1534124 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
■Plastic, PBT‐GF30‐V0 ■Response time 1 s ■Cutoff frequency 6 Hz ■Measuring range adjustable via teach adapter TX1-Q20L60 ■10…30 VDC ■Two counter-running 0.1 … 4.9 V analog outputs improve machine safety through redundancy Wiring diagram Functional principle The TURCK inclinometers incorporate a micromechanical pendulum, operating on the principle of MEMS technology (Mikro Elektro Mechanic Systems). The pendulum basically consists of two 'plate' electrodes arranged in parallel with a dielectric placed in the middle. When the sensor is inclined, the dielectric in the middle moves, causing the capacitance ratio between both electrodes to change. The downstream electronics evaluates this change in capacitance and generates a corresponding output signal.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|3 B1N360V-Q20L60-2LU3/S1217 | 11/07/2023 15-48 | technical changes reserved Technical data Current consumption 50…105 mA (voltage-dependent) Mechanical data Design Rectangular, Q20L60 Dimensions 60 x 30 x 20 mm Housing material Plastic, PC Electrical connection Cable Cable quality Ø 5.5 mm, Lif32Y32Y, TPE, 2 m Low temp. flexible and E-chain capable Core cross-section 5 x 0.34 mm Environmental conditions Ambient temperature -30…+70 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP68 IP69K MTTF 203 years acc. to SN 29500 (Ed. 99) 40 Mounting instructions Mounting instructions/Description Adjusting the measuring range via TX1-Q20L60 teach adaptor Setting the angular range in CW direction: 1. Move sensor to start position 2. Press and hold Teach-Gnd until the output is set to 4 mA (approx. 1 s) 3. Move sensor to end position 4. Press and hold Teach-Gnd until the output is set to 20 mA (approx. 3 s) Resetting the angular range: 1. Press and hold Teach-Gnd until the output is set to 12 mA (approx. 6 s) 2. Angle measurement is set back to 360° degrees (in position "connector outgoing topwards" the sensor provides an output signal in accordance with 0° degrees)
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|3 B1N360V-Q20L60-2LU3/S1217 | 11/07/2023 15-48 | technical changes reserved Accessories GUARD-Q20L60 A9684 Protective housing for Q20L60 inclinometers for protecting against mechanical impact; material: Stainless steel