1430 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Page <1> V1.025/05/20 Split Loom Flame Retardant Polyethylene, Grey Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Description: Flexible convoluted tubing / conduit manufactured from a flame retardant polyethylene resin. Characteristics: Flexibility : Excellent Abrasion Resistance : Good Chemical Resistance : Good Operating Temperature : -40°C to +93°C (-40°F to 200°F) Typical Physical Properties Test Method Value Units Specific Gravity/Density ASTM D792 1.005 - Elongation @ Break ASTM D638 945 % Elongation @ Yield ASTM D638 167 % Tensile Strength @ 25C ASTM D638 14.99619 MPa 2% Secant Modulus - - - Flexural Modulus ASTM D790 240 MPa Melting Point ASTM D3418 239 (115) °F (°C) Notched Izod Impact Test ASTM D256 10 ft lb/in Heat Deflection Temperature @66psi ASTM D648 104 (40) °F (°C) Heat Deflection Temperature @264psi ASTM D648 122 (50) °F (°C)
Page <2> V1.025/05/20 Split Loom Flame Retardant Polyethylene, Grey Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Table Description Part Number 1/4" Grey Flame Retardant Polyethylene Split Loom 1429 3/8" Grey Flame Retardant Polyethylene Split Loom 1430 1/2" Grey Flame Retardant Polyethylene Split Loom 1431 5/8" Grey Flame Retardant Polyethylene Split Loom 1432 3/4" Grey Flame Retardant Polyethylene Split Loom 1433 1" Grey Flame Retardant Polyethylene Split Loom 1434 Dimension “D” Cut-To-Length Specifications Less than or equal to 400mm +/- 10mm Greater than 400mm +/- 2.5% of target length Dimensions : Millimetres (Inches) Product Dimensions: Part Number Nominal ID Diameter Dia. Code Dimension “A” I.D. Dimension “B” O.D. Dim. “C” Wall Note: (A) Product tolerances are general and are designed to encompass all available materials. Tighter tolerances may be available for a specific material. on a case to case basis. Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.