14522 EKTOR | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Quadro Advanced Bunker IP65, Tri-colour, Dual Power IP65 weatherproof rating and vandal-proof IK08 rating 8 years design life at max. ambient Tri-colour selectable 3000K / 4000K / 6000K Emergency and non-emergency models Selectable power consumption: 20W or 12W Inbuilt mains rated microwave sensor Corridor mode

ORDERING INFORMATION

Description Ektor Quadro LED bunker IP65 w/corridor function sensor Driver Type Fixed output Item Code EV-QUADRO-ADV-S EFFICIENCIES Total System Efficiency 130 lm/W The performance of each component of a luminaire is demonstrated through its efficiencies, which together determine the total system efficiency of the product. The output of the LED chip is first multiplied by the optical and thermal efficiencies to calculate the Luminaire efficiency. However, this calculation does not consider the driver efficiency. To determine the overall efficiency of the system, the Luminaire efficiency must be multiplied by the driver efficiency, which accounts for all losses in the system. MECHANICAL Body Material Polycarbonate Diffuser Material Polycarbonate IK Rating IK08 Installation Type Surface mount IP Rating IP65 ELECTRICAL Electrical Rating Class I Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% System Max Wattage 20 W Working Temp Range 0 to 40 °C LAMP Macadam Steps (SDCM) 5-step MacAdam Ellipse CCT Configuration TRI-CCT Colour Rendering Index (CRI) >80 Lamp/LED Current 460 mA Lamp/LED voltage 36 V LED LIFETIME Ambient Temp (°C) 25 °C 40 °C L90B10 43000 hrs 39000 hrs This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output and is tested accordingly to TM-21. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. After the defined lifetime, the system will reach the defined lumen depreciation and the average led failures is defined by the B rating. The B rating is defined in and tested to IEC62717. TM-21 Test Hours 9000 hrs COLOUR TEMPERATURE

9 Watts

3000 K 1100 lm

4000 K 1350 lm

6000 K 1300 lm

18 Watts

3000 K 2200 lm

4000 K 2650 lm

6000 K 2600 lm

1300 438 658 sales@evolt.com.au ektor.com.au © 2025 Evolt Generated on 4th of February 2025 08:48:28 - Page 1

Wiring Type Re-wireable terminal block (3 pin) PSTLM 0.09 Short Term Light Modulation (PstLM): The requirement is that PstLM should be less than or equal to 1.0. This metric measures the short-term flicker severity and ensures that flicker is not perceptible or is at a level that does not cause discomfort or health issues. SVM 0.012 Stroboscopic Visibility Measure (SVM): The requirement for SVM is that it should be less than or equal to 0.4. The SVM metric assesses the visibility of the stroboscopic effect, which can make moving objects appear to be stationary or moving in discrete steps, thus ensuring that this effect is minimized in lighting environments to prevent visual discomfort and safety hazards. SENSOR (S SUFFIX) Adjustable Detection Area / Sensitivity Yes Adjustable Hold Time Yes Adjustable Standby Level Yes Adjustable Standby Period Yes Corridor Function Yes Detection Range 10 m Dusk Mode Yes Lux Adjustment Yes Sensor Type Microwave Switched Output No Time Delay 5s-14mins EMERGENCY (EM SUFFIX) Replacement Battery Code 1302 COMPLIANCE Product Design Life 8 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. Standards AS/NZS 60598.1 AS/NZS 60598.2.1 AS/NZS 61347.1 AS/NZS 61347.2.13 AS/NZS 61058.1 AS/NZS CISPR 15 AS/NZS 4268 WARRANTY Commercial Use Warranty 5 RTB (Total 5 Years) VIP Warranty 2 Onsite, 3 RTB (Total 5 Years) VIP warranty is available to registered users and is subjected to additional terms and conditions. DIMENSIONS Product Height 102 mm Product Length 275 mm Product Width 275 mm LINE DRAWINGS EV/QUADRO/ADV Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 4th of February 2025 08:48:28 - Page 2