1436369 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 11

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector, rear mounting, Universal, 8-position, Flush-type female connector, straight, M12-Standard, coding: A , on free cable end, Rear mounting, Pg9, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire Your advantages Preassembled with litz wires for immediate use• Customer-specific assemblies and litz wire lengths available Standard pin assignments and codings for signal transmission with a uniform design-in design For high transmission safety: shield connection to the housing with optional EMC nut Commercial data Item number 1436369 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB24 Product key ABQCPE Catalog page Page 52 (C-2-2019) GTIN 4046356438339 Weight per piece (including packing) 20.2 g Weight per piece (excluding packing) 20.2 g Customs tariff number 85444290 Country of origin DE SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 1 (11)

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Mounting Mounting type Rear mounting Pg9 With flat nut Assembly instructions With flat nut Connection method Individual wires Product properties Product type Circular connectors (device side) Sensor type Universal Number of positions 8 Shielded no Coding A Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Color black Flammability rating according to UL 94 HB Seal material Viton Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection PA 6.6 Conductor material Tin-plated Cu litz wires Electrical properties Rated surge voltage 0.8 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ

30 V (AC)Nominal voltage UN

30 V (DC)

SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 2 (11)

Max. conductor resistance 80 Ω/km Connection data Conductor connection Connection method Individual wires Contact connection type Crimp contacts Conductor cross section 0.25 mm²

1.25 NmTightening torque

1.5 Nm Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Flush-type female connector Head cable outlet straight Head thread type M12 Head locking type Standard Coding A Connection 2 Head design free cable end Cable/line Cable length 0.5 m Cable type TPE litz wire Signal type/category Universal Wire diameter incl. insulation 1.15 mm ±0.07 mm Single wire, color brown, blue, white, gray, pink, green, yellow, red Conductor material Tin-plated Cu litz wires Conductor structure signal line 14x 0.15 mm AWG signal line 24 Material wire insulation TPE Thickness, insulation 0.21 mm Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Cable resistance ≤ 80 Ω/km Cable insulation resistance ≥ 20 MΩ*km -40 °C ... 85 °C (cable, fixed installation)Ambient temperature (operation) -25 °C ... 85 °C (Cable, flexible installation) SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 3 (11)

Environmental and real-life conditions Ambient conditions IP67Degree of protection IP67 -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) -25 °C ... 85 °C (Cable, flexible installation) Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-101 SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 4 (11)

13,4 2217 M12x1 19,5 500 PG9 Dimensional drawing SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 5 (11)

Pin assignment M12 socket, 8-pos., A-coded, view female side SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 6 (11)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1436369  EAC Approval ID: B.01687 SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 7 (11)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 8.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 8 (11)

Environmental product compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 9 (11)

https://www.phoenixcontact.com/us/products/1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors PROT-M12 SH - Screw plug 1503302 https://www.phoenixcontact.com/us/products/1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 10 (11)

https://www.phoenixcontact.com/us/products/1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry SACC-PG9-SEAL CLM - Flat gasket 1556320 https://www.phoenixcontact.com/us/products/1556320 Pg9 flat gasket, for M12 flush-type connectors with Pg9 fastening thread Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-DSI-M12FS-8CON-PG9/0,5 P - Device connector, rear mounting 1436369 https://www.phoenixcontact.com/us/products/1436369 Sep 11, 2023, 4:22 AM Page 11 (11)