1585000 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
■Threaded barrel, M12 x 1 ■Stainless steel, 1.4301 ■For vehicle board nets, 12 V and 24 V ■Increased interference immunity 100 V/m radiated acc. ISO 11452-4 and 100 mA BCI acc. to ISO 11452-2 ■Load-dump protection acc. to DIN ISO 7637-2 (SAE J 113-11) ■Extended temperature range ■High protection class IP68/IP69K ■Protection against salt spray and rapid temperature change ■Laser engraved label, permanently legible ■DC 3-wire, 8.4…65 VDC ■NO contact, PNP output ■M12 x 1 male connector ■E1 type approval from German federal office for motor vehicles Wiring diagram
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|3 BI4-EM12E-AP45XLD-H1141 | 11/07/2023 14-29 | technical changes reserved Technical data Mechanical data Design Threaded barrel, M12 x 1 Dimensions 62 mm Housing material Stainless steel, 1.4301 (AISI 304) Active area material Plastic, PA12-GF30 Max. tightening torque of housing nut 10 Nm Electrical connection Connector, M12 × 1 Environmental conditions Ambient temperature -40…+85 °C Temperature changes (EN60068-2-14) -40… +85 °C; 20 cycles Vibration resistance 55 Hz (1 mm) Vibration resistance (EN 60068-2-6) 20 g; 10…3000 Hz; 50 cycles; 3 axes Shock resistance 30 g (11 ms) Shock resistance (EN 60068-2-27) 150 g; 6 ms ½ sine; 3 × each; 3 axes Continuous shock resistance (EN 60068-2-29) 100 g; 11 ms ½ sine; 3 × each; 3 axes Salt spray test (EN 60068-2-52) Severity degree 5 (4 test cycles) Protection class IP68 IP69K MTTF 2283 years acc. to SN 29500 (Ed. 99) 40 Switching state LED, Yellow Functional principle Maximum reliability even under the most extreme environmental conditions is guaranteed by our sensors for mobile applications. TURCK's inductive sensors for extremely hostile industrial environments not only meet, but even exceed the requirements of the protection classes IP68 and IP69. Applied in vehicles for road construction or in agricultural machines, these sensors excel in high vibration and shock resistance and they withstand fast temperature cycles.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|3 BI4-EM12E-AP45XLD-H1141 | 11/07/2023 14-29 | technical changes reserved Mounting instructions Mounting instructions/Description Distance D 2 x B Distance W 3 x Sn Distance T 3 x B Distance S 1.5 x B Distance G 6 x Sn Diameter active area B Ø 12 mm Accessories BST-12B 6947212 Mounting clamp for threaded barrel sensors, with dead-stop; material: PA6 QM-12 6945101 Quick-mount bracket with dead-stop; material: Chrome-plated brass. Male thread M16 × 1. Note: The switching distance of the proximity switches may change when using quick-mount brackets. MW-12 6945003 Mounting bracket for threaded barrel sensors; material: Stainless steel A2 1.4301 (AISI 304) BSS-12 6901321 Mounting clamp for smooth and threaded barrel sensors; material: Polypropylene