1590201 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

■Rectangular, aluminium / plastic ■Versatile mounting possibilities ■Measuring range displayed via LED ■Immune to electromagnetic interference ■Extremely short blind zones ■Resolution 0.001 mm ■15…30 VDC ■Male M12 x 1, 8-pin ■SSI output ■25 bit, Gray-coded, synchronous ■SSI clock rate: 62.5 kHz … 1 MHz Wiring diagram Functional principle

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|5 LI100P0-Q25LM0-HESG25X3-H1181 | 11/07/2023 15-33 | technical changes reserved Technical data Bit 22: Positioning element is in the measuring range, lower signal quality (e.g. distance too large) Bit 23: Positioning element is outside the measuring range Bit 24: synchronous operation active Sample rate 5000 Hz The sensor's sampling rate depends on the master's SSI cycle time. Sampling rate 1…

5 KHz in synchronized operating mode

Current consumption < 50 mA Mechanical data Design Profile, Q25L Dimensions 158 x 35 x 25 mm Housing material Aluminum/plastic, PA6-GF30, Anodized Active area material Plastic, PA6-GF30 Electrical connection Connector, M12 × 1 Environmental conditions Ambient temperature -25…+70 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 138 years Power-on indication LED, Green Measuring range display multifunction LED, green, yellow, yellow flashing The measuring principle of linear position sensors is based on RLC coupling between the positioning element and the sensor, whereby an output signal is provided proportional to the position of the positioning element. The rugged sensors are wear and tear-free, thanks to the contactless operating principle. They convince through their excellent repeatability, resolution and linearity within a broad temperature range. The innovative technology ensures a high immunity to electromagnetic DC and AC fields.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|5 LI100P0-Q25LM0-HESG25X3-H1181 | 11/07/2023 15-33 | technical changes reserved Mounting instructions Mounting instructions/Description Extensive mounting accessories provide various options for installation. The measuring principle of RLC coupling makes the sensor immune to magnetized metal splinters and other interference fields. LED indicates status: Green: Sensor is supplied properly, asynchronous mode Green flashing: Sensor is supplied properly, synchronous mode Green fast flashing: Sensor is supplied properly but is not receiving CLK pulses from the SSI master LED indicates measuring range Green: Positioning element is in range Yellow: Positioning element is in range, signal low (e.g. distance too great), see status bit 22 Yellow flashing: Positioning element is out of range, see status bit 23 LED OFF: Positioning element is outside the programmed range (only with teachable versions) Note: Pin 8 should be kept potential-free Accessories P1-LI-Q25L 6901041 Guided positioning element for linear position sensors LI-Q25L, inserted in the groove of the sensor P2-LI-Q25L 6901042 Floating positioning element for linear position sensors LI-Q25L; the nominal distance to the sensor is 1.5 mm; pairing with the linear position sensor at a distance of up to 5 mm or misalignment tolerance of up to 4 mm.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|5 LI100P0-Q25LM0-HESG25X3-H1181 | 11/07/2023 15-33 | technical changes reserved P3-LI-Q25L 6901044 Floating positioning element for Li-Q25L linear position sensors; operational at an offset of 90 ; nominal distance to sensor 1.5 mm; pairing with linear position sensor at a distance of up to 5 mm; misalignment tolerance of up to 4 mm P6-LI-Q25L 6901069 Floating positioning element for linear position sensors LI-Q25L; the nominal distance to the sensor is 1.5 mm; pairing with the linear position sensor at a distance of up to 5 mm or misalignment tolerance of up to 4 mm. P7-LI-Q25L 6901087 Guided positioning element for linear position sensors LI-Q25L, without ball joint M1-Q25L (2 PCS) 6901045 Mounting foot for linear position sensors LI-Q25L; material: aluminum; 2 pcs. per bag M2-Q25L 6901046 Mounting foot for linear position sensors LI-Q25L; material: aluminum; 2 pcs. per bag M4-Q25L 6901048 Mounting bracket and sliding block for linear position sensors LI-Q25L; material: Stainless steel; 2 pcs. per bag MN-M4-Q25 6901025 Sliding block with M4 thread for the backside profile of the LI-Q25L; material: galvanized steel; 10 pcs. per bag AB-M5 6901057 Axial Joint for Guided Positioning Elements ABVA-M5 6901058 Axial joint for guided positioning element, stainless steel RBVA-M5 6901059 Angle joint for guided positioning element, stainless steel

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 5|5 LI100P0-Q25LM0-HESG25X3-H1181 | 11/07/2023 15-33 | technical changes reserved Wiring accessories Dimension drawing Type ID E-RKC 8T-264-2 U-04781 Connection cable, female M12, straight, 8-pin (twisted pairs),shielded, cable length: 2 m, sheath material: PVC, black; cULus approval; other cable lengths and qualities available, see www.turck.com