13010 DESCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 DRAWING NUMBER 13010 DATE: June 2019 STATSHIELD® BAG, SHIELDING, METAL-OUT CONSTRUCTION, 3.0 MIL (0.07mm) © 2019 DESCO INDUSTRIES INC Employee Owned Side Weld Seals 3/8 in. (±0.10) STATSHIELD® METAL-OUT SERIES Specifications: Standard Document Meets Requirements of: ANSI/ESD S541 (ANSI/ESD S20.20) ESD Protective Packaging ANSI/ESD S11.4 Level 3 Technical Requirements Electrical Properties Typical Values Test Procedures/Method Surface Resistance: Outer Surface 1 x 104 to < 1 x 108 ohms ANSI/ESD STM11.11 Inner Surface 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11 Discharge Shielding <20 nJ ANSI/ESD STM11.31, EIA 541 Charge Generation Teflon: -0.03 nC/sq. in. Modified Incline Plane Quartz: +0.10 nC/sq. in. Modified Incline Plane Capacitance Probe (to dissipate 1 KV) <30 volts ANSI/EIA-541/Appendix E, 1kV Discharge Physical Properties: Film Thickness Nominal 3.0 mil (0.07mm) ±10% MIL-STD-3010, 1003 Width (Inside Dimensions) Nominal -0" / + 0.250" Length (Inside Dimensions) Nominal ± 0.125", Offset 0 to 1/4” Light Transmission 40% (Tobias) ASTM D-1003 Puncture Resistance >10 lbs MIL-STD-3010, 2065 Heat Seal >10 lbs/in. 375°F, 1/2 sec 60 psi Non-corrosive Pass MIL-STD-3010, M3005 Silicone Not detected FTIR Marking Adhesion Pass IPC-TM-650 2.4.1 Made in the United States of America ANSI/ESD S541 Section 6.2 Outside an EPA “Transportation of sensitive products outside of an EPA shall require packaging that provides: 1. Low charge generation 2. Dissipative or conductive materials for intimate contact 3. A structure that provides electrostatic discharge shielding.” Specifications and procedures subject to change without notice. Date & Lot Code Printed for QC Traceablility High Performance Static Dissipative Abrasion Resistant Coating Aluminum Shielding Layer Low Charging Static Dissipative Proprietary Polyester Layer Low Charging Static Dissipative Proprietary Inner Polyethylene Layer Statshield® bags are packaged 100 per package in an oversized shielding bag. See Shielding Bag Storage at TB-7507. Mixed Unsortable Plastic Scrap Mixed unsortable plastic scrap shall contain assorted plastics of multiple grades that are co-extruded, bonded or laminated together which are unsortable into individual grades Desco’s bags are recyclable Statshield® and Statfree® are Registered Trademarks of Desco Industries Inc. See Bag Selection Chart Click HERE Weld Seal Soft Fold Bottom RoHS, REACH and Conflict Minerals Statement See the Desco Industries RoHS, REACH, and Conflict Minerals Statement: Desco.com/pdf/REACHRoHSConflictMinerals-Desco_Bags.pdf See the Desco Limited Warranty: Desco.DescoIndustries.com/Limited-Warranty.aspx