142-0701-631 EMERSON-NETWORKPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
50 Ohm SMA
4-Hole Flange Mount Jack Receptacle - Flush Dielectric VSWR: N/A 0-18 GHz 142-0701-631 142-0701-636 VSWR & FREQ. RANGE GOLD PLATED NICKEL PLATED Emerson Network Power Connectivity Solutions 299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 (507) 833-8822 • www.EmersonConnectivity.com
INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST Impedance: 50 ohms Frequency Range: Straight semi-rigid cable connectors and VSWR: (f = GHz) Straight Right Angle Cabled Connectors Cabled Connectors Working Voltage: (Vrms maximum)□ Connectors for Cable Type Sea Level 70K Feet RG-58, RG-142, LMR-240, .086 semi-rigid, uncabled receptacles, .141 semi-rigid w/o contact ... 335 85 Dielectric Withstanding Voltage: (VRMS minimum at sea level)□ Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid, Corona Level: (Volts minimum at 70,000 feet)□ Connectors for RG-58, RG-142, LMR-240, 086 semi-rigid, ELECTRICAL RATINGS Insertion Loss: (dB maximum) Straight flexible cable connectors Right angle flexible cable Straight semi-rigid cable Right angle semi-rigid cable Straight semi-rigid cable Straight low loss flexible Right Angle low loss flexible Insulation Resistance: 5000 megohms minimum Contact Resistance: (milliohms maximum) Initial After Environmental Center contact (straight cabled connectors Center contact (right angle cabled *N/A where the cable center conductor is used as a contact RF Leakage: (dB minimum, tested at 2.5 GHz) Flexible cable connectors, adapters and .141 semi-rigid .086 semi-rigid connectors and .141 semi-rigid connectors RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4 and 7 MHz)□ Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid, Power Rating (Dummy Load): 0.5 watt @ + 25° C, derated to 0.25 watt @ +125° C Temperature Range: - 65° C to + 165° C Thermal Shock: MIL-STD-202, Method 107, Condition B Corrosion: MIL-STD-202, Method 101, Condition B ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012) Cable Retention: Axial Force*(lbs) Torque (in-oz) *Or cable breaking strength whichever is less. Durability: 500 cycles minimum 100 cycles minimum for .141 semi-rigid connectors w/o contact Engagement Design: MIL-C-39012, Series SMA Engagement/Disengagement Force: 2 inch-pounds maximum Mating Torque: 7 to 10 inch-pounds Bulkhead Mounting Nut Torque: 15 inch-pounds Coupling Proof Torque: 15 inch-pounds minimum Coupling Nut Retention: 60 pounds minimum Contact Retention: 6 lbs. minimum axial force (captivated contacts) 4 inch-ounce minimum torque (uncabled receptacles) MECHANICAL RATINGS Shock: MIL-STD-202, Method 213, Condition I Vibration: MIL-STD-202, Method 204, Condition D Moisture Resistance: MIL-STD-202, Method 106 SMA - 50 Ohm Connectors Specifications †Avoid user injury due to misapplication. See safety advisory definitions inside front cover. Emerson Network Power Connectivity Solutions 299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 (507) 833-8822 • www.EmersonConnectivity.com
INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST MATERIAL SPECIFICATIONS Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290 Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min. Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003" min. Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or Tefzel per ASTM D 3159 or PFA 340 per ASTM Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290 Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290 Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290 Seal Rings: Silicone rubber per ZZ-R-765 EMI Gaskets: Conductive silicone rubber per MIL-G-83528, Type M * All gold plated parts include a .00005" min. nickel underplate barrier layer. NOTES 1. ID OF CONTACT TO MEET VSWR, CONTACT RESISTANCE AND INSERTION WITHDRAWAL FORCES WHEN MATED WITH DIA .0355-.0370 MALE PIN. Mating Engagement for SMA Series per MIL-C-39012 SMA - 50 Ohm Connectors Specifications JACK PLUG JACKPLUG Emerson Network Power Connectivity Solutions 299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 (507) 833-8822 • www.EmersonConnectivity.com