132-09SM-L COILCRAFT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Maxi Spring™ Air Core Inductors Document 185-1 Document 185-1 Revised 10/29/08 Inductance2 Percent Q 2 Q2 Test freq. SRF min 4 DCR max5 Irms6 Part number1 Turns (nH) tolerance 3 typ min (MHz) (GHz) (mOhm) (A) 132-09SM_L_ 9 90 5,2 114 95 50 1.140 15 3.5 132-10SM_L_ 10 111 5,2 104 87 50 1.020 15 3.5 132-11SM_L_ 11 130 5,2 104 87 50 0.900 20 3.0 132-12SM_L_ 12 169 5,2 114 95 50 0.875 25 3.0 132-13SM_L_ 13 206 5,2 114 95 50 0.800 30 3.0 132-14SM_L_ 14 222 5,2 110 92 50 0.730 35 3.0 132-15SM_L_ 15 246 5,2 114 95 50 0.685 35 3.0 132-16SM_L_ 16 307 5,2 114 95 50 0.660 35 3.0 132-17SM_L_ 17 380 5,2 114 95 50 0.590 50 2.5 132-18SM_L_ 18 422 5,2 114 95 50 0.540 60 2.5 132-19SM_L_ 19 491 5,2 114 95 50 0.535 65 2.0 132-20SM_L_ 20 538 5,2 104 87 50 0.490 90 2.0 1. When ordering, specify tolerance, termination and packaging codes: 132-20SMGLD Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Tolerance: G =2 % J = 5% Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (800 parts per full reel). B = Less than full reel. In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance and Q tested on the Agilent/HP 4291A with the 16193 fixture and correlation. 3. Tolerances in bold are stocked for immediate shipment. 4. SRF tested on the Agilent/HP 8753D and the SMD-D test fixture. 5. DCR tested on the Cambridge Technology Model 510 Micro Ohmmeter. 6. Current that causes a 15°C temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. See Qualification Standards section for environmental and test data. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Weight 0.42 – 0.59 g Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)+5 to +70 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 800/13″ reel Plastic tape: 24 mm wide, 0.3 mm thick, 12 mm pocket spacing, 6.1 mm pocket depth PCB washing Only pure water or alcohol recommended  Air core inductors feature higher Q, L and current ratings  Rigid package provides a flat surface for pick and place  Leads are locked in position for precise terminal spacing

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Document 185-2 Document 185-2 Revised 10/29/08 Maxi Spring™ Air Core Inductors Typical L vs Frequency Typical Q vs Frequency 1 10 Frequency (MHz) Inductance (nH) 100 1000 90 nH 246 nH 422 nH 169 nH 1000 900 800 700 600 500 400 300 200 100 11 0 Frequency (MHz) Q factor 100 1000 90 nH 246 nH 422 nH 169 nH 250 200 150 100 135° max 0° min Recommended Land Pattern Strip Length 0.095 2,42 0.185 4,70 0.080 2,04 0.314 7,98 A max B max C max D E 0.226 ±0.003 10,55 6,60 5,97 5,74 ±0,08 7,98 ±0,51 E B D C A -40 -20 0 20 40 60 80 100 140 120 Ambient temperature (°C) 120 110 100 Percent of rated rms I 25°C Typical Irms Derating Dimensions are in inches mm Designer’s Kit C319 contains 8 each of all 5% values. Designer’s Kit C319-2 contains 8 each of all 2% values.