135-3801-201 EMERSON-NETWORKPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MMCX Straight Plug Receptacle PART NUMBER 135-3801-201 INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST Mounting Hole Layout Emerson Network Power Connectivity Solutions 299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 (507) 833-8822 • www.EmersonConnectivity.com
Impedance: 50 ohms VSWR: (f = GHz) Straight Right Angle Cabled Connectors Cabled Connectors Dielectric Withstanding Voltage: Connectors...500 Vrms at sea level† Insulation Resistance: 1000 megohms min Contact Resistance: (milliohms maximum) After Initial Environmental Center contact (straight cabled connectors Center contact (right angle cabled Insertion Loss: (dB max tested at 1 GHz) RF Leakage: (dB minimum, tested at 2.5 GHz) RF High Potential Withstanding Voltage: (400 Vrms at 4 and 7 MHz)† Power Rating (Dummy Load): - 0.5 watt @ +25° C, derated to 0.25 watt @ +125° C MECHANICAL RATINGS Engagement Design: Series MMCX Engagement/Disengagement Force: 8 lbs. max axial engagement 1.4 lbs. min axial disengagement Contact Retention: 2.0 lbs. minimum axial force Cable Retention: Axial Force* Torque (pounds) (in-oz) *Or cable breaking strength whichever is less. ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012) Thermal Shock: Connectors: MIL-STD-202, Method 107, Condition C, except -55° C to + 155° C (N/A dummy loads) Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads) Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads) Vibration: MIL-STD-202, Method 204, Condition D (N/A dummy loads) Moisture Resistance: MIL-STD-202, Method 106 (N/A dummy loads) MATERIAL SPECIFICATIONS Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. Contacts: Beryllium copper per QQ-C-530, gold plated* per MIL-G- 45204 .00003" min. Interface Spring: Beryllium copper per QQ-C-530, gold plated* per MIL-G-45204 .00003" min. Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-626, gold plated per MIL-G-45204 .00001" min. Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. *All gold plated parts include a .00005” min nickel barrier layer. †Avoid user injury due to misapplication. See safety advisory definitions inside front cover. MMCX - 50 Ohm Connectors Specifications Mating Engagement for MMCX Series 1. ID of contact to meet VSWR mating characteristics and connector durabil- ity when mated with a dia .016 +/- .001 male contact. 2. Must meet the force to engage and dis- engage when mated with mating part. JACK JACK PLUG PLUG Emerson Network Power Connectivity Solutions 299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • +1 (507) 833-8822 • www.EmersonConnectivity.com