1536603 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
■Threaded barrel, M18 x 1 ■Chrome-plated brass ■Potentiometer to adjust the characteristic ■Actuated via short-circuiting ring, blind hole or the like ■4‐wire, 15…30 VDC ■Analog output ■0…10 V and 4…20 mA ■Cable connection Wiring diagram Functional principle Simple control tasks can be solved with the inductive linear position sensors of the WI series from Turck. They are selectively operated with a non-ferrous metal ring or blind hole and provide a distance proportional, analog output signal.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|3 WI40-M18-LIU5 | 11/07/2023 13-04 | technical changes reserved Technical data Mechanical data Design Threaded barrel, M18 x 1 Dimensions 109 mm Probe length 45 mm Housing material Metal, CuZn, Chrome-plated Active area material Plastic, PVC rigid, black End cap Plastic, PUR, black Max. tightening torque of housing nut 25 Nm Electrical connection Cable Cable quality Ø 5.2 mm, Gray, LifYY, PVC, 2 m Core cross-section 4 x 0.34 mm Environmental conditions Ambient temperature -25…+70 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 751 years acc. to SN 29500 (Ed. 99) 40 Included in delivery brass ring Mounting instructions Mounting instructions/Description Distance D 72 mm Distance W 2 x B Distance T 5 x B Distance S 1 x B Distance G 3 x B Distance N 55 mm Diameter active area B Ø 18 mm Use non-ferrous metals for ring or blind hole only. The diameter of the blind hole depends on its wall thickness and the material. Only the use of the NF‐ring, which is included in the delivery, ensures that the values stated in the data sheet are observed. In case of non-observance or use of a blind hole, the measuring range may be reduced.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|3 WI40-M18-LIU5 | 11/07/2023 13-04 | technical changes reserved Accessories BST-18B 6947214 Mounting clamp for threaded barrel sensors, with dead-stop; material: PA6 QM-18 6945102 Quick-mount bracket with dead-stop; material: Chrome-plated brass. Male thread M24 × 1.5. Note: The switching distance of the proximity switches may change when using quick-mount brackets. MW-18 6945004 Mounting bracket for threaded barrel sensors; material: Stainless steel A2 1.4301 (AISI 304) BSS-18 6901320 Mounting clamp for smooth and threaded barrel sensors; material: Polypropylene