1500202 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

■2 cable entries (axial, radial) ■Smooth barrel, Ø 40 mm ■Plastic, ABS ■Large monitoring range of 60 to 3000 1/min ■Fixed start-up time delay 5 s ■Switchpoint adjustable via potentiometer ■Factor 1 for all metals ■Resistant to magnetic fields ■DC 3-wire, 10…65 VDC ■NO contact, PNP output ■Terminal chamber Wiring diagram Functional principle The rotational speed is detected by periodic damping of the integrated inductive sensor. This can be accomplished via metal targets or teeth on the monitored shaft. The pulse sequence generated is compared to an adjustable reference value in a comparator circuit If the rotational speed is below the reference value, the output is switched off (0). If the reference value is exceeded, the output is switched on (1). The start-up time delay (AÜ) is triggered by applying voltage to the device and closes the output for 5 s (start-up time of the drive).

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|3 DNI30U-K40SR-AP4X2 | 11/07/2023 13-02 | technical changes reserved Technical data Mechanical data Design Smooth barrel, 40 mm Dimensions 90 mm Housing material Plastic, ABS, Yellow Active area material Plastic, ABS, yellow Electrical connection Terminal chamber Clamping ability ≤ 2.5 mm² Environmental conditions Ambient temperature -30…+85 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 Power-on indication LED, Green Switching state LED, Yellow Included in delivery BS40, cable gland, blanking plug Mounting instructions Mounting instructions/Description Distance D 3 x B Distance W 3 x Sn Distance T 3 x B Distance S 1.5 x B Distance G 6 x Sn Distance N 2 x Sn Diameter active area B Ø 40 mm

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|3 DNI30U-K40SR-AP4X2 | 11/07/2023 13-02 | technical changes reserved Accessories BS 40 69466 Fixing clamp; material mounting block: PBT