1467426 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. M23, Coupler connector, series: M23 PRO, straight, shielded: yes, for standard and ONECLICK fast locking system, No. of pos.: 7, Direction of rotation: Standard, contact connection type: Pin, Solder connection, cable diameter range: 4 mm ... 8.5 mm, coding: N, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb <0.1%) Your advantages Solutions with cross-manufacturer compatibility for standard and fast locking systems• Modern, consistent design for highly convenient operation Easy, cost-effective cable assembly: uniform shielding of M17 to M40 Commercial data Item number 1467426 Packing unit 1 pc Minimum order quantity 1 pc Product key ABRABG GTIN 4063151863692 Weight per piece (including packing) 120.4 g Weight per piece (excluding packing) 120.4 g Country of origin DE M23-07P1N129002S - Coupler connector 1467426 https://www.phoenixcontact.com/us/products/1467426 Jan 15, 2024, 7:34 AM Page 1 (10)

General Please observe the derating curve. Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting Safety note M23-07P1N129002S - Coupler connector 1467426 https://www.phoenixcontact.com/us/products/1467426 Jan 15, 2024, 7:34 AM Page 2 (10)

warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Circular connector (cable-side) Connector Insulating body Coding N Insulation body material PA 6.6 Insertion/withdrawal cycles 100 Connection method Solder connection Contact switching type Pin Application Signal Number of positions 7 Direction of rotation Standard Connection profile 7 Contact diameter Signal contacts 2 mm Litz wire cross-section Signal contacts min. 0.08 mm² Litz wire cross-section Signal contacts max. 2.5 mm² Nominal current per signal contact 20 A Note for max. connection cross section Rated voltage Signal contact 300 V Rated surge voltage 2.5 kV Overvoltage category II Degree of pollution 3 Installation height 2000 m Housing Housing material GD-Zn Type of locking for standard and ONECLICK fast locking system Pg screw connection none Degree of protection (plugged in) IP66 / IP68 (2 m / 24 h) Thread type M23 Seal External cable diameter 4 mm ... 8.5 mm Seal material FKM Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 105 °C (see to derating) Altitude 2000 m Permanent temperature 125 °C (DIN EN 60512-9-2 / 1000 h) M23-07P1N129002S - Coupler connector 1467426 https://www.phoenixcontact.com/us/products/1467426 Jan 15, 2024, 7:34 AM Page 3 (10)

N PO3 Connector pin assignment M23-07P1N129002S - Coupler connector 1467426 https://www.phoenixcontact.com/us/products/1467426 Jan 15, 2024, 7:34 AM Page 4 (10)

Ø 27,4 Dimensional drawing M23-07P1N129002S - Coupler connector 1467426 https://www.phoenixcontact.com/us/products/1467426 Jan 15, 2024, 7:34 AM Page 5 (10)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 M23-07P1N129002S - Coupler connector 1467426 https://www.phoenixcontact.com/us/products/1467426 Jan 15, 2024, 7:34 AM Page 6 (10)

Environmental product compliance Environmentally friendly use period: unlimited = EFUP-eChina RoHS No hazardous substances above threshold values M23-07P1N129002S - Coupler connector 1467426 https://www.phoenixcontact.com/us/products/1467426 Jan 15, 2024, 7:34 AM Page 7 (10)

FLANGE-M23PRO-SG - Square mounting flange 1055767 https://www.phoenixcontact.com/us/products/1055767 Square mounting flange, Axial seal, 4xM3 PROT-M23PRO-OT-IP20 - Plastic protective cap 1055753 https://www.phoenixcontact.com/us/products/1055753 Plastic protective cap, M23, degree of protection: IP20, series: M23 PRO M23-07P1N129002S - Coupler connector 1467426 https://www.phoenixcontact.com/us/products/1467426 Jan 15, 2024, 7:34 AM Page 8 (10)

PROT-M23PRO-OT-IP67 - Plastic protective cap 1055749 https://www.phoenixcontact.com/us/products/1055749 Plastic protective cap, M23, degree of protection: IP67, series: M23 PRO Signal M23PRO-VIB-ORING-OR - Sealing ring 1521137 https://www.phoenixcontact.com/us/products/1521137 Vibration O-ring, optional accessory for M23 PRO device connectors M23-07P1N129002S - Coupler connector 1467426 https://www.phoenixcontact.com/us/products/1467426 Jan 15, 2024, 7:34 AM Page 9 (10)

M23PRO-VIB-ORING-GN - Sealing ring 1521138 https://www.phoenixcontact.com/us/products/1521138 Vibration O-ring, optional accessory for M23 PRO device connectors Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com M23-07P1N129002S - Coupler connector 1467426 https://www.phoenixcontact.com/us/products/1467426 Jan 15, 2024, 7:34 AM Page 10 (10)