408-8717 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
/C0052/C0048/C0056/C0045/C0056/C0055/C0049/C0055/C0072/C0121/C0100/C0114/C0097/C0117/C0108/C0105/C0099/C0072/C0097/C0110/C0100/C0067/C0114/C0105/C0109/C0112/C0105/C0110/C0103/C0084/C0111/C0111/C0108/C0049/C0052/C0057/C0048/C0055/C0052/C0057/C0045/C0049 /C0082/C0101/C0118/C0065/C0050/C0111/C0102 /C0051 /C0084/C0121/C0099/C0111 /C0069/C0108/C0101/C0099/C0116/C0114/C0111/C0110/C0105/C0099/C0115 /C0067/C0111/C0114/C0112/C0111/C0114/C0097/C0116/C0105/C0111/C0110 4. Insert stripped wire into wire barrel of terminal or splice. 5. Continue pumping movable lever. A slight click may be heard, indicating the pump has shifted into the high–pressure stage. Continue pumping movable lever and completely crimp the connector. This tool has a built–in by–pass cartridge that will automatically activate when full pressure is reached. There will be a noticeable decrease in handle pressure when the by–pass is reached. /C0065/C0104/C0105/C0103/C0104/C0112/C0105/C0116/C0099/C0104/C0101/C0100/C0115/C0113/C0117/C0101/C0097/C0107/C0105/C0110/C0103/C0115/C0111/C0117/C0110/C0100/C0105/C0115/C0110/C0111/C0114/C0109/C0097/C0108/C0119/C0104/C0101/C0110 /C0116/C0104/C0101/C0116/C0111/C0111/C0108/C0105/C0115/C0111/C0112/C0101/C0114/C0097/C0116/C0105/C0110/C0103/C0105/C0110/C0116/C0104/C0101/C0104/C0105/C0103/C0104/C0112/C0114/C0101/C0115/C0115/C0117/C0114/C0101/C0115/C0116/C0097/C0103/C0101/C0046 6. Turn movable lever (to actuate striker), and compress levers to depress plunger. Movable die will now retract. See Figure 1. 7. Remove the crimped terminal or splice. /C0073/C0102/C0116/C0101/C0114/C0109/C0105/C0110/C0097/C0108 /C0111/C0114 /C0115/C0112/C0108/C0105/C0099/C0101 /C0115/C0116/C0105/C0099/C0107/C0115 /C0105/C0110 /C0100/C0105/C0101 /C0097/C0102/C0116/C0101/C0114 /C0099/C0114/C0105/C0109/C0112/C0105/C0110/C0103/C0044 /C0097/C0112/C0112/C0108/C0121 /C0097 /C0114/C0111/C0099/C0107/C0105/C0110/C0103 /C0097/C0099/C0116/C0105/C0111/C0110 /C0116/C0111 /C0114/C0101/C0109/C0111/C0118/C0101 /C0105/C0116 /C0102/C0114/C0111/C0109 /C0100/C0105/C0101/C0046 8. Inspect the crimped terminal or splice according to inspection procedure on instruction sheet packaged with the dies. /C0053/C0046 /C0077/C0065/C0073/C0078/C0084/C0069/C0078/C0065/C0078/C0067/C0069/C0065/C0078/C0068/C0073/C0078/C0083/C0080/C0069/C0067/C0084/C0073/C0079/C0078 It is recommended that a maintenance and inspection program be performed periodically to ensure dependable and uniform terminations. The hand tool is inspected before being shipped; however, It is recommended that the tool be inspected immediately upon arrival at your facility to ensure that the tool has not been damaged during shipment. /C0053/C0046/C0049/C0046 /C0068/C0097/C0105/C0108/C0121/C0077/C0097/C0105/C0110/C0116/C0101/C0110/C0097/C0110/C0099/C0101 1. Immerse the hand tool (levers partially closed) in a reliable commercial degreasing compound to remove accumulated dirt, grease, and foreign matter. When degreasing compound is not available, wipe the tool clean with a soft, lint–free cloth. Do NOT use hard or abrasive objects that could damage the tool. 2. Protect all pins, pivot points, and bearing surfaces with a THIN coat of any good grade SAE 20 motor oil. Do NOT oil excessively. 3. When the tool is not in use, keep the levers closed to prevent objects from becoming lodged in the dies. Store the tool in a clean dry area. /C0053/C0046/C0050/C0046 /C0080/C0101/C0114/C0105/C0111/C0100/C0105/C0099/C0073/C0110/C0115/C0112/C0101/C0099/C0116/C0105/C0111/C0110 Though recommendations call for at least one inspection a month, actual frequency depends on: /C0083The care, amount of use, and handling of the hand tool. /C0083The presence of abnormal amounts of dust and dirt. /C0083The degree of operator skill. /C0083Your own established standards. /C0065/C0046 /C0076/C0117/C0098/C0114/C0105/C0099/C0097/C0116/C0105/C0111/C0110 Keep all pins, pivot points, and bearing surfaces lubricated with SAE 20 motor oil as follows: Tool used in daily production—lubricate daily Tool used daily (occasionally)—lubricate weekly Tool used weekly—lubricate monthly Wipe excess oil from tool, particularly from crimping area. Oil transferred from the crimping area onto certain terminations may affect the electrical characteristics of an application. /C0065/C0115/C0108/C0105/C0103/C0104/C0116 /C0119/C0101/C0101/C0112/C0105/C0110/C0103 /C0111/C0102 /C0111/C0105/C0108 /C0102/C0114/C0111/C0109 /C0116/C0104/C0101 /C0114/C0097/C0109 /C0097/C0110/C0100 /C0112/C0117/C0109/C0112 /C0115/C0101/C0097/C0108/C0115/C0105/C0115/C0110/C0111/C0114/C0109/C0097/C0108/C0097/C0110/C0100/C0114/C0101/C0113/C0117/C0105/C0114/C0101/C0100/C0116/C0111/C0107/C0101/C0101/C0112/C0116/C0104/C0101/C0109/C0111/C0118/C0105/C0110/C0103 /C0112/C0097/C0114/C0116/C0115/C0108/C0117/C0098/C0114/C0105/C0099/C0097/C0116/C0101/C0100/C0046/C0069/C0120/C0099/C0101/C0115/C0115/C0105/C0118/C0101/C0108/C0101/C0097/C0107/C0097/C0103/C0101/C0105/C0110/C0100/C0105/C0099/C0097/C0116/C0101/C0115/C0097 /C0110/C0101/C0101/C0100/C0102/C0111/C0114/C0115/C0101/C0097/C0108/C0114/C0101/C0112/C0108/C0097/C0099/C0101/C0109/C0101/C0110/C0116/C0046/C0082/C0101/C0102/C0101/C0114/C0116/C0111/C0083/C0101/C0099/C0116/C0105/C0111/C0110/C0054/C0044 /C0082/C0069/C0084/C0085/C0082/C0078/C0047/C0082/C0069/C0080/C0076/C0065/C0067/C0069/C0077/C0069/C0078/C0084/C0046 /C0066/C0046 /C0086/C0105/C0115/C0117/C0097/C0108/C0073/C0110/C0115/C0112/C0101/C0099/C0116/C0105/C0111/C0110 1. Make certain all retaining pins are in place and secured with retaining rings. If replacements are necessary, return the tool for repair. See Section 6, RETURN/REPLACEMENT . 2. Inspect for worn, cracked, or broken areas. If damage is evident, return the tool for evaluation and repair as described in Section 6, RETURN/REPLACEMENT . /C0067/C0046 /C0067/C0114/C0105/C0109/C0112/C0105/C0110/C0103/C0080/C0114/C0101/C0115/C0115/C0117/C0114/C0101/C0073/C0110/C0115/C0112/C0101/C0099/C0116/C0105/C0111/C0110 Check the crimping pressure to ensure that dies are fully bottomed before pressure is reduced by the internal bypass valve. The inspection should be performed using each set of dies that will be used in the tool. 1. Install dies according to Section 3, DIE INSERTION AND REMOVAL, and the instruction sheet packaged with the dies. 2. Select wire and terminal or splice for dies being used. 3. Place terminal or splice in dies according to instruction sheet packaged with dies. 4. Perform crimping procedure as described in Section 4, CRIMPING PROCEDURE, Steps 3 through 5. Do not release hydraulic pressure at this time. /C0078/C0079/C0084/C0069 /C0105 /C0078/C0079/C0084/C0069 /C0105 /C0078/C0079/C0084/C0069 /C0105
/C0052/C0048/C0056/C0045/C0056/C0055/C0049/C0055/C0072/C0121/C0100/C0114/C0097/C0117/C0108/C0105/C0099/C0072/C0097/C0110/C0100/C0067/C0114/C0105/C0109/C0112/C0105/C0110/C0103/C0084/C0111/C0111/C0108/C0049/C0052/C0057/C0048/C0055/C0052/C0057/C0045/C0049 /C0051/C0111/C0102 /C0051/C0082/C0101/C0118/C0065 /C0084/C0121/C0099/C0111 /C0069/C0108/C0101/C0099/C0116/C0114/C0111/C0110/C0105/C0099/C0115 /C0067/C0111/C0114/C0112/C0111/C0114/C0097/C0116/C0105/C0111/C0110 5. Check the clearance between bottoming surfaces of crimping dies. If clearance is 0.025 mm [.001 in.] or less, the crimp pressure is satisfactory. If clearance exceeds 0.025 mm [.001 in.], the crimp pressure is not considered satisfactory. See Section 6, RETURN/REPLACEMENT. If the tool conforms to these inspection procedures, lubricate it with a THIN coat of any good grade SAE 20 motor oil and return it to service. /C0054/C0046 /C0082/C0069/C0084/C0085/C0082/C0078/C0047/C0082/C0069/C0080/C0076/C0065/C0067/C0069/C0077/C0069/C0078/C0084 Order replacement parts through your Tyco Electronics Representative, or call 1–800–526–5142, or send a facsimile of your purchase order to 1–717–986–7605, or write to: CUSTOMER SERVICE (38–35) TYCO ELECTRONICS CORPORATION P .O. BOX 3608 HARRISBURG, PA 17105–3608 Crimping heads may also be returned for evaluation and repair. For tool repair service, contact a Tyco Electronics Representative at 1–800–526–5136. /C0055/C0046 /C0082/C0069/C0086/C0073/C0083/C0073/C0079/C0078/C0083/C0085/C0077/C0077/C0065/C0082/C0089 /C0083Updated document to corporate requirements /C0083New format Figure 3 /C0049/C0053/C0048 /C0109/C0109 /C0091/C0053/C0046/C0057 /C0073/C0110/C0046/C0093 /C0040/C0067/C0108/C0111/C0115/C0101/C0100/C0041 /C0054/C0052/C0048 /C0109/C0109 /C0091/C0050/C0053/C0046/C0050 /C0073/C0110/C0046/C0093 /C0087/C0101/C0105/C0103/C0104/C0116/C0058 /C0055/C0046/C0056 /C0107/C0103 /C0040/C0049/C0055/C0046/C0050 /C0108/C0098/C0041