1309107003-E METZ | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Version: AM Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification

  • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations
  • equipped with individual E-DAT modul RJ45 module
  • cable feed 45° from the top, plug direction 45° downwards
  • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified
  • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1
  • tested: Link up to 500 MHz
  • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
  • easy to install connection of 2 to 4 pair data lines AWG 26/1 - 22/1 and stranded wires with 7 copper conductors AWG 26/7 - 22/7 to BTR 8-fold insulation displacement connectors (IDC)
  • marking of conductor assignment to T568A or T568B
  • easy and fast insertion of wire pairs in E-DAT modul stuffer cap
  • width of 1HP allows mounting up to 12 REG plus in standard electrical distribution panels
  • when mounted as a device of protection class I, the equipotential bonding is realized directly over the top hat rail by means of an integrated equipotential plate. This has to be connected to the equipotential bonding of the building by means of a bonding terminal
  • a cover protects the module against direct contact. If mounted in distributor panels with protective insulation, protection class II is guaranteed. In this case, it is necessary to remove the equipotential bonding spring.
  • integrated dust protection cover (also colored)

Version: AM Technical Data General Data Fields of application office areas Mechanical measurement according to MICE M1 Ingress measurement according to MICE I1 Climatic measurement according to MICE C1 Electromagnetic measurement according to MICE E2 Design wall outlet Mounting style Standard rail TH35 Shielding shielded Transmission technology Copper Color light gray Dimensions Dimension (L x W x H) 60 mm x 17.5 mm x 60 mm Horizontal pitch 1HP Labeling option label window with identification label Marking option by dust protection Transmission characteristics Category (ISO) 6A Class (ISO/IEC) EA Category (TIA) 6A Remote Powering yes PoE IEEE 802.3af PoE plus IEEE 802.3at UPoE yes 4PPoE IEEE 802.3bt HDBaseT yes Transmission rate up to 10 GBit IEEE 802.3an

Version: AM Technical Data Connections/interfaces Connector technology interface 1 IDC-connection Connector technology interface 2 RJ45-jack Number of ports interface 2 1 Number of ports interface 2 equipped 1 Number of positions/contacts interface 1 8 Number of positions/contacts interface 2 8P/8C Termination data, solid wire (min. - max.) Conductor cross section, solid wire AWG 26/1 - AWG 22/1 Conductor cross section, solid wire 0.128 mm² - 0.324 mm² Conductor diameter, solid wire (bare copper) 0.409 mm - 0.643 mm Conductor diameter, solid wire (bare copper) 0.016 in. - 0.025 in. Termination data, stranded wire (min. - max.) Conductor cross section, stranded wire AWG 26/7 - AWG 22/7 Conductor cross section, stranded wire 0.141 mm² - 0.355 mm² Conductor diameter, stranded wire (bare copper) 0.483 mm - 0.762 mm Conductor diameter, stranded wire (bare copper) 0.019 in. - 0.03 in. Cable sheath diameter (min. - max.) Cable sheath diameter 5.5 mm - 10.00 Cable sheath diameter 0.197 in. - 0.394 Module plug-in direction 45° downwards Cable access/outlet 45° from the top Elektrische/ Optische Eigenschaften Current carrying capacity max. 1 A Contact resistance max. 20 mOhm Insulation resistance min. 500 MOhm Dielectric strength conductor-conductor (secondary) min. 1000 V DC Mechanical data Insertion and withdrawal force max. 30 N Position/mounting of latch standard installation position top

Version: AM Technical Data Materials and material properties Material - Housing GD-Zn (zinc die-cast) Material - Cover part(s) PA66 Material - Lower housing PA66 Material - Label window ABS, transparent Material - Dust protection ABS Material - Contact CuSn (tin bronze) Material - Contact finish Ni + Au (nickel-gold) Material - Contact carriers PA 6.6 Material - Finish Ni (nickel) Material - Ground connection CuSn4 RoHS compliant REACH compliant REACH - substance (SVHC) none Environmental conditions Temperature (min. - max.) Temperature - Storage °C -40 °C - 70 °C Temperature - Storage °F -40 °F - 158 °F Temperature - Operating °C -40 °C - 70 °C Temperature - Operating °F -40 °F - 158 °F Particulate ingress IP2X Liquid ingress/immersion IPX0 Rapid change of temperature -40°C / -40°F - +70°C / 158°F / 25 cycles t=30 min Certifications GHMT Type Approval Component

Version: AM Technical Data Standards/Regulations Generic cabling systems General requirements ANSI/TIA-568 Connectors for electronic equipment Free and fixed connectors DIN EN 60603-7-51:2011-01 Connectors for electronic equipment - Tests and measurements Test standard for connectors (engaging and separating connectors under electrical load) DIN-EN 60512-99-001, Pg. UEL1 Endurance tests IEC 60512-9-3: 03-2009 Interference proof Immunity for industrial environments DIN EN 61000-6-2:2006-03 Climate tests IEC 60512-11 Classifications ETIM 5.0 EC001024 ETIM 6.0 EC001024 ETIM 7.0 EC001024 ETIM 8.0 EC001024 Packing details Type of packaging 10 pc(s) / box Packaging unit - Weight (gram) 697 g Packaging unit - Weight (pound) 1.54 lb Packaging dimension 235 mm x 165 mm x 135 mm

Version: AM Accessories P/N Designation 130898-00-I BLIND module light gray 130898-00-RW-I BLIND module pure white 130898-01-I COAX modul F jack / F jack 130898-02-I COAX modul IEC jack / F jack 130898-03-I COAX modul IEC plug / F jack 130908-I-B1 UAE modul Cat.5e white 130909-I UAE modul Cat.6 jack T568A white 130910-I E-DAT modul Cat.6A 8(8) jack, T568A 130910-I-B1 E-DAT modul Cat.6A 8(8) jack, T568B 130910-Z E-DAT modul Cat.6A 8(8) jack, T568A (12 pcs) 1309A0-I E-DAT modul coupler 8(8) 180° class EA 1309A1-I E-DAT modul coupler 8(8) 90° class EA 130A11-29-I UAE modul 8(8) Cat.6A black 130A11-I UAE modul 8(8) Cat.6A white 130B11-25-E 25Gmodul 130B11-25-Z 25Gmodul (12 pcs) 130B11-E C6 Amodul 180° jack 130B11-Z C6 Amodul 180° jack (12 pcs) 130B12-E C6 Amodul 270° jack 15091001-I OpDAT modul ST OS2 15091071-I OpDAT modul LC-Duplex OS2 15091072-I OpDAT modul LC-Duplex OM3 15091075-I OpDAT modul LC-Duplex OM4 15091076-I OpDAT modul LC-Duplex APC OS2 1509107B-I OpDAT modul LC-Duplex OM2 816979-0103-I Dust protection covers for Modul patch panels subway / REG gray 816979-0105-I Dust protection covers for Modul patch panels subway / REG yellow 816979-0106-I Dust protection covers for Modul patch panels subway / REG blue 816979-0107-I Dust protection covers for Modul patch panels subway / REG green 816979-0108-I Dust protection covers for Modul patch panels subway / REG red

Version: AM Accessories 899011-01 Label sheet for Modul patch panels / REG

Version: AM Illustrations Dimensional drawing Powered by TCPDF (www.tcpdf.org)