153CMQ100

153CMQ IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

SCHOTTKY RECTIFIER 150 Amp 153CMQ... SERIES www.irf.com 1 PD-2.253 rev. A 12/97 IF(AV) Rectangular 150 A waveform VRRM range 80 to 100 V IFSM @ tp = 5 µs sine 7000 A VF @ 75Apk, TJ = 125°C 0.80 V (per leg) TJ range - 55 to 175 °C Dimensions in millimeters and inches Outline D-60 (Modified JEDEC TO-249AA) CASE STYLE AND DIMENSIONS Major Ratings and Characteristics Characteristics 153CMQ... Units The 153CMQ isolated, center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175 °C T J operation Isolated heatsink Center tap module Multiple leads per terminal for high frequency, high current PC board mounting High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Low profile, high current package Description/Features

153CMQ... Series PD-2.253 rev. A 12/97 www.irf.com TJ Max. Junction Temperature Range -55 to 175 °C Tstg Max. Storage Temperature Range -55 to 175 °C RthJC Max. Thermal Resistance Junction 1.0 °C/W DC operation * See Fig. 4 to Case (Per Leg) RthJC Max. Thermal Resistance Junction 0.50 °C/W DC operation to Case (Per Package) RthCS Typical Thermal Resistance, Case 0.10 °C/W Mounting surface , smooth and greased to Heatsink wt Approximate Weight 56 (2.0) g (oz.) T Mounting Torque Min. 40 (35) Max. 58 (50) Case Style D-60 (TO-249AA) Modified JEDEC Thermal-Mechanical Specifications Kg-cm (Ibf-in) VFM Max. Forward Voltage Drop 0.96 V @ 75A (Per Leg) * See Fig. 1 (1) 1.19 V @ 150A

0.80 V @ 75A

0.99 V @ 150A

IRM Max. Reverse Leakage Current 1.5 mA T J = 25 °C (Per Leg) * See Fig. 2 (1) 20 mA T J = 125 °C CT Max. Junction Capacitance (Per Leg) 1400 pF V R = 5VDC , (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 9.2 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10,000 V/ µs (Rated VR ) TJ = 25 °C TJ = 125 °C Electrical Specifications (1) Pulse Width < 300µs, Duty Cycle <2% VR = rated VR Absolute Maximum Ratings Following any rated load condition and with rated VRRM applied Parameters 153CMQ Units Conditions IF(AV) Max. Average Forward Current 150 A 50% duty cycle @ T C = 90 °C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 7000 5µs Sine or 3µs Rect. pulse Surge Current (Per Leg) * See Fig. 7 720 10ms Sine or 6ms Rect. pulse E AS Non-Repetitive Avalanche Energy 15 mJ T J = 25 °C, IAS = 1 Amps, L = 30 mH (Per Leg) IAR Repetitive Avalanche Current 1 A Current decaying linearly to zero in 1 µsec (Per Leg) Frequency limited by T J max. VA = 1.5 x VR typical A Part number 153CMQ080 153CMQ100 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Parameters 153CMQ Units Conditions Parameters 153CMQ Units Conditions Voltage Ratings 80 100

153CMQ... Series PD-2.253 rev. A 12/97 www.irf.com Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 100 1000 FM FInstantaneous Forward Current - I (A) T = 175°C T = 125°C T = 25°C J J J Forward Voltage Drop - V (V) .001 .01 100 1000 0 2 04 06 08 0 1 0 0 R R T = 175°C 150°C 125°C 100°C 75°C 50°C 25°C J Reverse Voltage - V (V) Reverse Current - I (mA) 100 1000 10000 0 1 02 03 04 05 06 07 08 09 0 1 0 0 1 10 T = 25°CJ Reverse Voltage - V (V)R TJunction Capacitance - C (pF) .001 .01 D = 0.33 D = 0. 50 D = 0. 25 D = 0. 17 D = 0. 08 thJC t , Rectangular Pulse Duration (Seconds) Thermal Impedance - Z (°C/W) S ingle P ulse (Thermal Resi stance) PDM Not es: 1. D uty factor D = t / t 2. P eak T = P x Z + T JD Mt h J CC

153CMQ... Series PD-2.253 rev. A 12/97 www.irf.com Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 8 - Unclamped Inductive Test Circuit Fig. 6 - Forward Power Loss Characteristics (Per Leg) 0 10 20 30 40 50 60 70 80 90 10011 DC Average Power Loss - (Watts) F(AV) D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 RMS Li mit Average Forward Current - I (A ) 100 120 140 160 180 0 20 40 60 80 100 120 DC A llowable Case Temperature - (°C) A verage Forw ard C urrent - I (A )F(AV) 153CMQ R (DC) = 1. 0°C/WthJC 100 1000 10000 10 100 1000 10000 FSM p Non-Repetitive Surge Current - I (A) At Any Rated Load Condition And With Rated V Applied Following Surge RRM Square Wave Pulse Duration - t (microsec) FREE-WHEEL DIODE 40HFL40S02CURRENT MONITOR HIGH-SPEED SWITCHIRFP460 L DUT Rg = 25 ohm Vd = 25 Volt+