes the sensor absolutely wear-free and immune to magnetized ferrous chips and other interference fields. Owing to the differential analysis, the output signal remains almost unchanged, even if the position of the positioning element deviates from the ideal axis of rotation. The distance between the sensor and the positioning element
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|5 RI360P2-QR14-ELIU5X2 | 11/07/2023 15-36 | technical changes reserved Individual (teaching with positioning element) Jumper between teach input Pin 5 (GY) Gnd Pin 3 (BU) Ub Pin 1 (BN) LED 2 seconds start value end value status LED flashes, after 2 s steady 10 seconds CCW rotation, then return to last preset value CW rotation, then return to last preset value after 10 s status LED flashes fast for 2 s 15 seconds - default setting (360°, CW) after 15 s power and status LED alternate Preset – Mode (teaching without positioning element) Jumper between teach input Pin 5 (GY) Gnd Pin 3 (BU) Ub Pin 1 (BN) LED 2 seconds activate preset mode activate preset mode status LED steady, flashes after 2 s 10 seconds CCW rotation, then return to last preset value CW rotation, then return to last preset value after 10 s status LED flashes fast for 2 s 15 seconds - default setting (360°, CW) after 15 s power and status LED alternate Angular range Gnd Ub status LED Pin 3 (BU) Pin 1 (BN) 30° press once - 1 x flashing 45° press twice - 2 x flashing 60° press three times - 3 x flashing 90° - press once 1 x flashing 180° - press twice 2 x flashing 270° - press three times 3 x flashing 360° - press four times 4 x flashing Accessories P1-RI-QR14 1590812 Positioning element for angle sensors RI-QR14, for Ø 6 mm shafts P2-RI-QR14 1590819 Positioning element for angle sensors RI-QR14, for Ø 6.35 mm shafts P3-RI-QR14 1590865 Positioning element for angle sensors RI-QR14, flat design, using shield plate SP1-QR14 is recommended SP1-QR14 1590873 Shield plate Ø 30 mm, aluminium
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 5|5 RI360P2-QR14-ELIU5X2 | 11/07/2023 15-36 | technical changes reserved HSA-M6-QR14 6901051 Adapter for RI-QR14 specific positioning elements, hollow on solid shaft, Ø 6 mm HSA-M8-QR14 6901052 Adapter for RI-QR14 specific positioning elements, hollow on solid shaft, Ø 8 mm DS-RI-QR14 1590814 Spacer sleeves for rear mounting of RI-QR14, 2 pcs. per bag