14X26-SZLB-XXX-0LC 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Interconnect Solutions http://www.3M.com/interconnects/ 3MMini D Ribbon (MDR) Cable Assembly .050″High Speed Digital Data Transmission System — 26 Position 14X26-SZLB-XXX-0LC TS-1001-02 Sheet 1 of 3 S Supports new Industrial CameraLink in Automated Imaging Association for camera to frame grabber communications S 11shielded twin-ax pairs and four drain wires S Entire cable bundle is shielded with foil and braid for additional signal protection S Rugged MDR ribbon type contact S Rugged thumbscrew retention S EMI shielded junction shell in either plastic or overmolded construction. Date Modified: May 30, 2003 Physical Connector Contact Plating Wiping Area: 30µ″ [0 . 7 6µm]M i n .G o l d Shell Options Color: Parchment/Beige Material: Overmold Option: Polyvinyl Chloride (PVC) Shell Kit Option: Polyester Elastomer Cable Color: Parchment/Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Electrical Voltage Rating: 30 V Current Rating: 1A Insulation Resistance: >1 × 108Ω at @100 Vdc Withstanding Voltage: 350 Vrms for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100±10Ω Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft [4.1 ns/m ] Skew (within pair): 50 ps/meter maximum Skew (channel skew per chipset): 50 ps/meter maximum Environmental Temperature Rating: -- 2 0°Ct o+ 7 5°C CameraLink is a trademark of the Automated Imaging Association. UL File No.: E86982

3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Interconnect Solutions http://www.3M.com/interconnects/ 3MMini D Ribbon (MDR) Cable Assembly .050″High Speed Digital Data Transmission System — 26 Position 14X26-SZLB-XXX-0LC Shell option (See ordering information) B C Thumbscrew overmold shell 1.58 [ 40.2 ] .55 [ 14.0 ] Thumbscrew shell kit 1.55 [ 39.4 ] .51 [ 12.8 ] TS-1001-02 Sheet 2 of 3

Ordering Information

26 Position

(MDR) Male Plug 14X26-SZLB-XXX-0LC Length see Dim A 100 = 1 meter 200 = 2 meters 300 = 3 meters 450 = 4.5 meters 500 = 5 meters 700 = 7 meters A00 = 10 meters Cable ( See pinout for cable construction ) A 1 23 14 15 16 11 12 13 24 25 26 Generic EndDetail MDR 26 PositionPlug ( Both Ends ) r 4 56 17 18 19 7 89 20 21 22 (MDR) Male Plug Thumbscrews Thumbscrews B C Shell Retention Options: B = Thumbscrew shell kit T = Thumbscrew overmold shell Note: Use 3341-31 jacksocket for mounting receptacle to panel.

3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Interconnect Solutions http://www.3M.com/interconnects/ 3MMini D Ribbon (MDR) Cable Assembly .050″High Speed Digital Data Transmission System — 26 Position 14X26-SZLB-XXX-0LC Cable Assembly and Camera Link Pinouts* 3M Cable v 51.2 *Cable assembly compatible with both Camera Link configurations Medium and Full Configurations Base Configuration Two Channel Link Chips One Channel Link Chip + Camera Control + Serial Communication Camera Connector Right Angle Frame Grabber Channel Link Signal Cable Name (Reference only) Camera Connector Right Angle Frame Grabber Channel Link Signal 1 1 inner shield inner shield 1 1 inner shield 14 14 inner shield inner shield 14 14 inner shield 2 25 Y0- Pair 1- 2 25 X0- 15 12 Y0+ Pair 1+ 15 12 X0+ 3 24 Y1- Pair 2- 3 24 X1- 16 11 Y1+ Pair 2+ 16 11 X1+ 4 23 Y2- Pair 3- 4 23 X2- 17 10 Y2+ Pair 3+ 17 10 X2+ 5 22 Yclk- Pair 4- 5 22 Xclk- 18 9 Yclk+ Pair 4+ 18 9 Xclk+ 6 21 Y3- Pair 5- 6 21 X3- 19 8 Y3+ Pair 5+ 19 8 X3+ 7 20 100 ohm Pair 6+ 7 20 SerTC+ 20 7 terminated Pair 6- 20 7 SerTC- 8 19 Z0- Pair 7- 8 19 SerTFG- 21 6 Z0+ Pair 7+ 21 6 SerTFG+ 9 18 Z1- Pair 8- 9 18 CC1- 22 5 Z1+ Pair 8+ 22 5 CC1+ 10 17 Z2- Pair 9+ 10 17 CC2+ 23 4 Z2+ Pair 9- 23 4 CC2- 11 16 Zclk- Pair 10- 11 16 CC3- 24 3 Zclk+ Pair 10+ 24 3 CC3+ 12 15 Z3- Pair 11+ 12 15 CC4+ 25 2 Z3+ Pair 11- 25 2 CC4- 13 13 inner shield inner shield 13 13 inner shield 26 26 inner shield inner shield 26 26 inner shield TS-1001- -02 Sheet 3 of 3 Notes: 1. All pairs are individually shielded with aluminum foil. 2. Pair shields are wrapped aluminum out and are in contact with four internal drains (logic ground). 3. Outer braid and foil (chassis ground) are isolated from inner drains (logic ground).

© 3M 2003 Electronic and Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/eisd Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.