1442227 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
https://www.phoenixcontact.com/pi/products/1442227 09/11/2020 Page 1 / 9 Flush-type connector - SACCBP-MS-12CON-M16/1,0- PVCSCO - 1442227 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type plug, shielded, 12-pos., M12, A-coded, rear/screw mounting with M16 thread, with 1 m cable, 12 x 0.14 mm² Your advantages Pre-assembled with cables in various standard lengths for immediate use Customer-specific assemblies and cable lengths can be supplied Sealed on the cable side for optimum tightness of seal For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356533362 Technical data Dimensions Length of cable 1 m Stripping length of the free conductor end 35 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 (When plugged in) IP65 (When plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using
https://www.phoenixcontact.com/pi/products/1442227 09/11/2020 Page 2 / 9 Flush-type connector - SACCBP-MS-12CON-M16/1,0- PVCSCO - 1442227 Technical data General a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 1.5 A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 12 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Signal type/category Universal Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M16 x 1.5 Thread with flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type PVC black Cable type (abbreviation) PVC Conductor cross section 6x 2x 0.14 mm² Conductor structure signal line 18x 0.10 mm Core diameter including insulation 1 mm ±0.05 mm Thickness, insulation 0.21 mm Wire colors White-brown, green-yellow, gray-pink, blue-red, black-violet, gray/pink- red/blue Overall twist Six pairs around the filler to the core Shielding Tinned copper braided shield Optical shield covering 85 % External sheath, color black RAL 9005 External cable diameter 7.00 mm External cable diameter D 7 mm ±0.03 mm
https://www.phoenixcontact.com/pi/products/1442227 09/11/2020 Page 3 / 9 Flush-type connector - SACCBP-MS-12CON-M16/1,0- PVCSCO - 1442227 Technical data Cable Smallest bending radius, fixed installation 42 mm Smallest bending radius, movable installation 105 mm Outer sheath, material PVC Material, inner sheath PVC Material conductor insulation PVC Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 Conductor resistance 142 Ω/km (at 20 °C) Nominal voltage, cable 300 V Test voltage, cable 1500 V AC Flame resistance IEC 60332-1-2, IEC 60332-1, FT1, VW-1 Resistance to oil in accordance with DIN EN 60811-404 Other resistance Hydrolysis and microbe resistant as per VDE 0282 section 10 Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 Flame resistance IEC 60332-1-2, IEC 60332-1, FT1, VW-1 Resistance to oil in accordance with DIN EN 60811-404 Other resistance Hydrolysis and microbe resistant as per VDE 0282 section 10 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings
https://www.phoenixcontact.com/pi/products/1442227 09/11/2020 Page 4 / 9 Flush-type connector - SACCBP-MS-12CON-M16/1,0- PVCSCO - 1442227 Schematic diagram Pin assignment M12 male connector, 12-pos., male side view
https://www.phoenixcontact.com/pi/products/1442227 09/11/2020 Page 5 / 9 Flush-type connector - SACCBP-MS-12CON-M16/1,0- PVCSCO - 1442227 Dimensional drawing Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation)
https://www.phoenixcontact.com/pi/products/1442227 09/11/2020 Page 6 / 9 Flush-type connector - SACCBP-MS-12CON-M16/1,0- PVCSCO - 1442227 Dimensional drawing M12 flush-type connector Circuit diagram Contact assignment of the M12 plugs
https://www.phoenixcontact.com/pi/products/1442227 09/11/2020 Page 7 / 9 Flush-type connector - SACCBP-MS-12CON-M16/1,0- PVCSCO - 1442227 Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details
https://www.phoenixcontact.com/pi/products/1442227 09/11/2020 Page 8 / 9 Flush-type connector - SACCBP-MS-12CON-M16/1,0- PVCSCO - 1442227 Approvals EAC B.01687 Accessories Accessories Plug for cable screw gland Screw plug - SACC-M16-SEALING PLUG SET - 1453368 M16 screw plug for unused M12 housing cutouts Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field Seal Flat gasket - SACC-M16-SEAL CLM - 1430394 M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread
https://www.phoenixcontact.com/pi/products/1442227 09/11/2020 Page 9 / 9 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8
32825 Blomberg
Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com