13605 DESCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 DRAWING NUMBER 13605 DATE: June 2019 © 2019 DESCO INDUSTRIES INC Employee Owned STATSHIELD® BAG, SHIELDING, METAL-IN CONSTRUCTION, ZIPPER, 3.0 MIL (0.07mm) STATSHIELD® METAL-IN SERIES Specifications: Standard Document Meets Requirements of: ANSI/ESD S541 (ANSI/ESD S20.20) ESD Protective Packaging ANSI/ESD S11.4 Level 3 Technical Requirements Electrical Properties Typical Values Test Procedures/Method Surface Resistance: Outer Surface 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11 Inner Surface 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11 Discharge Shielding <20 nJ ANSI/ESD STM11.31, EIA 541 Charge Generation Teflon: 0.09 nC/sq. in. Modified Incline Plane Quartz: 0.01 nC/sq. in. Modified Incline Plane Capacitance Probe (to dissipate 1 KV) <30 volts ANSI/EIA-541/Appendix E, 1kV Discharge Physical Properties Film Thickness Nominal 3.0 mil (0.07mm) ±10% MIL-STD-3010, 1003 Width (Inside Dimensions) Nominal -0" / + 0.250" Length (Inside Dimensions) Nominal ± 0.125", Offset 0 to 1/4" Light Transmission >40% (Tobias) ASTM D-1003 Heat Seal >10 lbs/in 375°F, 1/2 sec 60 psi Tensile Strength 4600 PSI, 32 MPa ASTM 882 Puncture Resistance >10 lbs MIL-STD-3010, 2065 Silicone Not detected FTIR Marking Adhesion Pass IPC-TM-650 2.4.1 Specifications and procedures subject to change without notice. Side Weld Seals 0.375" (±0.10") Low Charging Clear Zipper Date & Lot Code Printed for QC Traceablility Mixed Unsortable Plastic Scrap Mixed unsortable plastic scrap shall contain assorted plastics of multiple grades that are co-extruded, bonded or laminated together which are unsortable into individual grades Desco’s bags are recyclable Low Charging Static Dissipative Proprietary Outer Polyester Layer Aluminum Shielding Layer Low Charging Static Dissipative Proprietary Inner Polyethylene Layer Statshield® bags are packaged 100 per package in an oversized shielding bag. See Shielding Bag Storage at TB-7057. Statshield® and Statfree® are Registered Trademarks of Desco Industries Inc. See Bag Selection Chart Click HERE ANSI/ESD S541 Section 6.2 Outside an EPA “Transportation of sensitive products outside of an EPA shall require packaging that provides: 1. Low charge generation 2. Dissipative or conductive materials for intimate contact 3. A structure that provides electrostatic discharge shielding.” Made in the United States of America Weld Seal Soft Fold Bottom RoHS, REACH, and Conflict Minerals Statement: See RoHS, REACH, and Conflict Minerals Statement at Desco.com. Limited Warranty See Desco’s Limited Warranty at Desco.com Lip 1" (±0.125")