1654742 TEC | Alldatasheet
Document overview
- PDF pages: 62
Technical content
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com METRIC Dimensions are millimetres over inches Rast 5 Table of Contents AMP multifitting Mark II AMP MONO-SHAPE AMP MONO-SHAPE Mark II Standard Timer
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com METRIC Dimensions are millimetres over inches Introduction I Direct Mating Connectors for PC Boards, 2–8 Positions, up to 6 A Current Carrying Capacity I Indirect Mating Connectors, 1–8 Positions, up to 16 A Current Carrying Capacity I Variable Keying I Double Wire Termination possible Product Features Tyco Electronics’ newly designed AMP multifitting Mark II Connector System was developed according to the latest connector design standards. The requirements of advanced In-Line mating technology for the components and contacts of pc boards are incorporated in the direct and indirect versions of these connector systems. This system is suitable for a wide wire size range. Current carrying capacity is 16 A maximum. Double termination is possible with 0.5 and 0.5 mm 2 or 0.5 and 0.75 mm2 conductors. The connectors are avail- able in 1- to 8-positions (indirect) resp. 2- to 8- positions (direct) with an exterior locking device. Interior locking options are available on request. Supplied in chain and provided with all keying and polarisation ribs, the connectors can be operated economically with modern Application Tooling Equipment.
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 Direct and Indirect Mating Connection, 5.0 mm Centerline METRIC Dimensions are millimetres over inches Indirect Mating Connection, 5.0 mm Centerline
1 Double Wire Exit
2 Wire Exit 90°
3 Wire Exit 180°
4 Cover
5 Exterior Locking Latch
6 Keying
7 Polarisation
Indirect Mating Connection with Interior Locking, 5.0 mm Centerline
5 Interior Locking Latch
Direct Mating Connection, 5.0 mm Centerline
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com METRIC Dimensions are millimetres over inches Derating Curves Direct Mating Connector System Connector: 8 positions Material: Brass, tin plated Wire: 0.5 mm2 PC Board: FR4, 2 x 0.35 µm Copper, tin plated 0 1 02 03 04 05 06 07 08 09 0 1 0 0 1 1 0 t/°C I/A Current Ambient Temperature Indirect Mating Connector System Material: Brass, tin plated Wire: 0.5 mm2 (Curve 1 and 2) 1.0 mm2 (Curve 3) Mating Part: 6.3 x 0.8 mm Tab, Brass, tin plated 02 04 06 08 0 100 t/ϒ/ϒ/ CϒCϒ I/A/A/ 120 2 1 Ambient Temperature Curve 1: 2 positions Curve 2: 8 positions Curve 3: 4 positions Indirect Mating Connector System Material: CuNi2Si, silver plated Wire: 1 .5 mm2, tin plated Mating Part: 6.3 x 0.8 mm Tab, Brass, tin plated 0 2 04 06 08 0 1 0 0 t/°C I/A 120 140 Ambient Temperature Curve 1: 1 position Curve 2: 4 positions Current Current
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com METRIC Dimensions are millimetres over inches Rast 5 Keying Plan and Cable Exit Keying Plan from Mating Direction, Fully-Keyed Version
1 Locking Latch
2 Keying Rib
3 Polarisation Rib
4 Cavity Number
– 1 – – 2 – – 3 – – 4 – – 5 – 1 2 Keyed Version: 05-C according RAST 5 This final keying version will be produced on the Application Tooling Equipment. Cable Exit with Interior Locking Cable Exit with Interior and Exterior Locking Cable Exit with Exterior Locking – 1 – – 2 – – 3 – – 4 – – 5 – c a d bd b c Direct Mating of a PCB with PC Board Frames
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com METRIC Dimensions are millimetres over inches Technical Features Technical Data Centerline: 5.0 mm Housing Material: Polyamide, PA 6.6 and PA 6 Standard Colour: Natural Current Voltage:
250 V ~
Air and Creepage Distance: >3.2 mm Flammability Rating: UL 94 V-2 Approvals: VDE, UL No. of Positions: 2- to 8-positions Contact Material: Brass Contact Finish: Tin plated Wire Size Range: 0.35–1.0 mm2 Temperature Range: –40 °C up to +105 °C Current Rating: 6 A max. Insulation Diameter: 2.8 mm max. Insulation Resistance: >10 MΩ Mating Force: ≤7 N per contact* Unmating Force: ≥1.5 N* Product Specification: 108-18653 Application Specification: 114-18289 ) measured with polished steel plate 1.5 mm thickness No. of Positions: 1- to 8-positions Contact Material: Brass / CuNi2Si Contact Finish: Tin plated / silver plated Wire Size Range: Temperature Range: –40 °C up to +130 °C Current Rating:
10 A, up to 4 contacts 16 A
Insulation Diameter: 3.0 mm max. Insulation Resistance: >10 MΩ Mating Force: ≤6.5 N per contact Unmating Force: ≥1.5 N Product Specification: 108-18652 Application Specification: 114-18288, 114-18382 ) measured with polished steel tab 6.3 x 0.8 mm Direct Mating Connectors Indirect Mating Connectors
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com METRIC Dimensions are millimetres over inches Rast 5 Direct Mating Connector System – 1 –– 2 – RAST 5 Version Package Quantity Part Numbers with Exterior Locking PA 6.6 PA 6 * Part Numbers with Interior Locking PA 6.6 PA 6 * 1-1241172-2 1-1534075-2 4,900 – – 1-1241172-3 1-1534075-3 3,136 – – 1-1241172-3 1-1534075-3 3,136 – – 1-1241172-4 1-1534075-4 2,352 – – 1-1241172-4 1-1534075-4 2,352 – – 1-1241172-5 1-1534075-5 1,960 – – 1-1241172-5 1-1534075-5 1,960 – – *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. Technical Data Wire Size Range: 0.35–1 .0 mm2 Current Carrying Capacity (max.): 6 A
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com METRIC Dimensions are millimetres over inches Direct Mating Connector System (continued) RAST 5 Version Package Quantity Part Numbers with Exterior Locking PA 6.6 PA 6* Part Numbers with Interior Locking PA 6.6 PA 6 * *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. 1-1241172-6 1-1534075-6 1,568 – – 1-1241172-6 1-1534075-6 1,568 – – 2-1241172-6 2-1534075-6 1,568 – – 1-1241172-7 1-1534075-7 1,372 – – 1-1241172-7 1-1534075-7 1,372 – – 1-1241172-8 1-1534075-8 1,176 – – 1-1241172-8 1-1534075-8 1,176 – – Technical Data Wire Size Range: 0.35–1 .0 mm2 Current Carrying Capacity (max.): 6 A
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP multifitting Mark II Connectors in In-Line Mating Technology Indirect Mating Connector System – 1 – – 1 –– 2 – 1-1241170-2 1-1534072-2 4,900 1-1394355-2 1-1534077-2 1-1241170-3 1-1534072-3 3,136 1-1394355-3 1-1534077-3 1-1241170-3 1-1534072-3 3,136 1-1394355-3 1-1534077-3 1-1241170-4 1-1534072-4 2,352 1-1394355-4 1-1534077-4 1-1241170-4 1-1534072-4 2,352 1-1394355-4 1-1534077-4 1-1241170-5 1-1534072-5 1,960 1-1394355-5 1-1534077-5 1-1241170-5 1-1534072-5 1,960 1-1394355-5 1-1534077-5 1-1241170-1 1-1534072-1 9,604 -1241170-1 1-1534072-1 Technical Data Wire Size Range: 0.35–1 .0 mm2 Current Carrying Capacity (max.): 10 A *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. RAST 5 Version Package Quantity Part Numbers with Exterior Locking PA 6.6 PA 6 * Part Numbers with Interior Locking PA 6.6 PA 6 * METRIC Dimensions are millimetres over inches
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology Indirect Mating Connector System (continued) 1-1241170-6 1-1534072-6 1,568 – – 2-1241170-6 2-1534072-6 1,568 – – 1-1241170-7 1-1534072-7 1,372 – – 1-1241170-7 1-1534072-7 1,372 1394355-7 1534077-7 1-1241170-8 1-1534072-8 1,176 – – 1-1241170-8 1-1534072-8 1,176 – – 1-1241170-6 1-1534072-6 1,568 – – Technical Data Wire Size Range: 0.35–1 .0 mm2 Current Carrying Capacity (max.): 10 A *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. RAST 5 Version Package Quantity Part Numbers with Exterior Locking PA 6.6 PA 6* Part Numbers with Interior Locking PA 6.6 PA 6* METRIC Dimensions are millimetres over inches
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP multifitting Mark II Connectors in In-Line Mating Technology Indirect Mating Connector System (continued) – 1 – – 1 –– 2 – 1-1241171-2 1-1534073-2 4,900 1-1394556-2 1-1534078-2 1-1241171-3 1-1534073-3 3,136 1-1394556-3 1-1534078-3 1-1241171-3 1-1534073-3 3,136 1-1394556-3 1-1534078-3 1-1241171-4 1-1534073-4 2,352 1-1394556-4 1-1534078-4 1-1241171-4 1-1534073-4 2,352 1-1394556-4 1-1534078-4 1-1241171-1 1-1534073-1 9,604 1--1241171-1 1-1534073-1 Technical Data Wire Size Range: 1 .0–1 .5 mm2 Current Carrying Capacity (max.): 16 A *)According to IEC 60695-2-1/1; GWT (Glow Wire Test) 750 °C without flame, see VDE M-Test Report. The final keying version will be produced on the Application Tooling Equipment. RAST 5 Version Package Quantity Part Numbers with Exterior Locking PA 6.6 PA 6 * Part Numbers with Interior Locking PA 6.6 PA 6 * METRIC Dimensions are millimetres over inches
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP multifitting Mark II Connectors in In-Line Mating Technology PC Board Frame 2 5 10.1 1c, 2d 1/2 – – 2-964577-2 2,200 1c, 2d, 3c 1/2, 3/4 2b – 1-964577-4 4 15 20.1 1c, 3c, 4d 1/2, 3/4 4b – 2-964577-4 1,700 1c, 3c, 4d 1/2, 3/4 1b, 4a – 3-964577-4 5 20 25.1 3d 1/2, 4/5 – – 1-964577-5 1,500 6 25 30.1 4d 1/2, 5/6 6b – 1-964577-6 1,5004d 1/2, 5/6 1b, 6a – 2-964577-6 7 30 35.1 2c, 3d, 7c 2/3, 5/6 1b, 2b 4/5 1-964577-7 1,2002c, 3d, 7c 2/3, 5/6 2b, 7a 4/5 2-964577-7 8 35 40.1 2c, 3d, 7c 2/3, 7/8 2a 4/5 1-964577-8 1,0002c, 3d, 7c 2/3, 7/8 2b, 4b 4/5 2-964577-8 122 55 60.1 1c, 2d, 3c, 4d, 1/2, 3/4, 5/6, 2b, 3a, 4a, 6a, 4/5, 8/9 1-964578-2 1.5005c, 8c, 10d, 12d 8/9, 9/10, 11/12 7a, 7b, 8a, 8b Preferred Parts are printed bold No. of Positions Keying Latching Polarisation Additional Board Lock Package Quantity Dimensions (mm) AB Part Number PC Board Frame, PA 6.6, Black B A Latching Hole Keying PC Board Frame PC Board METRIC Dimensions are millimetres over inches
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Introduction METRIC Dimensions are millimetres over inches AMP MONO-SHAPE Connectors in In-Line Mating Technology AMP MONO-SHAPE connectors represent a valid solution to the ever-increasing requirements for production and application flexibility. They are high productivity, great flexibility, quality, minimum applied cost. AMP MONO-SHAPE product- line includes a full range of 5.0 mm pitch modular connectors contents with similar outer shape, several variation in the mating area such as PC Board and 6.3 x 0.8 mm tabs (RAST 5), plus a version for harness shunts. AMP MONO-SHAPE connection system adopts the IDC termination technology, which improves application results and quality level. The AMP MONO-SHAPE product range, combined with the performances and properties offered by the termination system, allow to manufacture extremely complicated harness structures while still maintaining high production levels. I IDC Connector system design to maximise the full integration with the application tooling assuring total flexibility in harness design. I High current system, up to 16 Ampere, designed to satisfy several appliance requirements. I ID Contact designed to accept standard discrete wires ranging from 0.5 up to 1 .5 mm 2, according to the connector configuration. I The connector incorporates modern in-line mating technology on a 5.0 mm centerline with no loss of spacing and a variety of keying possibilities. I Wiring faults eliminated through high automation. I Approvals: VDE: 4751-1431-4024 / A 10A and 4751-1431-4024 / A 9E UL E 28476 Vol. 9 Sec. 7;
97 ME 17936; AP-27HB
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connector Versions METRIC Dimensions are millimetres over inches Single Way Connectors Single Way connectors with insulation displacement contacts for use on tinned copper alloy tab 6.3 x 0.8 mm according to DIN 46244. Satellite Connectors 3 position connectors, pitch 5.0 mm, with short circuited insulation displacement contacts for harness shunts. Wire Size Range: 0.5–1.5 mm Current Rating: 16 Ampère max. acc. to wire size TAB Connectors 2–12 position 5.0 mm pitch connectors with insulation displacement contacts mateable with components according to RAST 5 and with tinned copper alloy tab 6.3 x 0.8 mm according to DIN 46244. Same Shape - Different Applications With the same outside shape four connector versions are available, which are to handle with the same application tooling. Wire Size Range: 0.5–1.5 mm2 Current Rating: 16 Ampere max. acc. to wire size -For LIF version up to
10 Ampere max
Wire Size Range: 0.5–1.5 mm Current Rating: 16 Ampere max. acc. to wire size Supply Status: In order to increase product- ivity these items are supplied in sticks. Wire Size Range: 0.5–0.75 mm Current Rating: 6 Ampere max. acc. to wire size PC Board: Single or both sides printed 5 µm tin over 35 µm copper PCB Connectors 2–12 position 5.0 mm pitch connectors with insulation displacement contacts accor- ding to printed circuit boards with thickness 1.5 ±0.2 mm and 5.0 mm pitch. LIF version 2 point contact instead of 4 as per standard version
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com TAB Connector METRIC Dimensions are millimetres over inches Rast 5 Centerline: 5.0 mm, according to RAST 5 specifications Configurations: 2- to 12-positions Housing Material: Plastic PA 6.6 Housing Colour: Natural colour for standard version Grey colour for LIF version Contact Material: Copper alloy, post-tinned 2.0 µm min. Polarisation, Keying, Locking Latches: according to RAST 5 specifications (see customer drawings) Track Resistance: as per IEC 112 (250 V) Glow Wire Test: as per IEC 695-2-1 (850 °C) and 750°C no flame Air and Creepage Distance: according to EN 60998-1 (IEC 998-1) for 380 V, ≥4.0 mm Voltage Resistance: according to EN 60998-1 (IEC 998-1) 1750 V for 4 minutes Insulation Resistance: according to EN 60998-1 (IEC 998-1) >5 M Ω Wire Size Range: from 0.5 to 1 .5 mm2 Current Rating: Standard Version 16 A max. according to wire size 0.5 mm 2 ≤3 A, 0.75 mm2 ≤6 A, 1.0 mm2 ≤10 A, 1 .5 mm2 ≤16 A LIF Version 10 A max. according to wire size 0.5 mm 2 ≤3 A, 0.75 mm2 ≤6 A, 1.0 mm2 ≤10 A, 1 .5 mm2 ≤10 A Rated Voltage: 380 Volts max. Wire Type: H05V-K (70 °C max.) or FR 3/2 (105 °C max.) for 0.5–1 .0 mm2 wires with copper or tinned stranded wires H07V-K (70 °C max.) or FR 3/2 (105 °C max.) for wires from 1 .5 mm2 with copper or tinned stranded wires Insulation Type: PVC suitable for temperatures up to 70 °C / 105 °C Insulation Diameter Range: 2.0–3.5 mm Temperature Range: –25 °C up to +105 °C Wire Extraction Force/Way: 50 N min. on wire size 0.5 mm Application Specification: 114-20016 Product Specification: Standard version: 108-20065 LIF version: 108-20215 Homologations: acc.to VDE File No. 3905 (to 16 A) and UL File No. E28476 (to 14 A) Technical Features AMP MONO-SHAPE TAB Connector
1 Cover closed after Wire
Insertion. Wire Direction 90°. 180° when locked in Cover Recess
2 Cavity Numbers
3 Polarisation
(Located on the Back Side)
4 Keying
6 Colour Marking
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Keying Plan METRIC Dimensions are millimetres over inches Keying Plan from Mating Direction,
2 Slanted Keying Rib
3 Keying Rib
4 Polarisation Rib
5 Cavity Number
2 Position RAST 5 Variations
(Variable Keying)* a – 1 – – 2 – c – 3 – – 4 – d – 5 – – 6 – b c – 7 – 5 4 1 2 3 RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 1-282002-2 2-282002-2 3-282002-2 6.500 3.500 28.500 1-284338-2 2-284338-2 — 1-282002-1 2-282002-1 2-282002-1 6.500 3.500 28.500 1-284338-1 2-284338-1 — 1-282002-3 2-282002-3 — 6.500 3.500 28.500 1-284338-3 2-284338-3 3-284338-3 1-282002-4 2-282002-4 — 6.500 3.500 — 1-284338-4 — — 1-282002-5 2-282002-5 — 6.500 3.500 — 1-282002-6 2-282002-6 — 6.500 3.500 — 1-282002-7 2-282002-7 3-282002-7 6.500 3.500 28.500 1-284338-7 — — ca – 1 – – 2 – bd c – 1 – a – 2 –d c – 1 – – 2 – db * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE TAB Connector METRIC Dimensions are millimetres over inches Rast 5
3 Position RAST 5 Variations
(Variable Keying)* 03-B 03-K Grey 03-B 03-K Red 03-D 03-F Green 03-B 03-K Blue 03-A 03-I Orange RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 1-282003-1 2-282003-1 3-282003-1 4.160 2.500 24.000 1-284339-1 2-284339-1 — 1-282003-2 2-282003-2 3-282003-2 4.160 2.500 24.000 1-284339-2 2-284339-2 — 1-282003-3 2-282003-3 — 4.160 2.500 — 1-284339-3 2-284339-3 — 282233-2 282233-2 — 4.160 2.500 — 1-282003-4 2-282003-4 — 4.160 2.500 — 1-284339-4 2-284339-4 — 1-282003-5 2-282003-5 — 4.160 2.500 — 1-284339-5 2-284339-5 — 1-282003-6 2-282003-6 — 4.160 2.500 — c b– 1 – d – 2 – c d – 3 – c d – 1 – c b– 2 – d b– 3 – c a – 1 – d – 2 – c d b– 3 – c a – 1 – – 2 – c d – 3 – c d – 1 – c b– 2 – d b– 3 – c d – 1 – c b– 2 – d b– 3 – c d – 1 – c b– 2 – d b– 3 – * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE TAB Connector METRIC Dimensions are millimetres over inches
4 Position RAST 5 Variations
(Variable Keying)*
5 Position RAST 5 Variations
(Variable Keying)* * Final keying version is produced on the Application Tooling Machines. 04-A Red 04-D Black 04-A Grey RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 1-282004-1 2-282004-1 3-282004-1 2.120 2.000 18.750 1-282004-2 2-282004-2 3-282004-2 2.120 2.000 18.750 1-282004-3 2-282004-3 — 2.120 2.000 — c b– 1 – d – 2 – c – 3 – d – 4 – c d – 1 – c – 2 – d b– 3 – c d – 4 – c b– 1 – d – 2 – c – 3 – d – 4 – Red Red RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 1-282005-1 2-282005-1 — 2.600 1.500 18.750 1-284545-1 — — 2.600 1.500 18.750 c – 1 –d c – 2 – – 3 –d c – 4 –d c – 5 –d b
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com METRIC Dimensions are millimetres over inches Rast 5 AMP MONO-SHAPE TAB Connector
6 Position RAST 5 Variations
(Variable Keying)* Red Violet RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 1-282006-1 2-282006-2 3-282006-2 2.080 1.200 13.500 1-282006-3 2-282006-3 3-282006-3 2.080 1.200 13.500
7 Position RAST 5 Variations
(Variable Keying)* Black RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 1-282007-1 2-282007-1 — 1.820 1.200 — 1-284397-1 — — 1.820 1.200 — c – 1 – b b – 6 –d c – 7 –d
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE TAB Connector METRIC Dimensions are millimetres over inches RAST 5 Version * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version * Final keying version is produced on the Application Tooling Machines. Bold Part Numbers are LIF Version
8 Position RAST 5 Variations
(Variable Keying)* Violet Suitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 284085-1 2-284085-1 — 1.560 900 — 1-284685-1 2-284685-1 — 284085-2 2-284085-2 — 1.560 900 — c – 1 –d c – 2 –d b c – 3 –d c – 4 –d b c – 5 –d c a – 6 –d b c – 7 –d c – 8 –d RAST 5 Version
10 Position RAST 5 Variations
(Variable Keying)* Suitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 1-282010-1 2-282010-1 — 1.300 700 — 1-284686-1 2-284686-1 — b c – 7 –d c a d
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP MONO-SHAPE Connectors in In-Line Mating Technology AMP MONO-SHAPE Single Way Connector Single Way Connector
1 All Single Way Connectors
are supplied in “stick-form” by 6 single ways each. They will be cut from the Application Tooling Machines
2 Cover closed after Wire
Insertion. Wire Direction 90°. 180° when locked in Cover Recess
3 Polarisation similar to the
5 Plastic Noses which Lock
Centerline: 5.0 mm, according to RAST 5 specifications Configurations: 1 position Housing Material: Plastic PA 6.6 Housing Colour: Natural colour Contact Material: Copper alloy, post-tinned 2.0 µm min. Polarisation, Keying, Locking Latches: according to RAST 5 specifications (see customer drawings) Track Resistance: as per IEC 112 (250 V) Glow Wire Test: as per IEC 695-2-1 (850 °C) and 750°C no flame Air and Creepage Distance: according to EN 60998-1 (IEC 998-1) for 380 V, ≥4.0 mm Voltage Resistance: according to EN 60998-1 (IEC 998-1) 1750 V for 4 minutes Insulation Resistance: according to EN 60998-1 (IEC 998-1) >5 M Ω Wire Size Range: from 0.5 to 1 .5 mm2 Current Rating: 16 A max. according to wire size 0.5 mm 2 ≤3 A, 0.75 mm2 ≤6 A, 1.0 mm2 ≤10 A, 1 .5 mm2 ≤16 A Rated Voltage: 380 Volts max. Wire Type: H05V-K (70 °C max.) or FR 3/2 (105 °C max.) for 0.5–1 .0 mm2 wires with copper or tinned stranded wires H07V-K (70 °C max.) or FR 3/2 (105 °C max.) for wires from 1.5mm2 with copper or tinned stranded wires Insulation Type: PVC suitable for temperatures up to 70 °C / 105 °C Insulation Diameter Range: 2.0–3.5 mm Temperature Range: –25 °C up to +105 °C Wire Extraction Force/Way: 50 N min. on wire size 0.5 mm Application Specification: 114-20017 Product Specification: 108-20066 Homologations: acc.to VDE File No. 3905 (to 16 A) and UL File No. E28476 (to 14 A) Counter Part: Tab 6.3 x 0.8 mm as per DIN 46244 norms Materials: Copper alloy Finishing: Tinned (6.0 µm max.) Technical Features METRIC Dimensions are millimetres over inches
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com ca – 1 –d AMP MONO-SHAPE Connectors in In-Line Mating Technology Keying Plan from Mating Direction Keying Plan
1 Keying Rib
2 Polarisation Rib
3 Cavity Number
1 Position
(Variable Keying)* METRIC Dimensions are millimetres over inches Black RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray On Reel Packaging Unit On Tray On Reel — 1-282086-1 1.024 10.500 — 1-282086-2 1.024 — c – 1 –d ca – 1 –d Orange — 1-282086-3 1.024 — c – 1 –db Green — 1-282086-4 1.024 — Blue — 1-282086-5 1.024 — Violet — 1-282086-6 1.024 —
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 4 3 AMP MONO-SHAPE Connectors in In-Line Mating Technology AMP MONO-SHAPE PCB (Printed Circuit Board) Connector PCB Connector
1 Cover closed after
Wire Insertion. Wire Direction 90°. 180° when locked in Cover Recess
3 Keying Slot in PC Board
4 Locking Hole in PC Board
5 Colour Marking
Centerline: 5.0 mm Configurations: 2-12 positions Housing Material: Plastic PA 6.6 Housing Colour: Natural colour Contact Material: Copper alloy, post-tinned 2.0 µm min. Polarisation, Keying, Locking Latches: according to RAST 5 specifications (see customer drawings) Track Resistance: as per IEC 112 (250 V) Glow Wire Test: as per IEC 695-2-1 (850 °C) and 750°C no flame Air and Creepage Distance: according to EN 60998-1 (IEC 998-1) for 240 V, ≥3.0 mm Voltage Resistance: according to EN 60998-1 (IEC 998-1) 1750 V for 4 minutes Insulation Resistance: according to EN 60998-1 (IEC 998-1) >5 M Ω Wire Size Range: from 0.5 to 0.75 mm2 Current Rating: 6 A max. according to wire size 0.5 mm 2 ≤3 A, 0.75 mm2 ≤6 A Rated Voltage: 220 Volts max. Wire Type: H05V-K (70 °C max.) or FR 3/2 (105 °C max.) for 0.5–1 .0 mm2 wires with copper or tinned stranded wires H07V-K (70 °C max.) or FR 3/2 (105 °C max.) for wires from 1.5mm2 with copper or tinned stranded wires Insulation Type: PVC suitable for temperatures up to 70 °C / 105 °C Insulation Diameter Range: 2.0–2.8 mm Temperature Range: –25 °C up to +105 °C Wire Extraction Force/Way: 50 N min. on wire size 0.5 mm Application Specification: 114-20025 Product Specification: 108-20067 Homologations: acc.to VDE File No. 3905 (to 6 A) and UL File No. E28476 (to 6 A) Printed Circuit Board: Thickness 1.5 ±0.2mm Tinned Circuit Paths: 5.0mm pitch and width of 1.8mm Technical Features METRIC Dimensions are millimetres over inches
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology AMP MONO-SHAPE PCB (Printed Circuit Board) Connector 15,0 14,0 23,0 5,0 11 2 4 1 Wire ExitPCB Connector
1 PC Board
2 First Circuit Path
3 MONO-SHAPE Connector
4 Wire
1 First circuit path
2 Slot for keying rib in front
of first cavity (according to the connector 4.0 mm or 7.4 mm)
3 Bore hole for locking clip
cavities (diameter 2.5 mm)
4 Slot for keying rib
Dimensions on request. See Customer Drawing 282042 METRIC Dimensions are millimetres over inches
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP MONO-SHAPE Connectors in In-Line Mating Technology AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Centerline 5.0 mm METRIC Dimensions are millimetres over inches PC Board Cut-OutNo. of Positions Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 1-282042-1 2-282042-1 — 5.980 3.500 — 1-282042-2 2-282042-2 3-282042-2 5.980 3.500 28.500 1-282042-3 2-282042-3 3-282042-3 5.980 3.500 28.500 1-282042-4 2-282042-4 — 5.980 3.500 — 1-282042-5 2-282042-5 3-282042-5 5.980 3.500 28.500 1-282043-2 2-282043-2 3-282043-2 4.160 2.500 24.000 1-282043-3 2-282043-3 — 4.160 2.500 — 282235-2 2-282235-2 — 4.160 2.500 — 282235-3 2-282235-3 — 4.160 2.500 — 1-282044-1 2-282044-1 3-282044-1 3.120 2.000 18.750
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology AMP MONO-SHAPE PCB (Printed Circuit Board) Connector METRIC Dimensions are millimetres over inches Green Centerline 5.0 mm (continued) PC Board Cut-OutNo. of Positions Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 1-282045-1 2-282045-1 3-282045-1 2.600 1.500 18.750 1-282045-2 2-282045-2 3-282045-2 2.600 1.500 18.750 1-282045-3 2-282045-3 3-282045-3 2.600 1.500 18.750 1-284733-1 2-284733-1 3-284733-1 2.600 1.500 18.750 1-282046-1 2-282046-1 3-282046-1 2.080 1.200 13.500 1-284734-1 2-284734-1 3-284734-1 2.080 1.200 13.500 1-282047-1 2-282047-1 3-282047-1 1.820 1.200 13.500 284208-1 2-284208-1 — 1.560 900 — 1-282049-1 2-282049-1 3-282049-1 1.300 700 10.500 1-282050-1 2-282050-1 3-282050-1 1.300 700 10.500
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE PCB (Printed Circuit Board) Connector METRIC Dimensions are millimetres over inches Rast 5 Black Centerline 5.0 mm (continued) PC Board Cut-OutNo. of Positions Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel 1-282051-1 2-282051-1 3-282051-1 1.040 700 10.500 1-282052-1 2-282052-1 3-282052-1 1.040 700 10.500
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE Connectors in In-Line Mating Technology AMP MONO-SHAPE Satellite Connector Satellite Connector Insertion. Wire Direction 90°. 180° when locked in Cover Recess
2 Bridge between Contacts
3 Cavity Numbers
4 For Satellite version, the
contact, other cavities are clogged Centerline: 5.0 mm, according to RAST 5 specifications Configurations: 3 positions only (for special version please contact Tyco Electronics) Housing Material: Plastic PA 6.6 Housing Colour: Natural colour Contact Material: Copper alloy, post-tinned 2.0 µm min. Polarisation, Keying, Locking Latches: according to RAST 5 specifications (see customer drawings) Track Resistance: as per IEC 112 (250 V) Glow Wire Test: as per IEC 695-2-1 (850 °C) and 750°C no flame Air and Creepage Distance: according to EN 60998-1 (IEC 998-1) for 380 V, ≥4.0 mm Voltage Resistance: according to EN 60998-1 (IEC 998-1) 1750 V for 4 minutes Insulation Resistance: according to EN 60998-1 (IEC 998-1) >5 M Ω Wire Size Range: from 0.5 to 1.5 mm2 Current Rating: 16 A max. according to wire size 0.5 mm 2 ≤3 A, 0.75 mm2 ≤6 A, 1.0 mm2 ≤10 A, 1 .5 mm2 ≤16 A Rated Voltage: 380 Volts max. Wire Type: H05V-K (70 °C max.) or FR 3/2 (105 °C max.) for 0.5–1 .0 mm2 wires with copper or tinned stranded wires H07V-K (70 °C max.) or FR 3/2 (105 °C max.) for wires from 1.5mm2 with copper or tinned stranded wires Insulation Type: PVC suitable for temperatures up to 70 °C / 105 °C Insulation Diameter Range: 2.0–3.5 mm Temperature Range: –25 °C up to +105 °C Wire Extraction Force/Way: 50 N min. on wire size 0.5 mm Application Specification: 114-20026 Product Specification: 108-20070 Homologations: acc.to VDE File No. 3905 (to 16 A) and UL File No. E28476 (to 14 A) Technical Features METRIC Dimensions are millimetres over inches
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 a – 1 – – 2 – c – 3 – – 4 – – 5 – – 6 – b c – 7 – 4 3 1 2 AMP MONO-SHAPE Connectors in In-Line Mating Technology Keying Plan from Mating Direction Keying Plan AMP MONO-SHAPE - 3 Position Satellite Connector (Variable Keying)* * Final keying version is produced on the Application Tooling Machines. METRIC Dimensions are millimetres over inches 03-A 03-I Black RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel c b– 1 – d – 2 – c d – 3 – AMP MONO-SHAPE - 2 Position Satellite Connector (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2 to have Short Circuit 02-L 02-P 02-L 02-P Orange 02-L 02-P Blue 02-L 02-P Green 02-L 02-P Violet 02-L 02-P Black 02-C 1-284288-1 284288-1 — 6.500 — — 1-284288-3 284288-3 — 6.500 3.000 — 1-284288-6 284288-6 — 6.500 3.000 — c – 1 – – 2 –db c – 1 – – 2 – db c – 1 – – 2 – db c – 1 – – 2 – db c – 1 – – 2 – db c – 1 – – 2 – db c – 1 – a – 2 –d
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Keying Plan from Mating Direction METRIC Dimensions are millimetres over inches * Final keying version is produced on the Application Tooling Machines. AMP MONO-SHAPE Bridge Connector - 3 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3 to have Short Circuit 03-A 03-I Green RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel c b– 1 – d – 2 – c d – 3 – AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3 to have Short Circuit Green RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2 and 3-4 to have Short Circuit Black RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel AMP MONO-SHAPE Bridge Connector - 6 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3-4-5-6 to have Short Circuit RAST 5 VersionSuitable for RAST 5 Version Colour Marking Part Numbers On Tray Loose Piece On Reel Packaging Unit On Reel Loose Piece On Reel
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Introduction METRIC Dimensions are millimetres over inches AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology MONO-SHAPE Mark II Connector System was developed according to the newest level of knowledge and standard. The requirements of advanced In-Line mating technology for the component and contact of printed circuit board (PCB) is granted by the two versions TAB and PCB connector systems. System is designed to maximise the full integration with the application tooling, assuring the flexibility in the harness design. This system is suitable for a wide wire size range of conductor and current carrying capacity up to 16 A. Double termination is possible with 0.5 and 0.5mm 2 or 0.5 and 0.75mm2 conductors. (See application spec. 114-20104 for details) The connectors are available in 1 to 10 positions (TAB Version) with interior locking device and 2 to 12 positions (PCB Version) Connectors are supplied in chain and provided with all keying and polarisation ribs the connectors can be handled automatically with a modern Application Tooling Equipment. Wiring faults checked and eliminated through high automation. Application Machines shall provide to print a colour code mark on the connectors cover after wire termination, feasible on all connectors configuration, for connector identification on harnesses. I Housing moulded in different materials for different
applications
I Standard, Part Numbers with pre-dash 0 (as 0-284471-1) Housing in unfilled PA 6/6, UL 94V-2 I For UL94V0, Part Numbers with pre-dash 1 (as 1-284471-1) Housing in unfilled PA 6/6, UL 94V-0 I High Operating Temperature (up to 130°), Part Numbers with pre-dash 2 (as 2- 284471-1) Unfilled PA 4/6, UL 94V-2 (available for TAB Version only) I Glow Wire 750° no flame, Part Numbers with pre-dash 3 (as 3-284471-1) Housing in unfilled PA 6, UL 94V-2 Technical Features
Connectors but with a bridge between two adjacent contacts to have a Short Circuit between them. Wire Size Range: 0.35–1.5 mm Current Rating: 16 Ampere max. acc. to wire size used Centerline: 5.0mm Housing Material: Polyamide, PA 6.6 and PA 6 Approvals: VDE, UL CSA applied Standard Colour: Natural 2032 AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Technical Data METRIC Dimensions are millimetres over inches TAB Connectors 1-10 position 5.0 pitch connectors with insulation displacement contacts mateable with components according to rast 5 and with tinned copper alloy tab contacts 6.3 x 0.8mm according to DIN 46244 and DIN 17670 Part 1. Current Voltage: 250 V~ Air and Creepage Distance: >3.2mm Flammability Rating: According UL 94 V-2 Wire Size Range: 0.35–0.75 mm2 Current Rating: 6 Ampere max. acc. to wire size used PC Board: Single or double side, with thickness 1.6 ±0.2mm, FR4, 2 x 0.35 µm Copper 5µm tinned tracks, 5.0mm pitch PCB Connectors 2–12 position 5.0 mm pitch connectors with insulation displacement contacts mateable with printed circuit boards (PCB)
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Keying Plan and Cable Exit METRIC Dimensions are millimetres over inches Rast 5 Keying Plan from Mating Direction, Fully Keyed Version
5 Motor Mount
(for TAB Version only)
8 Motor Mount
9 Colour Marking Area to
Keyed Version: 05-C This final keying version will be produced on the Application Tooling Equipment 2 1 3 9 6 7
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com TAB Connector System METRIC Dimensions are millimetres over inches AMP MONO-SHAPE MARK II TAB Connector System No. of Positions: 1 to 10 positions Contact Material: CuNi2Si Contact Finish: Tin Plated Current Rating:
16 A, up to 4 contacts 16 A
Insulation Diameter: 3.0mm max. Insulation Resistance: >10 MΩ Wire Size Range: 0.35-1.5mm2 Temperature Range: -40°C up to +130°C Product Specification: 108-20213 Application Specification: 114-20104 Violet Blue Blue No. of Positions Colour Marking as Shipped Part Numbers High Glow Wire Packaging Standard UL94V0 Temperature 750° no flame Unit 0-284471-1 1-284471-1 2-284471-1 3-284471-1 11000 0-284472-1 1-284472-1 2-284472-1 3-284472-1 5500 0-284473-1 1-284473-1 2-284473-1 3-284473-1 3520 0-284473-2 1-284473-2 2-284473-2 3-284473-2 3520 0-284474-1 1-284474-1 2-284474-1 3-284474-1 2640 0-284474-2 1-28444-2 2-284474-2 3-284474-2 2640 0-284475-1 1-284475-1 2-284475-1 3-284475-1 2200 0-284476-1 1-284476-1 2-284476-1 3-284476-1 1760 0-284476-4 1-284476-4 2-284476-4 3-284476-4 1760 0-284477-1 1-284477-1 2-284477-1 3-284477-1 1540 RAST 5 Version
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com TAB Connector System (continued) METRIC Dimensions are millimetres over inches Rast 5 AMP MONO-SHAPE MARK II TAB Connector System Blue Red Blue RAST 5 Version No. of Positions Colour Marking as Shipped Part Numbers High Glow Wire Packaging Standard UL94V0 Temperature 750° no flame Unit 0-284477-2 1-284477-2 2-284477-2 3-284477-2 1540 0-284477-3 1-284477-3 2-284477-3 3-284477-3 1540 0-284478-1 1-284478-1 2-284478-1 3-284478-1 1320 0-284478-2 1-284478-2 2-284478-2 3-284478-2 1320 0-284480-1 1-284480-1 2-284480-1 3-284480-1 1100
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com TAB-BRIDGE Connector System - Short Circuit METRIC Dimensions are millimetres over inches Blue Red Blue Red Blue RAST 5 Version No. of Positions Colour Marking as Shipped Bridge Part Numbers Between High Glow Wire PackagingCavity Standard UL94V0 Temperature 750° no flame UnitNumbers 1-2 0-284472-2 1-284472-2 2-284472-2 3-284472-2 5500 1-2 0-284473-3 1-284473-3 2-284473-3 3-284473-3 3520 1-2-3 0-284476-2 1-284476-2 2-284476-2 3-284476-2 1760 1-2 0-284476-3 1-284476-3 2-284476-3 3-284476-3 1760 7-8 0-284480-2 1-284480-2 2-284480-2 3-284480-2 1100 AMP MONO-SHAPE MARK II TAB-BRIDGE Connector System - Short Circuit
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com METRIC Dimensions are millimetres over inches Rast 5 PCB Connector System AMP MONO-SHAPE MARK II PCB Connector System No. of Positions: 2 to 12 positions Contact Material: Brass Contact Finish: Tin Plated Current Rating: 6 A max. Insulation Diameter: 2.8mm max. Insulation Resistance: >10 MΩ Wire Size Range: 0.35-0.75mm2 Temperature Range: -40°C up to +105°C Product Specification: 108-20214 Application Specification: 114-20104 Notes Concerning the PC Board Layout See also Customer Drawing 284482 and Drawing 93-330805-2 for Test PCB Layout
1 First circuit path, mate with
Connector way No. 1
2 Slot for connector keying rib
Adjacent to first and/or last way Based on connector design, for 3.5mm or 7.5mm length
3 Hole for locking clip,
(diameter 2.5)
4 Slot for connector keying rib
ways. Position based on connector design, for 7.5mm length wire exit 2 1 4
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com PCB Connector System (continued) METRIC Dimensions are millimetres over inches Orange AMP MONO-SHAPE MARK II PCB Connector System Violet Black Green Red Grey Orange Violet Black Green No. of Positions Colour Marking as Shipped Part Numbers Glow Wire Packaging Standard UL94V0 750° no flame Unit 0-284482-1 1-284482-1 3-284482-1 5500 0-284482-2 1-284482-2 3-284482-2 5500 0-284482-3 1-284482-3 3-284482-3 5500 0-284482-4 1-284482-4 3-284482-4 5500 0-284482-5 1-284482-5 3-284482-5 5500 0-28482-6 1-284482-6 3-284482-6 5500 0-284483-1 1-284483-1 3-284483-1 3520 0-284483-2 1-284483-2 3-284483-2 3520 0-284483-3 1-284483-3 3-284483-3 3520 0-284483-4 1-284483-4 3-284483-4 3520 0-284484-1 1-284484-1 3-284484-1 2640 RAST 5 Version
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology PCB Connector System (continued) METRIC Dimensions are millimetres over inches Grey Orange AMP MONO-SHAPE MARK II PCB Connector System Violet Black Green Orange Violet Black Green Violet Black No. of Positions Colour Marking as Shipped Part Numbers Glow Wire Packaging Standard UL94V0 750° no flame Unit 0-284484-2 1-284484-2 3-284484-2 2640 0-284484-3 1-284484-3 3-284484-3 2640 0-284485-1 1-284485-1 3-284485-1 2200 0-284485-2 1-284485-2 3-284485-2 2200 0-284485-3 1-284485-3 3-284485-3 2200 0-28485-4 1-284485-4 3-284485-4 2200 0-284486-1 1-284486-1 3-284486-1 1760 0-284486-2 1-284486-2 3-284486-2 1760 0-284486-3 1-284486-3 3-284486-3 1760 0-284486-4 1-284486-4 3-284486-4 1760 0-284486-5 1-284486-5 3-284486-5 1760 RAST 5 Version
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology PCB Connector System (continued) METRIC Dimensions are millimetres over inches Orange Violet AMP MONO-SHAPE MARK II PCB Connector System Black Green Orange Violet Black Green Violet Black Green No. of Positions Colour Marking as Shipped Part Numbers Glow Wire Packaging Standard UL94V0 750° no flame Unit 0-284487-1 1-284487-1 3-284487-1 1540 0-284487-2 1-284487-2 3-284487-2 1540 0-284487-3 1-284487-3 3-284487-3 1540 0-284488-1 1-284488-1 3-284488-1 1320 0-284488-2 1-284488-2 3-284488-2 1320 0-28488-3 1-284488-3 3-284488-3 1320 0-284488-4 1-284488-4 3-284488-4 1320 0-284489-1 1-284489-1 3-284489-1 1100 0-284489-2 1-284489-2 3-284489-2 1100 0-284489-3 1-284489-3 3-284489-3 1100 0-284489-4 1-284489-4 3-284489-4 1100 RAST 5 Version
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology PCB Connector System (continued) METRIC Dimensions are millimetres over inches AMP MONO-SHAPE MARK II PCB Connector System Violet Black Green Violet Black Green Black Green No. of Positions Colour Marking as Shipped Part Numbers Glow Wire Packaging Standard UL94V0 750° no flame Unit 0-284490-1 1-284490-1 3-284490-1 1100 0-284490-2 1-284490-2 3-284490-2 1100 0-284491-1 1-284491-1 3-284491-1 880 0-284491-2 1-284491-2 3-284491-2 880 0-284491-3 1-284491-3 3-284491-3 880 0-28492-1 1-284492-1 3-284492-1 880 0-284492-2 1-284492-2 3-284492-2 880 0-284492-3 1-284492-3 3-284492-3 880 RAST 5 Version
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology Application Tooling Entry Level Semi-Automatic IDC Bench Machines SIM 500P Part No. 528376-2 SIM 500T Part No. 528377-2 In the Entry Level concept, the application process is shared by two different semi-automatic machines. The SIM 500P prepares the AMP multifitting Mark II bando- liered IDC connectors. The machine removes the connector from the chain and cuts the keying ribs. Next, the prepared IDC connectors are applied by the SIM 500T. To facilitate this, the individual IDC connectors are loaded into a nest and moved automatically into the termination station. The manually inserted wires are, according to a program, terminated into the appropriate insulation displacement slots. The cover is then separated from the housing, turned and pushed into final position. The nest, including the finished harness module, is removed from the easily accessed track. I Processing of all versions of the AMP multifitting Mark II connector system with only minor set up changes. I Cutting and reliable removal of the reel clips. I Cutting and reliable removal of the coding and polarisation ribs by means of a preset cutting block. I Nest capacity per machine cycle – one connector 4- to 8-pos. – two connectors 2- and 3-pos. – four connectors 1-position I Integrated monitoring of the connector supply. I Simple operator interface. Power Supply:
230 V AC, 50 Hz
Air Pressure: 6 bar Cycle Time: approx. 4 s / connector package (without handling time) I Application of all versions of the AMP multifitting Mark II connector, with only minor set up changes. I Termination of the wire with active support of the IDC contact. I Termination of two wires (double wire termination) programmable. I Connector fixture, incorporating three nests for max. 12 positions each. I Accessible and easily interchangeable mechanical program rail. I By utilising several connector fixtures and program rails, output and set up times can be optimised. I Simple operator interface. Power Supply: Air Pressure: 6 bar Cycle Time: approx. 1 .2 s / line (without handling time) Technical Features Technical Data Technical Features Technical Data SIM 500P SIM 500T METRIC Dimensions are millimetres over inches
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology Application Tooling (continued) Processing Modules of the SIM 50 IDC Workstation – SIM 50 This semi-automatic machine was designed for the sequential processing of AMP multifitting Mark II IDC connector system and its variations such as direct and indirect mating connector with interior or exterior locking. A processing sequence can consist of one or more IDC con- nectors of the same or different numbers of positions, but a maximum total of 12 positions. The specific key coding of the connectors is performed during the termination process by an integrated cutting device. The wires are manually fed into the machine and then automatically terminated. Integrated control tests ensure a high quality product. I Processing of all versions of the AMP multifitting Mark II connector system without additional set up time. I Termination of the wire with active support of the IDC contact. I Termination of two wires in the same slot is programmable. I Colour coding on the connector cover possible. I Wire exit angle can be bent 180°. I Short set up and change- over times. I High output. I Correct wire insertion length and key codings are continually checked. I Good / bad sorter; faulty connections will be destroyed. I 50 different production programs can be stored. I Operator PC interface displaying machine status and production data; different languages available. I Low maintenance costs and the capability of off-site troubleshooting via modem. I Ergonomic and easy to oper- ate through a Touch Screen Display. Power Supply: Air Pressure: 6 bar Wire Size Range: 0.35 mm 2 up to 1 .5 mm2 Insulation Diameter Range: 1 .2 mm up to 3.0 mm Wire Type: Stranded conductors Technical Features Technical Data METRIC Dimensions are millimetres over inches
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology Application Tooling (continued) Flexible Harness Maker – FHM The FHM is a fully-automatic machine featuring modular set up. It is built to manufacture harnesses by processing both IDC connectors and crimp terminals. The basic machine includes a 12 wire selector, a station that cuts the wires to length, a stripping station, a double- crimp unit, two crimping presses and wire end ejector for doubling and daisy chains. A gripper unit takes the wire from the base machine and transfers it to the attached IDC station. Sequential processing allows the manufacturing of cross-overs and bridges as well as double-crimps, depending on the type of IDC connector used. The IDC workstations are easily reconfigured for processing our different IDC connector systems. They include all the necessary processing operations for IDC termination with minimum change-over and set up times. Quality checks integrated in the manufacturing process ensure the highest quality harness for every production run. I Manufacturing of harnesses with 2.5 mm pitch IDC con- nectors and/or 5.0 mm pitch IDC connectors and/or with crimp terminals. I IDC Workstations are available for the following connector systems: G AMP DUOPLUG 2.5 G AMP DUOPLUG 2.5 Mark II G AMP DUOPLUG Power G AMP multifitting Mark II G AMP MONO-SHAPE Mark II I The IDC Workstations can also be used as separate semi-automatic machines with manual wire transfer. I The specific key coding of the IDC connector is done on the IDC Workstation. I Integrated test equipment checks the coding and the insertion depth of the wire, and performs a continuity test. A spark testing unit is also available as an option. I Wire printing and single housing insertion possible. I Operator PC interface displays machine status and production data; different languages available. I Low maintenance costs and the capability of off-site troubleshooting via modem. I Ergonomic and easy to operate through a Touch Screen Display. Power Supply:
400 V AC, 50 Hz
Air Pressure: 6 bar Wire Size Range: 0.22 mm2 up to 1 .5 mm2 Wire Length: 220 mm up to 2,500 mm Insulation Diameter Range: 1 .2 mm up to 3.0 mm Wire Type: Stranded conductors Technical Features Technical Data METRIC Dimensions are millimetres over inches
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology Application Tooling (continued) IDC Harness Maker – IHM Mark III The new IHM Mark III is a very high performance, fully- automatic machine designed to manufacture parallel jumper harnesses using IDC tech- nology. The simultaneous feeding of up to 21 wires guarantees high productivity and flexibility and a choice of 2.5 mm or 5.0 mm pitch IDC systems. The gripper unit on the left side of the machine is able to spread the wires in both directions to enable the production of har- nesses using both 2.5 mm and 5.0 mm pitch connectors at the same time. Available options are a stripper crimper unit with an integrated crimp force analyser and a good/bad sorting unit. The IDC workstations are easily reconfigured for processing our different IDC connector systems. They include all the necessary processing operations for IDC termination with minimum change-over and set up times. Quality checks integrated in the manufacturing process ensure the highest quality harness for every production run. I Manufacturing of harnesses using 2.5 mm and/or 5.0 mm pitch IDC systems. I Very short wire length is possible. I Option available to produce harnesses with crimp terminals on one side. I IDC Workstations are available for the following connector systems: G AMP DUOPLUG 2.5 G AMP DUOPLUG 2.5 Mark II G AMP DUOPLUG Power G AMP multifitting Mark II G AMP MONO-SHAPE Mark II G AMP MT Edge I The specific key coding of the IDC connector is done on the IDC Workstation. I Integrated test equipment checks the coding and the insertion depth of the wire, and performs a continuity test. A spark testing unit is also available as an option. I Operator PC interface displays machine status and production data; different languages available. I Low maintenance costs and the capability of off-site troubleshooting via modem. I Ergonomic and easy to operate through a Touch Screen Display. Power Supply: Air Pressure: 6 bar Wire Size Range: 0.22 mm2 up to 1 .5 mm2 Wire Length: 125 mm up to 2,200 mm Insulation Diameter Range: 1 .2 mm up to 3.0 mm Wire Type: Stranded conductors Technical Features Technical Data METRIC Dimensions are millimetres over inches
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Introduction Centerline: 5.0 mm Available Number of Positions: 2- to 12-positions Housing Material: Polyamide PA 6.6 Contact Material: CuSn, CuFe Contact Finish: Tin Plated, Silver Plated Wire Size Range: from 0.5 to 2.5mm2 Wire Size Diameter: from 2.0 to 3.3mm Temperature Range: -40°C to +110°C Current Voltage: 220 V~ Current Rating: max. 16 A Standard Timer: 6 A Power Timer: 16 A Mating Force Contact: ≤ 15 N Unmating Force: ≤ 8 N Air and Creepage Distance: ≥ 3.0mm Track Resistance: PTI 250 Glow Wire Test: 850°C Contacts made for Tabs according:- DIN 46244 DIN 46343 Part 2 and 3 Technical Features AMP Standard Timer Connectors in In-Line Mating Technology AMP Standard Timer connectors according to RAST 5.0 mm standard have been developed to connect RAST 5 components (like motors, leach pumps, water level regulators, relays and push-button switches) in the Household Appliances Industry. They meet industry requirements, for example multiple position connectors, secure connection even at inclining mating as well as a sturdy contact design. AMP Standard Power Timer contacts, for use with Standard Timer housings, are suitable for high density and high current capacity up to 16 A. Housing is designed for end-to-end stacking without contact loss. They are available in different keying and locking versions from 2- positions to 12-positions. Standard Timer contacts can be used with stranded wires from 0.5 mm 2 to 2.5 mm2 and can be double terminated. Of course, the corresponding tooling is available, too. AMP Standard Timer connectors are tested by VDE and fulfil all requirements acc. to VDE 0700 (air gap, creepage distance, glow wire test, ball pressure test, creepage current strength). UL recognised component.
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 Interior and Exterior Locking Exterior Locking Connection to the Components according RAST 5 Standard
1 Connected Timer Contact
2 Standard Timer Housing
3 Keying
4 Polarisation
5 Locking Latch
6 RAST 5 Tab Array
Connection to the Components according RAST 5 Standard
6 Cover (Secondary Locking)
7 RAST 5 Tab Array
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Keying Plan and Housings Keying Plan from Mating Direction
3 Keying Rib between Cavity
4 Slanted Keying Rib
5 Polarisation Rib
6 Cavity Number
a – 1 – – 2 – c – 3 – – 4 – d – 5 – – 6 – b c – 7 – 6 5 1 2 AMP Standard Timer Housings RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit 02-A Natural 928344-2 6-928247-2 2.500 / 2.500 c – 1 – b a – 2 –d 02-B Black 2-928344-2 0-928247-2 2.500 / 3.000 ca – 1 – – 2 – b 02-C Grey 3-964951-2 8-928247-2 2.500 / 2.500 c – 1 – a – 2 –d 02-D Blue — 0-964983-2 2.500 ca – 1 – b – 2 – 02-E Green 6-928344-2 5-928247-2 2.500 / 2.500 a – 1 – – 2 – db 02-G Violet 5-928344-2 2-964983-2 2.500 / 2.500 – 1 – b a – 2 –db 02-H Brown 3-928344-2 — 2.500 a – 1 – b – 2 –db 02-I Orange 2-964951-2 3-928247-2 2.500 / 2.500 c – 1 – b – 2 – b Bold Part Numbers are Preferred Types
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 Housings AMP Standard Timer Housings
2 Position Rast 5 Variations (continued)
RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit 02-K Yellow-Green — 4-928247-2 2.500 ca – 1 – a – 2 – 02-L Natural 0-928343-2 — 3.000 – 1 – – 2 – b AMP Standard Timer Housings
2 Position Special Variations
with Interior Locking with Exterior Locking Unit Natural 7-927740-2 9-928247-2 5.000 – 1 – – 2 – Natural 0-964768-1 — 5.000 – 1 – – 2 – b 02-M Ultramarine-Blue — 3-964983-2 2.500 ca – 1 – – 2 – d 02-O Pink 0-964951-2 2-928247-2 2.500 / 2.500 c – 1 – b a – 2 – 02-P Purple — 7-928247-2 2.500 c – 1 – – 2 –db 02-Q Turquoise 4-928344-2 — 2.500 c – 1 – b – 2 –d Bold Part Numbers are Preferred Types
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Housings AMP Standard Timer Housings RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit 03-A Natural c – 1 – b – 2 –d – 3 – 03-B Black — 0-964983-3 2.500 – 1 –d c – 2 – b – 3 – b 03-D Blue — 3-928247-3 2.500 a – 1 – – 2 – c – 3 – 03-G Violet — 2-928247-3 2.500 ca – 1 – – 2 – a – 3 – 03-H Brown — 4-928247-3 2.500 – 1 – – 2 – db – 3 – 03-K Yellow-Green — 2-964983-3 2.500 c – 1 – – 2 – – 3 –db Bold Part Numbers are Preferred Types
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 Housings AMP Standard Timer Housings
3 Position Special Variations
with Interior Locking with Exterior Locking Unit Natural 0--928343-3 — 3.000 a – 1 – – 2 – – 3 – Black 02-928343-3 — 3.000 – 1 – – 2 – b – 3 – Grey 3-928343-3 — 3.000 – 1 – – 2 – a – 3 – Yellow — 0-928247-3 2.000 – 1 –d – 2 – – 3 –db Grey 2-928344-3 — 2.500 c – 1 – a – 2 – – 3 – Natural — 5-928247-3 2.500 – 1 – – 2 – – 3 – Bold Part Numbers are Preferred Types
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Housings AMP Standard Timer Housings RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit 04-A Natural 928344-4 4-928247-4 2.000 / 1.250 – 1 – b – 2 – c – 3 – – 4 –d 04-B Black — 5-928247-4 1.250 ca – 1 – – 2 – – 3 – – 4 – b 04-C Grey 3-928344-4 0-928247-4 2.000 / 1.250 a – 1 – – 2 – – 3 – – 4 – db 04-F White — 2-928247-4 1.250 a – 1 – – 2 – a – 3 – – 4 – d 03-G Violet — 3-928247-4 1.250 – 1 – a – 2 –d – 3 – – 4 – b AMP Standard Timer Housings
4 Position Special Variations
with Interior Locking with Exterior Locking Unit Natural 0--928343-4 — 2.500 – 1 – – 2 – – 3 – b – 4 – Black 02-928343-4 — 2.500 – 1 – – 2 – – 3 – a – 4 – Black 3-928344-4 — 2.500 – 1 – – 2 – d – 3 – – 4 – Bold Part Numbers are Preferred Types
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP Standard Timer Connectors in In-Line Mating Technology Housings AMP Standard Timer Housings RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit 05-B Black – 1 – – 2 –db – 3 – – 4 – – 5 – 05-D Blue — 3-928247-5 1.000 a – 1 – – 2 – – 3 –d a – 4 – – 5 – AMP Standard Timer Housings
5 Position Special Variations
with Interior Locking with Exterior Locking Unit Natural 0--928343-5 — 1.000 a – 1 – – 2 – – 3 – – 4 – – 5 – b Black 02-928343-5 — 1.000 – 1 – – 2 – – 3 – – 4 – – 5 – b Green — 5-928247-5 1.250 – 1 – – 2 – db – 3 – – 4 – – 5 –d Yellow — 4-928247-5 1.250 – 1 – – 2 – – 3 – b – 4 – c – 5 –d Natural — 6-928247-5 1.250 c – 1 – a – 2 – – 3 – – 4 – – 5 –d Bold Part Numbers are Preferred Types — 2-928247-5 1.000
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Housings AMP Standard Timer Housings RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit 06-A Natural — 964983-6 2.500 – 1 – b – 2 – c – 3 – – 4 – – 5 – – 6 – d 06-C Grey — 928247-6 1.000 – 1 – b – 2 – – 3 – c – 4 – – 5 – a – 6 – 06-D Blue — 2-928247-6 1.000 – 1 – – 2 – b – 3 – – 4 – d – 5 – – 6 – b 06-E Green — 3-928247-6 1.000 a – 1 – – 2 – – 3 – – 4 – d – 5 – – 6 – b Bold Part Numbers are Preferred Types
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP Standard Timer Connectors in In-Line Mating Technology Housings AMP Standard Timer Housings
6 Position Special Variations
with Interior Locking with Exterior Locking Unit Natural 928343-6 — 1.000 – 1 – – 2 – – 3 – – 4 – – 5 – – 6 – b Black 2-928343-6 — 1.000 – 1 – b – 2 – – 3 – – 4 – – 5 – – 6 – Natural 928151-6 — 1.500 – 1 – – 2 – c – 3 – – 4 – d – 5 – – 6 – Beige — 7-928247-6 1.000 – 1 – – 2 – c – 3 – – 4 – – 5 – – 6 – b Yellow — 4-928247-6 1.000 – 1 – b – 2 – c – 3 – – 4 – – 5 – a – 6 – Brown — 5-928247-6 1.000 – 1 – – 2 – c – 3 – – 4 – – 5 – – 6 – Natural — 6-928247-6 1.000 – 1 – b – 2 – – 3 – c – 4 – d – 5 – – 6 – Natural 2-928344-6 — 1.500 – 1 – b – 2 – – 3 – c – 4 –d – 5 – – 6 – Green 3-928344-6 — 1.500 a – 1 – – 2 – b c – 3 – c – 4 – d – 5 – – 6 – b Bold Part Numbers are Preferred Types
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Housings AMP Standard Timer Housings RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit 07-A/S Natural – 1 – – 2 – c – 3 – – 4 – d – 5 – – 6 – c – 7 – 07-C Grey — 928247-7 700 – 1 – – 2 – – 3 –d – 4 – – 5 – b – 6 – – 7 –d Bold Part Numbers are Preferred Types 928151-7 — 1.300 AMP Standard Timer Housings
7 Position Special Variations
with Interior Locking with Exterior Locking Unit Natural 928343-7 — 500 – 1 – – 2 – – 3 – – 4 – – 5 – – 6 – – 7 – Black 2-928343-7 — 500 – 1 – – 2 – – 3 – – 4 – – 5 – – 6 – b – 7 – Natural 928344-7 — 500 a – 1 – – 2 – c – 3 – – 4 – d – 5 – – 6 – b c – 7 – Blue — 2-928247-7 800 – 1 – a – 2 – – 3 – – 4 – – 5 – b – 6 – – 7 –d 2-928151-7 4-928247-7 1.300 / 1.000 Green Natural – 1 – – 2 – db – 3 – – 4 – – 5 – – 6 – c – 7 – Natural — 5-928247-7 1.000 – 1 – – 2 – d – 3 – b – 4 – – 5 – – 6 – – 7 –db Natural — 6-928247-7 1.000 – 1 – a – 2 – – 3 – – 4 – – 5 – – 6 – d c – 7 –
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP Standard Timer Connectors in In-Line Mating Technology Housings AMP Standard Timer Housings RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit 08-D Blue — 928247-8 800 Bold Part Numbers are Preferred Types AMP Standard Timer Housings
8 Position Special Variations
with Interior Locking with Exterior Locking Unit Natural 928343-8 — 1.000 Black 2-928343-8 — 1.000 Grey 3-928343-8 — 1.000 b Natural — 2-928247-7 800 a
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com AMP Standard Timer Connectors in In-Line Mating Technology Housings AMP Standard Timer Housings
9 Position Rast 5 Variations
RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit 09-D Blue — 2-928247-9 600 – 1 – – 2 – – 3 –d – 4 – – 5 – b – 6 – – 7 –d – 8 – – 9 – Bold Part Numbers are Preferred Types AMP Standard Timer Housings
9 Position Special Variations
with Interior Locking with Exterior Locking Unit Natural 927740-9 — 1.000 – 1 – b – 2 – – 3 – – 4 – – 5 – – 6 – – 7 – – 8 – – 9 – Natural 928151-9 — 1.000 – 1 – b – 2 – c – 3 – – 4 – – 5 – – 6 – – 7 – – 8 – – 9 – b Yellow — 928247-9 500 – 1 – c – 2 – – 3 – – 4 – a – 5 – – 6 – – 7 – – 8 –d – 9 – Brown — 3-928247-9 600 – 1 – – 2 – – 3 – b – 4 – – 5 – c – 6 – – 7 – a – 8 – – 9 –
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Rast 5 AMP Standard Timer Connectors in In-Line Mating Technology Housings AMP Standard Timer Housings
10 Position Special Variations
RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit Brown — 1-928247-0 1.400 – 1 – b Grey — 2-928247-0 500 a –1 0 AMP Standard Timer Housings
11 Position Rast 5 Variations
RAST 5 VersionKeying Version Colour Part Numbers Packaging with Interior Locking with Exterior Locking Unit 11-B Black 1-928247-1 1.000 Yellow– 1 – b –1 1– b AMP Standard Timer Housings
11 Position Special Variations
with Interior Locking with Exterior Locking Unit Natural 1-927740-1 — 800 – 1 – b –1 1– b AMP Standard Timer Housings
12 Position Special Variations
with Interior Locking with Exterior Locking Unit Natural 1-927740-2 — 700 b – 9 ––1 0 –1 1––1 2 Blue — 2-928247-1 1.000 – 1 – b –1 1– b Bold Part Numbers are Preferred Types
Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com I/A t/ºC0 2 04 06 08 01 0 0 1 2 0 Derating Curve AMP Standard Timer Connectors in In-Line Mating Technology Standard Timer Connector and Contacts Technical Data Material: Brass, Tin Plated Mating Part:
6.3 Tab
Wire: FLK 0.5/0.75 and 1.5mm2 Current Carrying Capacity to 6A: 1 = Wire 0.50mm 2, 11pos. housing 2 = Wire 0.75mm 2, 11pos. housing 3 = Wire 0.50mm 2, 2pos. housing 4 = Wire 0.75mm 2, 2pos. housing Current Carrying Capacity to 16A: 5 = Wire 1.50mm 2, 11pos. housing 6 = Wire 1.50mm 2, 2pos. housing Wire Size Range (mm2) Insulation Diameter Range (mm) Material Finish Part Number Packaging Unit Standard Timer Contacts with One Locking Lance Wire Size Range (mm2) Insulation Diameter Range (mm) Material Finish Part Number Packaging Unit Standard Timer Contacts with Two Locking Lances Wire Size Range (mm2) Insulation Diameter Range (mm) Material Finish Part Number Packaging Unit Standard Power Timer Standard Power Timer Standard Timer 123 4 Current Rating Ambient Temperature Bold Part Numbers are Preferred Types
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Engineering Notes Rast 5
Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Products for Industrial & Commercial Applications Specifications subject to change. www.tycoelectronics.com Engineering Notes