1315050930002 WURTH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 13

Technical content

Dimensions: [mm] 0,9 ±0,2 3,2 ±0,2 1,0 ±0,2 3,4 ±0,2 5,4 ±0,2 5,0 ±0,2 1,45 ±0,2 1,58 ±0,2 0,67 ±0,2 5,0 ±0,2 Orientation mark Scale - 5:1 Recommended Land Pattern: [mm] 1,3 3,1 1,3 1,172,031,1714 Scale - 5:1 Pin Configuration: VSS1 DOUT4 VDD3DIN2 Scale - 5:1 Absolute Maximum Ratings (Ambient Temperature 25°C): Properties Value Unit Power Dissipation PDiss 240 mW Supply Voltage VSupply 5.5 V IC Output Current IF,IC 14.5 mA ESD Threshold/ Human Body Model VESD HBM 4000 V Junction Temperature LED TJ 115 °C Packaging Properties: Chip Technology AlInGaP + InGaN Emitting Color Green & Red & Blue Packaging PLCC4 Top view Lens Color Diffused Plastic Housing Color White General Information: Operating Temperature -40 °C up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Storage Conditions (for single parts) -40 °C up to +100 °C Moisture Sensitivity Level (MSL) 3 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1

74638 Waldenburg

Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m

DESCRIPTION

WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 1/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Optical Properties: Properties Test conditions Value Unit min. typ. Peak Wavelength (Red) λPeak R VDD = 5V, VSS = 0V Bit Code: 0x00FF00 C = 100nF 630 nm Peak Wavelength (Green) λPeak G VDD = 5V, VSS = 0V Bit Code: 0xFF0000 C = 100nF 520 nm Peak Wavelength (Blue) λPeak B VDD = 5V, VSS = 0V Bit Code: 0x0000FF C = 100nF 465 nm Dominant Wavelength (Red) λDom R VDD = 5V, VSS = 0V Bit Code: 0x00FF00 C = 100nF 625 nm Dominant Wavelength (Green) λDom G VDD = 5V, VSS = 0V Bit Code: 0xFF0000 C = 100nF 525 nm Dominant Wavelength (Blue) λDom B VDD = 5V, VSS = 0V Bit Code: 0x0000FF C = 100nF 470 nm Luminous Intensity (Red) IV R VDD = 5V, VSS = 0V Bit Code: 0x00FF00 C = 100nF 280 450 mcd Luminous Intensity (Green) IV G VDD = 5V, VSS = 0V Bit Code: 0xFF0000 C = 100nF 900 1300 mcd Luminous Intensity (Blue) IV B VDD = 5V, VSS = 0V Bit Code: 0x0000FF C = 100nF 150 260 mcd Spectral Bandwidth (Red) Δλ R VDD = 5V, VSS = 0V Bit Code: 0x00FF00 C = 100nF 14 nm Spectral Bandwidth (Green) Δλ G VDD = 5V, VSS = 0V Bit Code: 0xFF0000 C = 100nF 28 nm Spectral Bandwidth (Blue) Δλ B VDD = 5V, VSS = 0V Bit Code: 0x0000FF C = 100nF 18 nm Viewing Angle Phi 0° 2θ50% 120 ° Electrical Properties: Properties Value Unit min. typ. max. Operating supply voltage VDD 3.5 5 5.5 V Digital input voltage - high-level VIH 0.7 * VDD VDD Digital input voltage - low-level VIL 0.3 * VDD Digital output voltage - high- level VOH 0.9 * VDD Digital output voltage - low-level VOL 0.1 * VDD IC Output Current IF,IC 13 14.5 mA IC Standby Current IDD,OFF 1 mA Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] Photobiological Safety Low Risk [ IEC 62471:2006 ] Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 2/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Schematic: IC G RB VDD DIN DOUT VSS 2 4

1 Switching Characteristics:

V t V t V t 100% 50% 100% 50% 90% 10% tR tPLH tPHL tF Min. Typ. Max. Frequency of the PWM fPWM 2.5 kHz Transmission Delay Low to High tPLH DIN to DOUT 150 ns Transmission Delay High to Low tPHL DIN to DOUT 150 ns Rise Time tR 50 ns Fall Time tF 50 ns Properties Symbol Test conditions Value Unit Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 3/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Data Transfer Time: Properties Symbol Test conditions Value Unit Min. Typ. Max. Bit Period T 1250 ns Bit 0 High Pulse T0H 320 350 400 ns Bit 0 Low Pulse T0L 800 900 ns Bit 1 High Pulse T1H 640 750 800 ns Bit 1 Low Pulse T1L 350 400 ns Reset Pulse Treset 200 μs Sequence Chart: Reset code V(V) t V(V) t V(V) t Bit 1 Bit 0 1 0 G5 G4 G3 G2 G1 G0 R7 R6 R5 R4 R3 R2 R1 R0 B7 B6 B5 B4 B3 B2 B1 B0 T1H T0H T1L T0L T T Treset Treset is not to scale. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 4/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Data Transmission Method: D"N" "N" 24 bits First 24 bits Reset Code >200μs Second 24 bits First 24 bits Second 24 bits Second 24 bits Second 24 bits"N" 24 bits "N" 24 bits "N" 24 bits "N" 24 bits "N" 24 bits G7 G6 G5 G4 G3 G2 G1 G0 R7 R6 R5 R4 R3 R2 R1 R0 B7 B6 B5 B4 B3 B2 B1 B0 24-bit data composition ... ... ... ... ... The information of each LED is transmitted with Most Significant Bit (MSB) first. Typical Application Circuit: VSS DOUT DIN VDD VSS DOUT DIN VDD VSS DOUT DIN VDD Microcontroller GND VDD DOUT Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 5/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Viewing Angle: 100 100 100 0° 10° 20° 30° 40° 45° 50° 60° 70° 80° 90° -45-90 Relative Luminous Intensity (%) - 60° Spectral: 100 400 450 500 550 600 650 700 750 Relative Intensity [%] Wavelength [nm] Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 6/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Typical luminous intensity vs. Bit Code: 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 0 15 30 45 60 75 90 105 120 135 150 165 180 195 210 225 240 255 Luminous Intensity [mcd] Bit Code Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 7/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Packaging Specification - Tape: [mm] End Feeding direction Start T Carrier Tape Top Cover Tape F E1 E2 W No Component min.160mm Components No Component min.100mm Cover Tape Cover Tape min. 400mm Orientation mark A A Packaging is referred to the international standard IEC 60286-3:2019 Tape Type A0 (mm) (mm) W (mm) T (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) F (mm) Material Qty. (pcs.) Value 2a 5,15 5,60 12,00 0,20 0,10 2,10 1,85 4,00 8,00 2,00 1,50 1,50 1,75 10,25 5,50 Polystyrene 1000 165° - 180° Pull-off force Tape width 12 mm 0,1 N - 1,3 N Packaging Specification - Reel: [mm] B D C A N close to center detail B Chip Cavity Sprocket Hole Embossment Cover Tape B A (mm) B (mm) C (mm) D (mm) N (mm) (mm) (mm) (mm) (mm) Material Value 178,00 1,50 12,80 20,20 60,00 12,40 18,40 11,90 15,40 Polystyrene Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 8/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Classification Reflow Profile for SMT components: Time Temperature Tp tp tL tS Ts max Ts min TC –5°C TL Time 25°C to Peak Preheat Area Max. Ramp Up Rate Max. Ramp Down Rate Classification Reflow Soldering Profile: Profile Feature Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts max. 60 - 120 seconds Ramp-up Rate (TL to TP) 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature t p max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E Package Classification Reflow Temperature (Tc): Properties Volume mm³ <350 Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness < 1.6 mm 260 °C 260 °C 260 °C PB-Free Assembly | Package Thickness 1.6 mm - 2.5 mm 260 °C 250 °C 245 °C PB-Free Assembly | Package Thickness > 2.5 mm 250 °C 245 °C 245 °C Applied cycles 2 cycles max. refer to IPC/ JEDEC J-STD-020E Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 9/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Component Libraries: 3D_WL-ICLED_1315050930002 Cadence_WL-ICLED (24a) Eagle_WL-ICLED (24a) IGS_WL-ICLED_1315050930002 STP_WL-ICLED_1315050930002 Free Sample Order: Order free samples of this article directly here! Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 10/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Cautions and Warnings: The following conditions apply to all goods within the product series of Optoelectronic Components of Würth Elektronik eiSos GmbH & Co. KG: General:

  • This optoelectronic component is designed and manufactured for use in general electronic equipment.
  • Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.
  • Optoelectronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer
  • The optoelectronic component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved.
  • Do not drop or impact the components, the component may be damaged
  • Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.
  • The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products.
  • Unless Würth Elektroik has given its express consent, the customer is under no circumstances entitled to reverse engineer, disassemble or otherwise attempt to extract knowledge or design information from the optoelectronic component Product specific: Soldering
  • The solder profile must comply with the technical product specifications. All other profiles will void the warranty.
  • All other soldering methods are at the customers’ own risk.
  • The soldering pad pattern shown above is a general recommendation for the easy assembly of optoelectronic component. If a high degree of precision is required for the selected application (i.e. high density assembly), the customer must ensure that the soldering pad pattern is optimized accordingly. Cleaning and Washing:
  • Washing agents used during the production to clean the customer application might damage or change the characteristics of the optoelectronic component body, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product.
  • Using a brush during the cleaning process may break the optoelectronic component body. Therefore, we do not recommend using a brush during the PCB cleaning process. Potting:
  • If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the optoelectronic component body, pins or termination. Expansion could damage the components. We recommend a manual inspection after potting to avoid these effects. Storage Conditions:
  • A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.
  • Do not expose the optoelectronic component to direct sunlight.
  • The storage conditions in the original packaging are defined according to DIN EN 61760-2.
  • For a moisture sensitive component, the storage condition in the original packaging is defined according to IPC/JEDEC-J-STD-033. It is also recommended to return the optoelectronic component to the original moisture proof bag and reseal the moisture proof bag again.
  • The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Packaging:
  • The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. Handling:
  • Violation of the technical product specifications such as exceeding the nominal rated current, will void the warranty.
  • The product design may influence the automatic optical inspection.
  • Certain optoelectronic component surfaces consist of soft material. Pressure on the top surface has to be handled carefully to prevent negative influence to the function and reliability of the optoelectronic components.
  • ESD prevention methods need to be applied for manual handling and processing by machinery.
  • Resistors for protection are obligatory.
  • Luminaires in operation may harm human vision or skin on a photo-biological level. Therefore direct light impact shall be avoided.
  • In addition to optoelectronic components testing, products incorporating these devices have to comply with the safety precautions given in IEC 60825-1, IEC 62471 and IEC 62778
  • Please be aware that Products provided in bulk packaging may get bent and might lead to derivations from the mechanical manufacturing tolerances mentioned in our datasheet, which is not considered to be a material defect.Please be aware that Products provided in bulk packaging may get bent and might lead to derivations from the mechanical manufacturing tolerances mentioned in our datasheet, which is not considered to be a material defect. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1

Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 11/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Technical specification:

  • The typical and/or calculated values and graphics of technical parameters can only reflect statistical figures. The actual parameters of each single product, may differ from the typical and/or calculated values or the typical characteristic line.
  • On each reel, only one bin is sorted and taped. The bin is defined on intensity, chromaticity coordinate or wavelength and forward voltage.
  • In order to ensure highest availability, the reel binning of standard deliveries can vary. A single bin cannot be ordered. Please contact us in advance, if you need a particular bin sorting before placing your order.
  • Test conditions are measured at the typical current with pulse duration < 30ms.
  • Optical properties are measured according the CIE 127:2007 standard.
  • Wavelength tolerance under measurement conditions ± 2nm.
  • Optical intensity tolerance under measurement conditions ±15%.
  • Forward voltage tolerance under measurement conditions ± 0.1V.
  • CCT tolerance of x and y coordinate of ± 0.01 and CRI tolerance of ± 2 is allowed. In the characteristics curves, all values given in dotted lines may show a higher deviation than the parameters mentioned above. These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable. However, no responsibility is assumed for inaccuracies or incompleteness. The customer has the sole responsibility to ensure that he uses the latest version of this datasheet, which is available on Würth Elektronik’s homepage. Unless otherwise agreed in writing (i.e. customer specific specification), changes to the content of this datasheet may occur without notice, provided that the changes do not have a significant effect on the usability of the optoelectronic components Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1

Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 12/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG: 1. General Customer Responsibility Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not. 2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com. 3. Best Care and Attention Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty. 4. Customer Support for Product Specifications Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 5. Product R&D Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. 6. Product Life Cycle Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 7. Property Rights All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. 8. General Terms and Conditions Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at www.we-online.com. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.002 2024-04-26 DIN ISO 2768-1m WL-ICLED Integrated Controller within LED ORDER CODE 1315050930002 SIZE/TYPE BUSINESS UNIT STATUS PAGE SMT PLCC4 IC RGB LED eiPal Valid 13/13 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.