1590067 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

■Rectangular, aluminium / plastic ■Versatile mounting possibilities ■Positioning element P1-Li-Q25L, mounting aid M1-Q25L included in delivery ■LED indicates measuring range ■Immune to electromagnetic interference ■Extremely short blind zones ■Resolution, 12-bit ■4‐wire, 15…30 VDC ■Analog output ■Programmable measuring range ■0…10 V and 4…20 mA ■M12 × 1 male, 5-pin Wiring diagram Functional principle The measuring principle of linear position sensors is based on RLC coupling between the positioning element and the sensor, whereby

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|4 LI800P1-Q25LM1-LIU5X3-H1151 | 11/07/2023 15-34 | technical changes reserved Technical data Sample rate 500 Hz Current consumption < 50 mA Mechanical data Design Profile, Q25L Dimensions 858 x 35 x 25 mm Housing material Aluminum/plastic, PA6-GF30, Anodized Active area material Plastic, PA6-GF30 Electrical connection Connector, M12 × 1 Environmental conditions Ambient temperature -25…+70 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 138 years acc. to SN 29500 (Ed. 99) 40 Power-on indication LED, Green Measuring range display multifunction LED, green, yellow, yellow flashing Included in delivery P1-Li-Q25L, M1-Q25L an output signal is provided proportional to the position of the positioning element. The rugged sensors are wear and tear-free, thanks to the contactless operating principle. They convince through their excellent repeatability, resolution and linearity within a broad temperature range. The innovative technology ensures a high immunity to electromagnetic DC and AC fields.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|4 LI800P1-Q25LM1-LIU5X3-H1151 | 11/07/2023 15-34 | technical changes reserved Mounting instructions Mounting instructions/Description Extensive mounting accessories provide various options for installation. Due to the measuring principle, which is based on the functional principle of an RLC coupling, the linear position sensor is immune to magnetized metal splinters and other interferences. Status display via LED Green: Sensor is supplied properly LED indicates measuring range Green: Positioning element is within the measuring range Yellow: Positioning element is within the measuring range, low signal intensity (e.g. distance too large) Yellow flashing: Positioning element is outside the detection range Off: Positioning element is outside the programmed range (only with teachable versions) Teaching The start and end point of the measuring range are set by pressing the button on the teach adapter. Moreover there is the possibility of inverting the course of the output curve. Bridge pin 5 and pin 1 for 10 s = factory setting Bridge pin 5 and pin 3 for 10 s = factory setting inverted Bridge pin 5 and pin 3 for 2 s = sets start value of measuring range Bridge pin 5 and pin 1 for 2 s = sets end value of measuring range Accessories P1-LI-Q25L 6901041 Guided positioning element for linear position sensors LI-Q25L, inserted in the groove of the sensor P2-LI-Q25L 6901042 Floating positioning element for linear position sensors LI-Q25L; the nominal distance to the sensor is 1.5 mm; pairing with the linear position sensor at a distance of up to 5 mm or misalignment tolerance of up to 4 mm.

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 4|4 LI800P1-Q25LM1-LIU5X3-H1151 | 11/07/2023 15-34 | technical changes reserved P3-LI-Q25L 6901044 Floating positioning element for Li-Q25L linear position sensors; operational at an offset of 90 ; nominal distance to sensor 1.5 mm; pairing with linear position sensor at a distance of up to 5 mm; misalignment tolerance of up to 4 mm P6-LI-Q25L 6901069 Floating positioning element for linear position sensors LI-Q25L; the nominal distance to the sensor is 1.5 mm; pairing with the linear position sensor at a distance of up to 5 mm or misalignment tolerance of up to 4 mm. P7-LI-Q25L 6901087 Guided positioning element for linear position sensors LI-Q25L, without ball joint M1-Q25L (2 PCS) 6901045 Mounting foot for linear position sensors LI-Q25L; material: aluminum; 2 pcs. per bag M2-Q25L 6901046 Mounting foot for linear position sensors LI-Q25L; material: aluminum; 2 pcs. per bag M4-Q25L 6901048 Mounting bracket and sliding block for linear position sensors LI-Q25L; material: Stainless steel; 2 pcs. per bag MN-M4-Q25 6901025 Sliding block with M4 thread for the backside profile of the LI-Q25L; material: galvanized steel; 10 pcs. per bag AB-M5 6901057 Axial Joint for Guided Positioning Elements ABVA-M5 6901058 Axial joint for guided positioning element, stainless steel RBVA-M5 6901059 Angle joint for guided positioning element, stainless steel