135W DBLECTRO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
The 135W Series consists of mercury contacts and achieved a high breakdown voltage rate of 10KV. This series is used for applications requiring less mechanical bouncing, such as ESD test. We also offer a low cost version in this series. Please contact our sales engineers for more details. 135W Series 135W-1A30N0 High Breakdown Voltage Wetted Mercury Parameters Units 1 Form A Test Condition Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage VDC Ω VDC Max VDC Min 24.0 300 19.2 2.4 ±10% @ 20˚C 15˚C to 35˚C 15˚C to 35˚C Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability Volts Amps Amps Watts x106 Cycle mΩ mΩ 10000 5.0 10.0 250 1000 2.0 Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage Relay Specifications Insulation Resistance Dielectric Strength Operate Time (No Bounce) Release Time Ω Min VDC Min VDC Min msec Max msec Max 1010 10000 10000 10.0 6.0 Between all isolated pins @ 1000V 20˚C 40%RH Between contacts Contacts to coil @ nominal coil voltage 20Hz square wave Diode suppression Environmental Ratings Measurement Reference Conditions Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa Storage temp: -20˚C to +80˚C Operate temp: -10˚C to +60˚C Vibration: 20G’s to 2000Hz Shock: 50G’s High Breakdown Voltage
(85.7)(2.0)(150) (15.0) (2.0) (150) (2- 4.5) (200) (2- 0.27) (75.0) (2.0)(15.5) (10.0) (24.0) (19.7) (16.0) (34.7) (15.0) High Voltage cable 0.591 7.874 M I N2.953 +0.012 -0.012 0.61 0.0790.394 +0.079 -0.079 1.366 0.945 +0.012 -0.012
0.776 MAX
0.63 0.591 2- 0.177 2- 0.011 2- 0.138 2- 3.5 Heat Resistant Vinyl Wire (10.0) (18.2) 0.394 +0.079 -0.079
0.717 MAX
(10.0) 1 2 P1 P2 UP 135W-1A30N0 UP Note: Hg wet contacts must be mounted within 30 of vertical plane.