135D147X0006F2

135D VISHAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation 135D Vishay www.vishay.com For technical questi ons, contact: tantalum@vishay.com Document Number: 40024

FEATURES

• Terminations: standard tin/lead (SnPb), 100 % Tin (RoHS compliant) available
• Standard and extended ratings
• Model 135D tantalum-case electrolytic capacitors incorporate the advantages of all the varieties of electrolytic capacitors and eliminate most of the disadvantages. These units have a 3 volt reverse voltage capability at + 85 °C and a higher ripple current capability than any other electrolytic type with similar combinations of capacitance and case size.
• Designed for the aerospace applications, this capacitor was developed under partial sponsorship of the Marshall Space Flight Center, National Aeronautics and Space Administration. The capacitors have a high resistance to damage from shock and vibration. Extended range ratings and high temperature designs areavailable.
• Model 135D capacitors are commercial equivalents of Tansitor Style; AQ, AR, HA Q, HAR, Mallory-NACC Style; TLT, TXT, THT, THX and Military Style CLR79 and CLR81, designed to meet the performance requirements of Military Specification MIL-PRF-39006/2 2/25. Capacitors to meet MILPRF- 39006/22/25 should be ordered by part numbers shown in that specification. PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C. (To + 200 °C with voltage derating.) Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 % standard. ± 10 %, ± 5 % available as special. DC Leakage Current (DCL Max.): At + 25 °C and above: Leakage current shall not exceed the values listed in the Standard Ratings Tables. Life Test: Capacitors are capable of withstanding a 2000 h life test at a temperature of + 85 °C or + 125 °C at the applicable rated DC working voltage. Following life test: 1. DCL, measured at + 85 °C rated voltage, shall not be in excess of the original requirement. 2. The equivalent series resistance shall not exceed 150 % of the initial requirement. 3. Change in capacitance shall not exceed 10 % from the initial measurement. * Pb containing terminations are not RoHS compliant, exemptions may apply Available Pb-free RoHS* COMPLIANT

ORDERING INFORMATION

MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C CASE CODE STYLE NUMBER RoHS COMPLIANT This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow X0 = ± 20 % X9 = ± 10 % X5 = ± 5 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V) See Ratings and Case Codes Table Standard 0 = No outer tube. 2 = Outer polyesterfilm insulation. High Temperature 8 = No outer tube. 6 = High temperature film insulation (above + 125 °C) E3 = 100 % tin termination (RoHS compliant design) Blank = SnPb termination (standard design) Note Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to the unit weight.

Document Number: 40024 For technical questions, contact: tantalum@vishay.com www.vishay.com Revision: 10-Oct-08 43 135D Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation Vishay DIMENSIONS in inches [millimeters] CASE CODE DL 1 L2 (Max.) E WEIGHT (g) (Max.) TYPE 135D DCLR 79/81 EQUIV. C T1 0.188 ± 0.016 [4.78 ± 0.41] 0.453 + 0.031 - 0.016 0.734 [18.64] 1.500 ± 0.250 [38.10 ± 6.35] 2.6 F T2 0.281 ± 0.016 [7.14 ± 0.41] 0.641 + 0.031 - 0.016 0.922 [23.42] 2.250 ± 0.250 [57.15 ± 6.35] 6.2 T T3 0.375 ± 0.016 [9.53 ± 0.41] 0.766 + 0.031 - 0.016 1.047 [26.59] 2.250 ± 0.250 K T4 0.375 ± 0.016 [9.53 ± 0.41] 1.062 + 0.031 - 0.016 1.343 [34.11] 2.250 ± 0.250 Note *For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body. EL 1 E WELD TANTALUM (NO. 22 AWG TINNED NICKEL LEADS) SOLDERABLE AND WELDABLE D STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* MAX. ESR at + 25 °C 120 Hz MAX. IMP. at - 55 °C 120 Hz MAX. DCL (µA) at MAX. CAPACITANCE CHANGE (%) at MAX. RIPPLE 40 kHz Irms + 25 °C + 85 °C + 125 °C - 55 °C + 85 °C + 125 °C 30 C 135D306X0006C2 4.0 100 1.0 2.0 - 40 + 10.5 + 12 820 68 C 135D686X0006C2 3.2 60 1.0 2.0 - 40 + 14 + 16 960 140 F 135D147X0006F2 2.0 40 1.0 3.0 - 40 + 14 + 16 1200 270 F 135D277X0006F2 2.2 25 1.0 6.5 - 44 + 17.5 + 20 1375 330 T 135D337X0006T2 1.4 20 2.0 7.9 - 44 + 14 + 16 1800 560 T 135D567X0006T2 1.3 25 2.0 13.0 - 64 + 17.5 + 20 1900 1200 K 135D128X0006K2 1.0 20 3.0 14.0 - 80 + 25 + 25 2265 25 C 135D256X0008C2 4.0 100 1.0 2.0 - 40 + 10.5 + 12 820 56 C 135D566X0008C2 3.3 59 1.0 2.0 - 40 + 14 + 16 900 120 F 135D127X0008F2 2.6 50 1.0 2.0 - 44 + 17.5 + 20 1230 220 F 135D227X0008F2 2.4 30 1.0 7.0 - 44 + 17.5 + 20 1370 290 T 135D297X0008T2 1.8 25 2.0 6.0 - 64 + 17.5 + 20 1770 430 T 135D437X0008T2 1.4 25 2.0 14.0 - 64 + 17.5 + 20 1825 850 K 135D857X0008K2 1.0 22 4.0 16.0 - 80 + 25 + 25 2330 20 C 135D206X0010C2 4.0 120 1.0 2.0 - 32 + 10.5 + 12 820 47 C 135D476X0010C2 3.7 90 1.0 2.0 - 36 + 14 + 16 855 100 F 135D107X0010F2 2.4 60 1.0 4.0 - 36 + 14 + 16 1200 180 F 135D187X0010F2 2.2 40 1.0 7.0 - 36 + 14 + 16 1365 250 T 135D257X0010T2 1.8 30 2.0 10.0 - 40 + 14 + 16 1720 390 T 135D397X0010T2 1.5 25 2.0 16.0 - 64 + 17.5 + 20 1800 750 K 135D757X0010K2 1.0 23 4.0 16.0 - 80 + 25 + 25 2360 15 C 135D156X0015C2 4.4 155 1.0 2.0 - 24 + 10.5 + 12 780 33 C 135D336X0015C2 4.0 90 1.0 2.0 - 28 + 14 + 16 820 70 F 135D706X0015F2 2.8 75 1.0 4.0 - 28 + 14 + 16 1150 120 F 135D127X0015F2 2.6 50 1.0 7.0 - 28 + 17.5 + 20 1450 170 T 135D177X0015T2 2.4 35 2.0 10.0 - 32 + 14 + 16 1480 270 T 135D277X0015T2 2.2 30 2.0 16.0 - 56 + 17.5 + 20 1740 540 K 135D547X0015K2 1.0 23 6.0 24.0 - 80 + 25 + 25 2330 Note * Part Numbers listed are for units with ± 20 % capacitance tole rance insulated capacitors. For ± 10 % tolerance capacitors, ch ange the digit following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from “2” to “6”. For RoHS compliant add “E3”.

www.vishay.com For technical questi ons, contact: tantalum@vishay.com Document Number: 40024 135D Vishay Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* MAX. ESR at + 25 °C 120 Hz MAX. IMP. at - 55 °C 120 Hz MAX. DCL (µA) at MAX. CAPACITANCE CHANGE (%) at MAX. RIPPLE 40 kHz rms + 25 °C + 85 °C + 125 °C - 55 °C + 85 °C + 125 °C 10 C 135D106X0025C2 5.3 220 1.0 2.0 - 16 + 8 + 9 715 22 C 135D226X0025C2 4.2 140 1.0 2.0 - 20 + 10.5 + 12 800 50 F 135D506X0025F2 3.0 70 1.0 2.0 - 28 + 13 + 15 1130 100 F 135D107X0025F2 2.8 50 1.0 10.0 - 28 + 13 + 15 1435 120 T 135D127X0025T2 2.6 38 2.0 6.0 - 32 + 13 + 15 1450 180 T 135D187X0025T2 2.2 32 2.0 18.0 - 48 + 13 + 15 1525 350 K 135D357X0025K2 1.3 24 7.0 28.0 - 70 + 25 + 25 1970 8 C 135D805X0030C2 6.6 275 1.0 2.0 - 16 + 8 + 12 640 15 C 135D156X0030C2 6.2 175 1.0 2.0 - 20 + 10.5 + 12 780 40 F 135D406X0030F2 4.0 65 1.0 5.0 - 24 + 10.5 + 12 1120 68 F 135D686X0030F2 2.9 60 1.0 8.0 - 24 + 13 + 15 1285 100 T 135D107X0030T2 2.7 40 2.0 12.0 - 28 + 10.5 + 12 1450 150 T 135D157X0030T2 2.3 35 2.0 18.0 - 48 + 13 + 15 1525 300 K 135D307X0030K2 1.4 25 8.0 32.0 - 60 + 25 + 25 1950 15 C 135D156X0035C2 6.2 175 0.75 1.5 - 20 + 10.5 + 12 660 68 F 135D686X0035F2 2.9 60 1.0 2.0 - 24 + 13 + 15 1195 270 K 135D277X0035K2 1.4 26 3.0 12.0 - 58 + 25 + 25 1950 5 C 135D505X0050C2 8.0 400 1.0 2.0 - 16 + 5 + 6 580 10 C 135D106X0050C2 6.4 250 1.0 2.0 - 24 + 8 + 9 715 25 F 135D256X0050F2 4.6 95 1.0 5.0 - 20 + 10.5 + 12 1005 47 F 135D476X0050F2 3.7 70 1.0 9.0 - 28 + 13 + 15 1155 60 T 135D606X0050T2 2.9 45 2.0 12.0 - 16 + 10.5 + 12 1335 82 T 135D826X0050T2 2.5 45 2.0 16.0 - 32 + 13 + 15 1400 160 K 135D167X0050K2 1.5 27 8.0 32.0 - 50 + 25 + 25 1900 4 C 135D405X0060C2 9.3 550 1.0 2.0 - 16 + 5 + 6 525 8.2 C 135D825X0060C2 6.6 275 1.0 2.0 - 24 + 8 + 9 625 20 F 135D206X0060F2 4.7 105 1.0 5.0 - 16 + 8 + 9 930 39 F 135D396X0060F2 3.4 90 1.0 9.0 - 28 + 10.5 + 15 1110 50 T 135D506X0060T2 2.9 50 2.0 12.0 - 16 + 10.5 + 12 1330 68 T 135D686X0060T2 2.5 50 2.0 16.0 - 32 + 10.5 + 15 1365 140 K 135D147X0060K2 1.5 28 8.0 32.0 - 40 + 20 + 20 1850 3.5 C 135D355X0075C2 9.5 650 1.0 2.0 - 16 + 5 + 6 525 6.8 C 135D685X0075C2 6.8 300 1.0 2.0 - 20 + 8 + 9 610 15 F 135D156X0075F2 5.3 150 1.0 5.0 - 16 + 8 + 9 890 33 F 135D336X0075F2 4.2 90 1.0 10.0 - 24 + 10.5 + 15 1000 40 T 135D406X0075T2 3.0 60 2.0 12.0 - 16 + 10.5 + 12 1250 56 T 135D566X0075T2 2.6 60 2.0 17.0 - 28 + 10.5 + 15 1335 110 K 135D117X0075K2 1.5 29 9.0 36 .0 - 35 + 20 + 20 1850 2.5 C 135D255X0100C2 10.6 950 1.0 2.0 - 16 + 7 + 8 505 4.7 C 135D475X0100C2 8.5 500 1.0 2.0 - 16 + 7 + 8 565 11 F 135D116X0100F2 6.0 200 1.0 4.0 - 16 + 7 + 8 835 22 F 135D226X0100F2 4.8 100 1.0 9.0 - 16 + 7 + 8 965 25 T 135D256X0125T2 3.2 93 2.0 13.0 - 16 + 7 + 8 1200 30 T 135D306X0100T2 3.3 80 2.0 12.0 - 16 + 7 + 8 1240 43 T 135D436X0100T2 2.6 70 2.0 17.0 - 20 + 7 + 8 1335 56 K 135D566X0125K2 1.6 32 10.0 40.0 - 25 + 15 + 15 1800 86 K 135D866X0100K2 1.6 30 9.0 36.0 - 25 + 15 + 15 1800 Note * Part Numbers listed are for units with ± 20 % capacitance tole rance insulated capacitors. For ± 10 % tolerance capacitors, ch ange the digit following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from “2” to “6”. For RoHS compliant add “E3”.

Document Number: 40024 For technical questions, contact: tantalum@vishay.com www.vishay.com Revision: 10-Oct-08 45 135D Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation Vishay CAPACITANCE (µF) CASE CODE PART NUMBER* MAX. ESR at + 25 °C 120 Hz MAX. IMP. at - 55 °C 120 Hz MAX. DCL (µA) at MAX. CAPACITANCE CHANGE (%) at MAX. RIPPLE 40 kHz rms + 25 °C + 85 °C + 125 °C - 55 °C + 85 °C + 125 °C 1.7 C 135D175X0125C2 15.6 1250 1.0 2.0 - 16 + 7 + 8 415 3.6 C 135D365X0125C2 10.0 600 1.0 2.0 - 16 + 7 + 8 520 9 F 135D905X0125F2 7.4 240 1.0 5.0 - 16 + 7 + 8 755 14 F 135D146X0125F2 5.7 167 1.0 7.0 - 16 + 7 + 8 860 18 T 135D186X0125T2 3.7 129 2.0 9.0 - 16 + 7 + 8 1130 Note * Part Numbers listed are for units with ± 20 % capacitance tole rance insulated capacitors. For ± 10 % tolerance capacitors, ch ange the digit following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from “2” to “6”. For RoHS compliant add “E3”. STANDARD RATINGS EXTENDED RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* MAX. ESR at + 25 °C 120 Hz MAX. IMP. at - 55 °C 120 Hz MAX. DCL (µA) at MAX.. CAPACITANCE CHANGE (%) at MAX. RIPPLE 40 kHz rms + 25 °C + 85 °C + 125 °C - 55 °C + 85 °C + 125 °C 220 C 135D227X0006C2 3.0 36 2 9 - 64 + 13 + 16 1000 560 F 135D567X0006F2 2.5 21 3 9 - 77 + 16 + 20 1500 820 F 135D827X0006F2 2.5 18 3 14 - 88 + 16 + 20 1500 1200 T 135D128X0006T2 1.5 18 5 18 - 88 + 20 + 25 1900 1500 T 135D158X0006T2 1.5 18 5 20 - 90 + 20 + 25 1900 2200 K 135D228X0006K2 1.0 13 6 24 - 90 + 25 + 30 2300 180 C 135D187X0008C2 3.0 45 2 9 - 60 + 13 + 16 1000 680 F 135D687X0008F2 2.5 22 3 14 - 83 + 16 + 20 1500 1500 T 135D158X0008T2 1.5 18 5 20 - 90 + 20 + 25 1900 1800 K 135D188X0008K2 1.0 14 7 25 - 90 + 25 + 30 2300 120 C 135D127X0010C2 3.2 54 2 6 - 40 + 14 + 16 900 150 C 135D157X0010C2 3.0 54 2 9 - 55 + 13 + 16 900 390 F 135D397X0010F2 2.5 27 3 9 - 66 + 16 + 20 1450 560 F 135D567X0010F2 2.5 27 3 16 - 77 + 16 + 20 1450 1200 T 135D128X0010T2 1.5 18 5 20 - 88 + 20 + 25 1850 1500 K 135D158X0010K2 1.0 15 7 25 - 88 + 25 + 30 2300 82 C 135D826X0015C2 3.9 72 2 6 - 35 + 12 + 16 900 100 C 135D107X0015C2 3.9 72 2 9 - 44 + 13 + 16 900 270 F 135D277X0015F2 2.5 31 3 9 - 62 + 16 + 15 1450 390 F 135D397X0015F2 2.5 31 3 16 - 66 + 16 + 20 1450 680 T 135D687X0015T2 1.8 22 6 18 - 74 + 20 + 25 1800 820 T 135D827X0015T2 1.8 22 6 24 - 77 + 20 + 25 1800 1000 K 135D108X0015K2 1.2 17 8 32 - 77 + 25 + 30 2330 56 C 135D566X0025C2 4.3 90 2 6 - 25 + 12 + 15 850 68 C 135D686X0025C2 4.3 90 2 9 - 40 + 12 + 15 850 180 F 135D187X0025F2 2.7 33 3 9 - 54 + 13 + 15 1400 270 F 135D277X0025F2 2.7 33 3 16 - 62 + 13 + 16 1400 470 T 135D477X0025T2 1.8 24 6 18 - 65 + 18 + 25 1750 560 T 135D567X0025T2 1.8 24 7 28 - 72 + 20 + 25 1750 680 K 135D687X0025K2 1.2 19 8 32 - 72 + 25 + 30 2100 Note * Part Numbers listed are for units with ± 20 % capacitance tole rance insulated capacitors. For ± 10 % tolerance capacitors, ch ange the digit following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from “2” to “6”. For RoHS compliant add “E3”.

www.vishay.com For technical questi ons, contact: tantalum@vishay.com Document Number: 40024 135D Vishay Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation EXTENDED RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* MAX. ESR at + 25 °C 120 Hz MAX. IMP. at - 55 °C 120 Hz MAX. DCL (µA) at MAX. CAPACITANCE CHANGE (%) at MAX. RIPPLE 40 kHz rms + 25 °C + 85 °C + 125 °C - 55 °C + 85 °C + 125 °C 47 C 135D476X0030C2 5.2 100 2 6 - 23 + 12 + 15 800 56 C 135D566X0030C2 5.2 100 2 9 - 38 + 12 + 15 800 150 F 135D157X0030F2 2.5 36 3 9 - 42 + 13 + 15 1200 220 F 135D227X0030F2 2.5 36 3 16 - 60 + 13 + 16 1200 390 T 135D397X0030T2 1.8 25 6 18 - 55 + 18 + 25 1500 470 T 135D477X0030T2 1.8 25 8 32 - 65 + 20 + 25 1500 560 K 135D567X0030K2 1.3 20 9 36 - 65 + 25 + 30 2000 39 C 135D396X0035C2 4.1 61 2 6 - 22 + 12 + 14 820 120 F 135D127X0035F2 2.5 31 3 10 - 40 + 13 + 15 1315 330 T 135D337X0035T2 1.8 20 6 18 - 50 + 16 + 25 1640 370 K 135D477X0035K2 1.3 15 9 36 - 60 + 25 + 30 2040 33 C 135D336X0050C2 5.0 135 2 9 - 29 + 10 + 12 700 100 F 135D107X0050F2 2.8 49 4 12 - 36 + 13 + 15 1200 120 F 135D127X0050F2 2.5 49 4 24 - 42 + 12 + 15 1200 270 T 135D277X0050T2 2.0 30 8 32 - 46 + 20 + 25 1450 330 K 135D337X0050K2 1.5 30 9 36 - 46 + 25 + 30 1900 18 C 135C186X0060C2 7.0 160 2 12 - 20 + 7 + 8 700 27 C 135D276X0060C2 5.0 144 3 12 - 24 + 10 + 12 700 82 F 135D826X0060F2 2.9 54 4 16 - 30 + 15 + 15 1100 100 F 135D107X0060F2 2.5 54 4 20 - 36 + 12 + 15 1100 220 T 135D227X0060T2 1.8 29 8 32 - 40 + 16 + 20 1400 270 K 135D277X0060K2 1.4 23 9 36 - 45 + 20 + 25 1850 22 C 135D226X0075C2 5.1 157 3 12 - 19 + 10 + 12 600 68 F 135D686X0075F2 3.0 63 4 16 - 25 + 12 + 15 1000 82 F 135D826X0075F2 2.5 63 4 24 - 30 + 12 + 15 1000 180 T 135D187X0075T2 2.2 30 9 36 - 35 + 16 + 20 1300 220 K 135D227X0075K2 1.8 24 10 40 - 40 + 20 + 25 1800 10 C 135D106X0100C2 5.9 200 3 12 - 17 + 10 + 12 800 39 F 135D396X0100F2 3.5 80 5 24 - 20 + 12 + 15 1300 68 T 135D686X0100T2 2.2 40 10 40 - 30 + 14 + 16 1600 120 K 135D127X0100K2 2.7 30 12 48 - 35 + 15 + 17 2000 6.8 C 135D685X0125C2 11.7 300 3 12 - 14 + 10 + 12 700 27 F 135D276X0125F2 3.5 90 5 24 - 18 + 12 + 15 1200 47 T 135D476X0125T2 2.2 50 10 40 - 26 + 14 + 16 1500 68 K 135D686X0125K2 2.2 32 11 44 - 28 + 15 + 16 1850 82 K 135D826X0125K2 2.8 32 12 48 - 30 + 15 + 17 1900 Note * Part Numbers listed are for units with ± 20 % capacitance tole rance insulated capacitors. For ± 10 % tolerance capacitors, ch ange the digit following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from “2” to “6”. For RoHS compliant add “E3”.

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.