1549700000 WEIDMULLER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Creation date September 14, 2021 4:39:12 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 1 VPU II 0 1000V/40KA AC Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Similar to illustration Spare arrester Type II Weidmüller VPU II surge protection products protect low-voltage consumer installations and electronic devices against overvoltages that can occur as a result of atmospheric discharges (thunderstorms) or switching operations (transients). The VPU II series meets the Type II and Type III requirements acc. to IEC 61643-11:2012 and Type 2 and Type 3 requirements acc. to EN 61643-11:2012. The spare arresters are coded and can only be inserted into suitable bases. General ordering data Version Surge voltage arrester, Low voltage, Accessories, Spare arrester Order No. 1549700000 Type VPU II 0 1000V/40KA AC GTIN (EAN) 4050118356182 Qty. 1 pc(s).
VPU II 0 1000V/40KA AC Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 4:39:12 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 2 Dimensions and weights Depth 64 mm Depth (inches) 2.52 inch Height 52 mm Height (inches) 2.047 inch Width 17.8 mm Width (inches) 0.701 inch Net weight 95 g Temperatures Humidity 5 - 95% rel. humidity General data Colour orange Design Installation housing; 1TE, Insta IP 20 Optical function display green = OK; red = arrester is defective - replace Protection degree IP20 Rail TS 35 UL 94 flammability rating V-0 Version Spare arrester Insulation coordination acc. to EN 50178 Pollution severity 2 Surge voltage category III Rated data IEC / EN Discharge current In (8/20µs) wire-PE 20 kA Energy coordination (≤10 m) Type II, Type III Frequency range, max. 60 Hz Frequency range, min. 50 Hz Fuse 125 A gL > (if back up fuse > 125 A), No Fuse neccessary ≤125 A gG Leakage current at Un 30 µA Max. continuous voltage, Uc (AC) 1000 V Number of poles 1 Protection level Up at IN (L/N-PE) ≤ 3.8 kV Rated voltage (AC) 830 V Requirements category acc. to IEC 61643-11 Type II Requirements class, acc. to EN 61643-11 T2 Response time ≤ 25 ns Short-circuit current rating ISCCR 25 kA Standards IEC61643-11, EN61643-11 Temporary surge voltage (over-voltage) - TOV 1,205 V Voltage type AC Connection data Type of connection pluggable Classifications ETIM 6.0 EC000941 ETIM 7.0 EC000941 ETIM 8.0 EC000941 ECLASS 9.0 27-13-08-05 ECLASS 9.1 27-13-08-05 ECLASS 10.0 27-13-08-05 ECLASS 11.0 27-13-08-05
VPU II 0 1000V/40KA AC Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 4:39:12 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 3 Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity EAC VPU SERIES EU_Konformitätserklärung / EU_Declaration_of_Conformity EU_Konformitätserklärung / EU_Declaration_of_Conformity Engineering Data EPLAN, WSCAD Catalogues Catalogues in PDF-format Brochures
VPU II 0 1000V/40KA AC Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Drawings Creation date September 14, 2021 4:39:12 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 4 Electric symbol Schematic circuit diagram