1422025-7

P2-V23079 TEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

07-2015, Rev.0715 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays n Standard telecom relay (ringing and test access) n Slim line 15x7.5mm (.590x.295”) n Max. switching current 5A n 2 form C bifurcated contacts (2 changeover contacts, 2 CO) n Immersion cleanable n High sensitivity for low power consumption 140mW/ 70mW n Single coil version with surge voltage resistance between contact and coil: 2.5kV (2/10μs) meets the Telcordia Requirement GR-1089, 1.5kV (10/160μs) meets FCC Part 68 Typical applications Communications equipment linecard application (ringing and test access), PABX, voice over IP , office equipment, measurement and control equipment, automotive equipment as CAN bus, keyless entry, speaker switch, medical equipment, consumer electronics, set top boxes, HiFi Approvals UL 508 File No. E 111441, UL 60950, IEC/EN60950 IEC Ref. Cert. No. 327 Technical data of approved types on request Contact Data Contact arrangement 2 form C (CO) Max. switching voltage 220VDC, 250VAC Rated current 2A Limiting continuous current, 85°C 2A Switching Power 60W, 62.5VA Contact material AgNi, gold-covered Contact style bifurcated contact Minimum switching voltage 100μV Thermoelectrical potential <10µV Initial contact resistance <50mΩ at 10mA, 20mV Frequency of operation, without load 50 operations/s Operate time typ. 2ms, max. 4ms Set/reset time typ. 2ms, max. 4ms Release time without diode in parallel typ. 2ms, max. 4ms with diode in parallel typ. 4ms, max. 6ms Bounce time typ. 1ms, max. 3ms Electrical endurance at 12V / 10mA typ. 5x107 operations at 6V / 100mA typ. 1x107 operations at 60V / 500mA typ. 5x105 operations at 30V / 1000mA typ. 1x106 operations at 30V / 2000mA typ. 2x105 operations Contact ratings, UL 110VDC / 0.3A - 33W 30VDC / 2.0A - 60W 120VAC / 0.5A - 60VA 240VAC / 0.25A -60VA Mechanical endurance typ. 100x106 operations Coil Data Magnetic system polarized Coil voltage range 2 to 24VDC Max. coil temperature 125°C Thermal resistance < 125K/W Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage Voltage voltage resistance power VDC VDC VDC VDC Ω±10% mW 008 3.00 2.25 6.50 0.30 64 140 016 4.00 3.00 8.70 0.40 114 140 011 4.50 3.38 9.80 0.45 145 140 001 5.00 3.75 10.90 0.50 178 140 002 6.00 4.50 13.00 0.60 257 140 006 9.00 6.75 19.60 0.90 578 140 003 12.00 9.00 26.15 1.20 1029 140 005 24.00 18.00 52.30 2.40 4114 140 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. P2 Relay V23079 DC current [A] DC voltage [VDC] Max. DC load breaking capacity 108-98002 Rev. E All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 15 Telecom-, Signal and RF Relays P2 V23079 Relay AXICOM Coil Operating Range Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min. Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Coil Voltage [U/Unom] Uop. min. Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A 70 mW Unom. nominal coil voltage Ambient Temperature [°C] 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Ambient Temperature [°C] Coil Voltage [U/Unom] 140 mW Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Unom. nominal coil voltage Uop. min. Urel. min. 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Ambient Temperature [°C] Coil Voltage [U/Unom] 200 mW Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Unom. nominal coil voltage Uop. min. Urel. min. Z

07-2015, Rev. 0715 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays P2 Relay V23079 (Continued) Insulation Data Standard HDV Initial dielectric strength between open contacts 1000Vrms 1500V rms between contact and coil 1500Vrms 1500V rms between adjacent contacts 1000 Vrms 1500V rms Initial surge withstand voltage according to Telcordia TR-NWT-001089 (2/10μs) between open contacts 2000V 2500V between contact and coil 2500V 2500V between adjacent contacts 2500V 2500V according to (10/700 μs IEC 60950) between open contacts 2000V 2500V between contact and coil 2500V 2500V between adjacent contacts 2500V 2500V Initial insulation resistance at 500 Vdc > 109Ω Capacitance between open contacts max. 1pF between contact and coil max. 2pF between adjacent contacts max. 1.5pF Clearance /creepage according to IEC / EN 60950 1.3/2.5mm Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +85°C Category of environmental protection IEC 61810 RT III - wash tight Vibration resistance (functional) 35g, 10 to 1000Hz Shock resistance (functional) IEC 60068-2-27 (half sine) 100g Terminal type PCB-THT, SMT long and short terminals Weight max. 2.8 g Resistance to soldering heat THT IEC 60068-2-20 265°C/10s Moisture sensitive level, JEDEC J-Std-020D MSL3 related only to SMT relays packed in orginal dry-packs Ultrasonic cleaning not recommended Packaging/unit THT box/2000 pcs. SMT reel/2000 pcs. or 2500 pcs. Coil Data (continued) Coil versions, bistable Coil Rated Set Limiting Reset Coil Rated coil code voltage voltage Voltage voltage resistance power VDC VDC VDC VDC Ω±10% mW Bistable, 1 coil 108 3.00 2.25 9.2 -2.25 128 70 111 4.50 3.38 13.85 -3.38 289 70 101 5.00 3.75 15.33 -3.75 357 70 102 6.00 4.50 18.5 -4.50 514 70 106 9.00 6.75 27.75 -6.75 1157 70 103 12.00 9.00 37 -9.00 2057 70 105 24.00 18.00 74 -18.00 8228 70 Bistable, 2 coil 219 2.00 1.50 4.33 1.50 28 140 218 2.40 1.80 5.2 1.80 41 140 208 3.00 2.25 6.5 2.25 64 140 211 4.50 3.38 9.8 3.38 145 140 201 5.00 3.75 10.9 3.75 178 140 202 6.00 4.50 13 4.50 257 140 206 9.00 6.75 19.6 6.75 578 140 203 12.00 9.00 26.15 9.00 1029 140 205 24.00 18.00 52.3 18.00 4114 140 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Coil versions, high dielectric version, monostable, overmolded Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage Voltage Voltage resistance power VDC VDC VDC VDC Ω±10% mW 008 3.00 2.25 6.1 0.30 45 200 001 5.00 3.75 10.1 0.50 125 200 002 6.00 4.50 12.1 0.60 180 200 006 9.00 6.75 18.2 0.90 405 200 003 12.00 9.00 24.2 1.20 720 200 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 108-98002 Rev. E All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 15 Telecom-, Signal and RF Relays P2 V23079 Relay AXICOM Coil Operating Range Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min. Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Coil Voltage [U/Unom] Uop. min. Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A 70 mW Unom. nominal coil voltage Ambient Temperature [°C] 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Ambient Temperature [°C] Coil Voltage [U/Unom] 140 mW Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Unom. nominal coil voltage Uop. min. Urel. min. 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Ambient Temperature [°C] Coil Voltage [U/Unom] 200 mW Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Unom. nominal coil voltage Uop. min. Urel. min. 108-98002 Rev. E All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 15 Telecom-, Signal and RF Relays P2 V23079 Relay AXICOM Coil Operating Range Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min. Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Coil Voltage [U/Unom] Uop. min. Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A 70 mW Unom. nominal coil voltage Ambient Temperature [°C] 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Ambient Temperature [°C] Coil Voltage [U/Unom] 140 mW Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Unom. nominal coil voltage Uop. min. Urel. min. 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 Ambient Temperature [°C] Coil Voltage [U/Unom] 200 mW Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Unom. nominal coil voltage Uop. min. Urel. min.

07-2015, Rev.0715 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays P2 Relay V23079 (Continued) PCB layout TOP view on component side of PCB THT version SMT, long terminals SMT, short terminals 0,9 ±0,1 Contacts are shown in reset condition. Both coils can be used as either set or reset coils. Contact position might change during transportation and must be reset before use. Monostable version Terminal assignment TOP view on component side of PCB Bistable version, 1-coil Bistable version, 2-coils Dimensions 0.5±0.05 10.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.8±0.1 3.25-0.25 0.55-0.15 5.52±0.15 9.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 10.4±0.15 5.52 7.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.9±0.1 14.6±0.1 7.2±0.1 0.5±0.05 9.5±0.1 3.25-0.25 0.45 5.52 9.4±0.15 14.6±0.1 7.2±0.1 0.5±0.05 9.9±0.15 5.52 7.4±0.15 14.6±0.1 7.2±0.1 THT version SMT, long terminals SMT, short terminals Standard coil 0.5±0.05 10.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.8±0.1 3.25-0.25 0.55-0.15 5.52±0.15 9.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 10.4±0.15 5.52 7.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.9±0.1 14.6±0.1 7.2±0.1 0.5±0.05 9.5±0.1 3.25-0.25 0.45 5.52 9.4±0.15 14.6±0.1 7.2±0.1 0.5±0.05 9.9±0.15 5.52 7.4±0.15 14.6±0.1 7.2±0.1 0.5±0.05 10.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.8±0.1 3.25-0.25 0.55-0.15 5.52±0.15 9.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 10.4±0.15 5.52 7.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.9±0.1 14.6±0.1 7.2±0.1 0.5±0.05 9.5±0.1 3.25-0.25 0.45 5.52 9.4±0.15 14.6±0.1 7.2±0.1 0.5±0.05 9.9±0.15 5.52 7.4±0.15 14.6±0.1 7.2±0.1 0.5±0.05 10.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.8±0.1 3.25-0.25 0.55-0.15 5.52±0.15 9.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 10.4±0.15 5.52 7.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.9±0.1 14.6±0.1 7.2±0.1 0.5±0.05 9.5±0.1 3.25-0.25 0.45 5.52 9.4±0.15 14.6±0.1 7.2±0.1 0.5±0.05 9.9±0.15 5.52 7.4±0.15 14.6±0.1 7.2±0.1 THT version SMT, long terminals SMT, short terminals Overmolded coil, high dielectric version 0.5±0.05 10.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.8±0.1 3.25-0.25 0.55-0.15 5.52±0.15 9.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 10.4±0.15 5.52 7.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.9±0.1 14.6±0.1 7.2±0.1 0.5±0.05 9.5±0.1 3.25-0.25 0.45 5.52 9.4±0.15 14.6±0.1 7.2±0.1 0.5±0.05 9.9±0.15 5.52 7.4±0.15 14.6±0.1 7.2±0.1 0.5±0.05 10.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.8±0.1 3.25-0.25 0.55-0.15 5.52±0.15 9.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 10.4±0.15 5.52 7.4±0.15 14.5±0.1 7.2±0.1 0.5±0.05 9.9±0.1 14.6±0.1 7.2±0.1 0.5±0.05 9.5±0.1 3.25-0.25 0.45 5.52 9.4±0.15 14.6±0.1 7.2±0.1 0.5±0.05 9.9±0.15 5.52 7.4±0.15 14.6±0.1 7.2±0.1

07-2015, Rev. 0715 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays P2 Relay V23079 (Continued) Processing full line: typical dotted line: process limits external preheating 240°C 180°C 130°C 100°C forced cooling 20 to 40s Time [s] Temperature [°C] Vapour phase soldering temperature/time profile (lead and housing peak temp.) Recommended soldering conditions Vapour phase soldering Time [s] Temperature [°C] Recommended reflow soldering profile Infrared soldering temperature/time profile (lead and housing peak temp.) Reel dimensions Packing

07-2015, Rev.0715 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM 15.5 10.4 0.4 10.4 0.4 15.5 10.4 0.4 NEW THIS DRAWING IS A CONTROLLED DOCUMENT

1 PLC

0 PLC

2 PLC

3 PLC

4 PLC

DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity B B A A 24±0.3 PS conductivity 10 B-B 2:1 2:1 1.2+0.2 11.5±0.1 max. 1.75±0.14±0.1 1.9±0.2 (3.6) max. R0.3 (3.6) 1.9±0.2 4.4±0.2 2.2±0.2 1.3±0.2 max. 3° 4±0.2 10.4+0.3 10±0.2 12±0.2 15.4±0.2 16±0.15 (8) 1.5 0.12±0.1 1.5 0.1 0.6 12.2±0.2 ( 1.5) (48) max. R0.3 max. max. 3° 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm A-A C23303-A079-C121 30.3.2012 -Zdenek Curda -- -mm 30.3.2012-

0.1 Petr Hofman

0.01 - 0.001

0.0001 P2L3 - Blister tape long terminals-

-- 4:1 C23303-A079-C121 1 1 3 3 - 30.03.2012 ZC PH 2 - 17.06.2011 PH 9122 1 - 25.05.1998 PH 9122 THIS DRAWING IS A CONTROLLED DOCUMENT DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity B B A A 24±0.3 PS conductivity 10 B-B 2:1 2:1 1.2+0.2 11.5±0.1 max. 1.75±0.14±0.1 1.9±0.2 (3.6) max. R0.3 (3.6) 1.9±0.2 4.4±0.2 2.2±0.2 1.3±0.2 max. 3° 4±0.2 10.4+0.3 10±0.2 12±0.2 15.4±0.2 16±0.15 (8) 1.5 0.12±0.1 1.5 0.1 0.6 12.2±0.2 ( 1.5) (48) max. R0.3 max. max. 3° 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm A-A C23303-A079-C121 30.3.2012 -Zdenek Curda -- -mm 30.3.2012- 0.01 - 0.001 -- 4:1 C23303-A079-C121 1 1 3 3 - 30.03.2012 ZC PH 2 - 17.06.2011 PH 9122 1 - 25.05.1998 PH 9122 THIS DRAWING IS A CONTROLLED DOCUMENT DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity B B A A 24±0.3 PS conductivity 10 B-B 2:1 2:1 1.2+0.2 11.5±0.1 max. 1.75±0.14±0.1 1.9±0.2 (3.6) max. R0.3 (3.6) 1.9±0.2 4.4±0.2 2.2±0.2 1.3±0.2 max. 3° 4±0.2 10.4+0.3 10±0.2 12±0.2 15.4±0.2 16±0.15 (8) 1.5 0.12±0.1 1.5 0.1 0.6 12.2±0.2 ( 1.5) (48) max. R0.3 max. max. 3° 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm A-A C23303-A079-C121 30.3.2012 -Zdenek Curda -- -mm 30.3.2012- 0.01 - 0.001 -- 4:1 C23303-A079-C121 1 1 3 3 - 30.03.2012 ZC PH 2 - 17.06.2011 PH 9122 1 - 25.05.1998 PH 9122 THIS DRAWING IS A CONTROLLED DOCUMENT DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity A A B B 24±0.3 0.6 PS conductivity 10 B-B 2:12:1 1.2+0.2 11.5±0.1 12±0.15 1.5 0.1 10.9+0.3 4±0.2 max. R0.3 max. 3° 1.5 0.1 8±0.2 9±0.2 max. R0.3 9.1±0.2 1.3±0.2 2.2±0.2 15.4±0.2 max. (3.6)(3.6) 1.9±0.21.9±0.2 4.5±0.2 max. 3° max. 3° 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm A-A C23303-A079-C120 26.3.2012 -Zdenek Curda -- -mm 26.3.2012- 0.01 - 0.001

0.0001 P2L2/P2L3/FU2 - Blister tape short terminals-

-- 4:1 C23303-A079-C120 1 1 8 8 - 26.3.2012 ZC PH 7 - 13.12.2005 9193 9121 1 - 25.05.1998 9188 9151 THIS DRAWING IS A CONTROLLED DOCUMENT DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity A A B B 24±0.3 0.6 PS conductivity 10 B-B 2:12:1 1.2+0.2 11.5±0.1 12±0.15 1.5 0.1 10.9+0.3 4±0.2 max. R0.3 max. 3° 1.5 0.1 8±0.2 9±0.2 max. R0.3 9.1±0.2 1.3±0.2 2.2±0.2 15.4±0.2 max. (3.6)(3.6) 1.9±0.21.9±0.2 4.5±0.2 max. 3° max. 3° 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm A-A C23303-A079-C120 26.3.2012 -Zdenek Curda -- -mm 26.3.2012- 0.01 - 0.001 -- 4:1 C23303-A079-C120 1 1 8 8 - 26.3.2012 ZC PH 7 - 13.12.2005 9193 9121 1 - 25.05.1998 9188 9151 THIS DRAWING IS A CONTROLLED DOCUMENT DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: USED ON P LTR APVDDATEREVISION RECORD DWN DWG NO SIZE OF C 12345678 A B DRAWING NO LOC DIST D SHEET REV APVD DWN CHK NAME SCALE MATERIAL HEAT TREAT ANGLES SURFACE TEXTURE 3306-7 (3/11) THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). TE Connectivity A A B B 24±0.3 0.6 PS conductivity 10 B-B 2:12:1 1.2+0.2 11.5±0.1 12±0.15 1.5 0.1 10.9+0.3 4±0.2 max. R0.3 max. 3° 1.5 0.1 8±0.2 9±0.2 max. R0.3 9.1±0.2 1.3±0.2 2.2±0.2 15.4±0.2 max. (3.6)(3.6) 1.9±0.21.9±0.2 4.5±0.2 max. 3° max. 3° 1.5 1.5 -9 S/m roztec transportnich otvoru distance of transport holes 4x10=40±0.2mm 4x11=44±0.2mm 4x12=48±0.2mm A-A C23303-A079-C120 26.3.2012 -Zdenek Curda -- -mm 26.3.2012- 0.01 - 0.001 -- 4:1 C23303-A079-C120 1 1 8 8 - 26.3.2012 ZC PH 7 - 13.12.2005 9193 9121 1 - 25.05.1998 9188 9151 Tape and reel for SMT 10.4 0.4 10.4 0.4 15.5 10.4 0.4 NEW NEW Signal Relays P2 Relay V23079 (Continued)

07-2015, Rev. 0715 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays P2 Relay V23079 (Continued) Product code structure Typical product code V23079 A 1 001 B 301 Type V23079 Signal Relay P2 Series Version A THT, monostable D SMT, monostable, long term. G SMT, monostable, short term. B THT, latching, 2 coils E SMT, latching, 2 coils long term. H SMT, latching, 2 coils short term. C THT, latching, 1 coil F SMT, latching, 1 coil long term. J SMT, latching, 1 coil short term. Coil design

1 Standard coil (not for high dielectric version)

2 Overmolded coil

Coil code: please refer to coil versions table Version B Standard version X High dielectric version Contacts for standard versions 301 2 form C contacts (2 CO), AgNi +Au 201 2 form C contacts (2 CO), AgPd +Au; on request only Product code Version Coil design Coil type Coil voltage Part number V23079-A1006-B301 9VDC 2-1393788-0 V23079-A1005-B301 24VDC 1-1393788-6 V23079-A2008-B301 Overmolded 3VDC 6-1419120-6 V23079-A2011-B301 4.5VDC 3-1393789-9 V23079-A2001-B301 5VDC 3-1393789-5 V23079-A2002-B301 6VDC 3-1393789-6 V23079-A2006-B301 9VDC 3-1393789-8 V23079-A2003-B301 12VDC 3-1393789-7 V23079-B1218-B301 Standard Bistable, 2 coils 2.4VDC 1422002-8 V23079-B1208-B301 3VDC 4-1393788-1 V23079-B1211-B301 4.5VDC 4-1393788-2 V23079-B1201-B301 5VDC 3-1393788-3 V23079-B1202-B301 6VDC 3-1393788-5 V23079-B1206-B301 9VDC 3-1393788-9 V23079-B1203-B301 12VDC 3-1393788-6 V23079-B1205-B301 24VDC 3-1393788-7 V23079-B2219-B301 Overmolded 2VDC 1-1422002-2 V23079-B2218-B301 2.4VDC 1-1422002-1 V23079-B2208-B301 3VDC 1-1422002-0 V23079-B2201-B301 5VDC 1422002-9 V23079-C1108-B301 Standard Bistable, 1 coils 3VDC 5-1393788-3 V23079-C1111-B301 4.5VDC 5-1393788-4 V23079-C1101-B301 5VDC 4-1393788-5 V23079-C1102-B301 6VDC 4-1393788-7 V23079-C1106-B301 9VDC 5-1393788-1 V23079-C1103-B301 12VDC 4-1393788-8 V23079-C1105-B301 24VDC 5-1393788-0

07-2015, Rev.0715 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays P2 Relay V23079 (Continued) Product code Version Coil design Coil type Coil voltage Part number V23079-D1006-B301 9VDC 5-1393788-9 V23079-D1005-B301 24VDC 5-1393788-8 V23079-D2008-B301 Overmolded 3VDC 4-1393789-7 V23079-D2011-B301 4.5VDC 4-1393789-8 V23079-D2001-B301 5VDC 4-1393789-3 V23079-D2002-B301 6VDC 4-1393789-4 V23079-D2006-B301 9VDC 4-1393789-6 V23079-D2003-B301 12VDC 4-1393789-5 V23079-E1219-B301 Standard Bistable, 2 coils 2VDC 1-1422007-0 V23079-E1218-B301 2.4VDC 1422007-5 V23079-E1208-B301 3VDC 7-1393788-1 V23079-E1211-B301 4.5VDC 7-1393788-2 V23079-E1201-B301 5VDC 6-1393788-8 V23079-E1202-B301 6VDC 1393789-5 V23079-E1206-B301 9VDC 1393789-9 V23079-E1203-B301 12VDC 6-1393788-9 V23079-E1205-B301 24VDC 7-1393788-0 V23079-E2219-B301 Overmolded 2VDC 1422007-6 V23079-E2201-B301 5VDC 1422007-7 V23079-E2208-B301 3VDC 1422007-8 V23079-E2218-B301 2.4VDC 1422007-9 V23079-F1108-B301 Standard Bistable, 1 coil 3VDC 7-1393788-5 V23079-F1111-B301 4.5VDC 1-1393789-4 V23079-F1101-B301 5VDC 7-1393788-3 V23079-F1102-B301 6VDC 1-1393789-0 V23079-F1106-B301 9VDC 1-1393789-2 V23079-F1103-B301 12VDC 7-1393788-4 V23079-F1105-B301 24VDC 1-1393789-1 V23079-G1005-B301 SMT, short pins Monostable 24VDC 7-1393788-8 V23079-G2008-B301 Overmolded 3VDC 5-1393789-4 V23079-G2016-B301 4VDC 1393790-5 V23079-G2011-B301 4.5VDC 5-1393789-5 V23079-G2001-B301 5VDC 4-1393789-9 V23079-G2002-B301 6VDC 5-1393789-0 V23079-G2006-B301 9VDC 5-1393789-3 V23079-G2003-B301 12VDC 5-1393789-1 V23079-H1208-B301 Standard Bistable, 2 coils 3VDC 2-1393789-4 V23079-H1211-B301 4.5VDC 8-1393788-4 V23079-H1201-B301 5VDC 2-1393789-0 V23079-H1202-B301 6VDC 2-1393789-1 V23079-H1206-B301 9VDC 2-1393789-3 V23079-H1203-B301 12VDC 8-1393788-3 V23079-H1205-B301 24VDC 2-1393789-2 V23079-J1108-B301 Bistable, 1 coil 3VDC 2-1393789-9 V23079-J1111-B301 4.5VDC 3-1393789-0 V23079-J1101-B301 5VDC 2-1393789-5 V23079-J1102-B301 6VDC 2-1393789-6 V23079-J1103-B301 12VDC 2-1393789-7 V23079-J1105-B301 24VDC 2-1393789-8 V23079-G2008-X079 High dielectric Monostable 3VDC 1422006-5 V23079-G2001-X071 Overmolded 5VDC 1422006-1 V23079-G2002-X072 6VDC 1422006-2 V23079-G2006-X073 9VDC 1422006-3 V23079-G2003-X074 12VDC 1422006-4 V23079-A2003-X074 12VDC 1422025-7 V23079-A2008-X079 3VDC 1-1422025-1