1303353 MURATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 30
Technical content
GQM Series: Featuring improved low power consumption for mobile telecommunications, the GQM Series is typically used in frequencies from 500MHz to 10GHz. The copper electrodes allow for ultra low ESR, high Q in the GHz frequencies and high RF current handling capability. This series is the best choice for high performance, high power RF designs requiring voltages up to 500VDC. Offered in EIA sizes 0603, 0805 and the new 1111 size with a capacitance range of 0.1 to 100pF, there are a variety of tight tolerance versions available. Features: Size: 0603, 0805 and 1111 Voltage: 50, 100, 250 and 500VDC Cap Range: 0.1 to 100pF Internal Electrode: Cu Termination: Cu + Ni/Sn plating ESR: Ultra Low Power: High Power (>15W) Frequency Range: 500MHz –10GHz. High Q and Low ESR at VHF , UHF , and Microwave Frequencies Tolerance: Tight Tolerance Available ([W]=+/-0.05pF for <=5pF , [B]=+/-0.1pF for Temp. Characteristics: C0G (-55ºC to 125ºC with 0 ±30ppm/ ºC) Applications: Base stations for cellular, broadcast satellites, cable TV and telecommunication networks, GPS, Bluetooth ® and TV set-top boxes GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Summary 20 – Innovator in Electronics C-29-C www.murata.com 20 – Innovator in Electronics C-29-C www.murata.com
Unit: mm Chip Structure Chip Dimensions L T e e g Chip Capacitor c ba Land Solder Resist Land Pattern Dimensions GQM Data Sheet Capacitance Range Dielectric (Ceramic) Plating (Sn) Barrier (Ni) Termination (Cu) Inner Electrode (Cu) Series EIA size L W T e g min. Flow Soldering Series a b c GQM22 n/a n/a n/a Re-Flow Soldering Series a b c Chip Dimensions Table Series TC WV Capacitance Range 1pF 10pF 100pF pF GQM187 C0G 250V 0.1 to 47 pF GQM188 C0G 100V 0.1 to 6.8 pF 50V 7.0 to 100 pF GQM219 C0G 250V 0.2 to 100 pF 100V 0.2 to 18 pF 50V 20 to 100 pF GQM22M C0G 500V 0.5 to 100 pF Product ID Series Dimension (LxW) Dimension (T) Code Product GQ High Q Code Product M Tin Plated Termination Code Dimension (LxW) 18 1.6x0.8mm 21 2.0x1.25mm 22 2.8x2.8mm Code Dimension (T) 7 0.7mm 8 0.8mm 9 0.85mm M 1.15mm Temperature Characteristics Rated Voltage Capacitance Code TC Cap. Change Operating Temp.Range 5C C0G 0+/-30ppm/°C -55 to 125°C Code Rated Voltage 1H DC 50V 2A DC 100V 2E DC 250V 2H DC 500V Code Capacitance R50 0.5pF 1R0 1.0pF 5R6 5.6pF 100 10pF Capacitance Tolerance Code Cap. Tol. TC W +/-0.05pF C0G (<=5pF) B +/-0.1pF C0G (<=5pF) C +/-0.25pF C0G (<=9pF) D +/-0.5pF C0G (6 to 9pF) F +/-1% C0G (>=10pF)G +/-2% J +/-5% Individual Specification Code Packaging Code Packaging B Bulk in nylon bag D 180mm Paper Taping L 180mm Paper Taping J 330mm Paper Taping K 330mm Paper Taping Capacitance Range Global Part Numbering Series EIA size L W T e g min. Flow Soldering Series a b c GQM22 n/a n/a n/a Re-Flow Soldering Series a b c Chip Dimensions Table Series TC WV Capacitance Range 1pF 10pF 100pF pF GQM187 C0G 250V 0.1 to 47 pF GQM188 C0G 100V 0.1 to 6.8 pF 50V 7.0 to 100 pF GQM219 C0G 250V 0.2 to 100 pF 100V 0.2 to 18 pF 50V 20 to 100 pF GQM22M C0G 500V 0.5 to 100 pF Product ID Series Dimension (LxW) Dimension (T) Code Product GQ High Q Code Product M Tin Plated Termination Code Dimension (LxW) 18 1.6x0.8mm 21 2.0x1.25mm 22 2.8x2.8mm Code Dimension (T) 7 0.7mm 8 0.8mm 9 0.85mm M 1.15mm Temperature Characteristics Rated Voltage Capacitance Code TC Cap. Change Operating Temp.Range 5C C0G 0+/-30ppm/°C -55 to 125°C Code Rated Voltage 1H DC 50V 2A DC 100V 2E DC 250V 2H DC 500V Code Capacitance R50 0.5pF 1R0 1.0pF 5R6 5.6pF 100 10pF Capacitance Tolerance Code Cap. Tol. TC W +/-0.05pF C0G (<=5pF) B +/-0.1pF C0G (<=5pF) C +/-0.25pF C0G (<=9pF) D +/-0.5pF C0G (6 to 9pF) F +/-1% C0G (>=10pF)G +/-2% J +/-5% Individual Specification Code Packaging Code Packaging B Bulk in nylon bag D 180mm Paper Taping L 180mm Paper Taping J 330mm Paper Taping K 330mm Paper Taping Capacitance Range Global Part Numbering Series EIA size L W T e g min. Flow Soldering Series a b c GQM22 n/a n/a n/a Re-Flow Soldering Series a b c Chip Dimensions Table Series TC WV Capacitance Range 1pF 10pF 100pF pF GQM187 C0G 250V 0.1 to 47 pF GQM188 C0G 100V 0.1 to 6.8 pF 50V 7.0 to 100 pF GQM219 C0G 250V 0.2 to 100 pF 100V 0.2 to 18 pF 50V 20 to 100 pF GQM22M C0G 500V 0.5 to 100 pF Product ID Series Dimension (LxW) Dimension (T) Code Product GQ High Q Code Product M Tin Plated Termination Code Dimension (LxW) 18 1.6x0.8mm 21 2.0x1.25mm 22 2.8x2.8mm Code Dimension (T) 7 0.7mm 8 0.8mm 9 0.85mm M 1.15mm Temperature Characteristics Rated Voltage Capacitance Code TC Cap. Change Operating Temp.Range 5C C0G 0+/-30ppm/°C -55 to 125°C Code Rated Voltage 1H DC 50V 2A DC 100V 2E DC 250V 2H DC 500V Code Capacitance R50 0.5pF 1R0 1.0pF 5R6 5.6pF 100 10pF Capacitance Tolerance Code Cap. Tol. TC W +/-0.05pF C0G (<=5pF) B +/-0.1pF C0G (<=5pF) C +/-0.25pF C0G (<=9pF) D +/-0.5pF C0G (6 to 9pF) F +/-1% C0G (>=10pF)G +/-2% J +/-5% Individual Specification Code Packaging Code Packaging B Bulk in nylon bag D 180mm Paper Taping L 180mm Paper Taping J 330mm Paper Taping K 330mm Paper Taping Capacitance Range Global Part Numbering Unit: mm Chip Structure Chip Dimensions L T e e g Chip Capacitor c ba Land Solder Resist Land Pattern Dimensions GQM Data Sheet Capacitance Range Dielectric (Ceramic) Plating (Sn) Barrier (Ni) Termination (Cu) Inner Electrode (Cu) Unit: mm Chip Structure Chip Dimensions L T e e g Chip Capacitor c ba Land Solder Resist Land Pattern Dimensions GQM Data Sheet Capacitance Range Dielectric (Ceramic) Plating (Sn) Barrier (Ni) Termination (Cu) Inner Electrode (Cu) GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Data Sheet Innovator in Electronics – 21C-29-C www.murata.com Innovator in Electronics – 21C-29-C www.murata.com
Size TC WV Cap Cap Tol Murata Global P/N 0603 C0G 250V 0.1pF +/-0.1pF GQM1875C2ER10BB12D 0603 C0G 250V 0.2pF +/-0.1pF GQM1875C2ER20BB12D 0603 C0G 250V 0.3pF +/-0.1pF GQM1875C2ER30BB12D 0603 C0G 250V 0.4pF +/-0.1pF GQM1875C2ER40BB12D 0603 C0G 250V 0.5pF +/-0.1pF GQM1875C2ER50BB12D 0603 C0G 250V 0.5pF +/-0.25pF GQM1875C2ER50CB12D 0603 C0G 250V 0.75pF +/-0.1pF GQM1875C2ER75BB12D 0603 C0G 250V 0.75pF +/-0.25pF GQM1875C2ER75CB12D 0603 C0G 250V 1pF +/-0.1pF GQM1875C2E1R0BB12D 0603 C0G 250V 1pF +/-0.25pF GQM1875C2E1R0CB12D 0603 C0G 250V 1.1pF +/-0.1pF GQM1875C2E1R1BB12D 0603 C0G 250V 1.2pF +/-0.1pF GQM1875C2E1R2BB12D 0603 C0G 250V 1.3pF +/-0.1pF GQM1875C2E1R3BB12D 0603 C0G 250V 1.5pF +/-0.1pF GQM1875C2E1R5BB12D 0603 C0G 250V 1.5pF +/-0.25pF GQM1875C2E1R5CB12D 0603 C0G 250V 1.6pF +/-0.1pF GQM1875C2E1R6BB12D 0603 C0G 250V 1.8pF +/-0.1pF GQM1875C2E1R8BB12D 0603 C0G 250V 2pF +/-0.1pF GQM1875C2E2R0BB12D 0603 C0G 250V 2pF +/-0.25pF GQM1875C2E2R0CB12D 0603 C0G 250V 2.2pF +/-0.1pF GQM1875C2E2R2BB12D 0603 C0G 250V 2.4pF +/-0.1pF GQM1875C2E2R4BB12D 0603 C0G 250V 2.7pF +/-0.1pF GQM1875C2E2R7BB12D 0603 C0G 250V 3pF +/-0.1pF GQM1875C2E3R0BB12D 0603 C0G 250V 3pF +/-0.25pF GQM1875C2E3R0CB12D 0603 C0G 250V 3.3pF +/-0.1pF GQM1875C2E3R3BB12D 0603 C0G 250V 3.6pF +/- 0.1pF GQ M1875C2E3R6BB12D 0603 C0G 250V 3.9pF +/-0.1pF GQM1875C2E3R9BB12D 0603 C0G 250V 4pF +/-0.1pF GQM1875C2E4R0BB12D 0603 C0G 250V 4pF +/-0.25pF GQM1875C2E4R0CB12D 0603 C0G 250V 4.3pF +/-0.1pF GQM1875C2E4R3BB12D 0603 C0G 250V 4.7pF +/-0.1pF GQM1875C2E4R7BB12D 0603 C0G 250V 5pF +/-0.1pF GQM1875C2E5R0BB12D 0603 C0G 250V 5pF +/-0.25pF GQM1875C2E5R0CB12D 0603 C0G 250V 5.1pF +/-0.25pF GQM1875C2E5R1CB12D 0603 C0G 250V 5.6pF +/-0.25pF GQM1875C2E5R6CB12D High Frequency GQM Series (0603 / C0G)GQM18 Series GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering 22 – Innovator in Electronics C-29-C www.murata.com
Size TC WV Cap Cap Tol Murata Global P/N 0603 C0G 250V 6pF +/-0.25pF GQM1875C2E6R0CB12D 0603 C0G 250V 6pF +/-0.5pF GQM1875C2E6R0DB12D 0603 C0G 250V 6.2pF +/-0.25pF GQM1875C2E6R2CB12D 0603 C0G 250V 6.8pF +/-0.25pF GQM1875C2E6R8CB12D 0603 C0G 250V 7pF +/-0.25pF GQM1875C2E7R0CB12D 0603 C0G 250V 7pF +/-0.5pF GQM1875C2E7R0DB12D 0603 C0G 250V 7.5pF +/-0.25pF GQM1875C2E7R5CB12D 0603 C0G 250V 8pF +/-0.25pF GQM1875C2E8R0CB12D 0603 C0G 250V 8pF +/-0.5pF GQM1875C2E8R0DB12D 0603 C0G 250V 8.2pF +/-0.25pF GQM1875C2E8R2CB12D 0603 C0G 250V 9pF +/-0.25pF GQM1875C2E9R0CB12D 0603 C0G 250V 9pF +/-0.5pF GQM1875C2E9R0DB12D 0603 C0G 250V 9.1pF +/-0.25pF GQM1875C2E9R1CB12D
0603 C0G 250V 10pF +/-2% GQM1875C2E100GB12D
0603 C0G 250V 10pF +/-5% GQM1875C2E100JB12D
0603 C0G 250V 12pF +/-2% GQM1875C2E120GB12D
0603 C0G 250V 12pF +/-5% GQM1875C2E120JB12D
0603 C0G 250V 15pF +/-2% GQM1875C2E150GB12D
0603 C0G 250V 15pF +/-5% GQM1875C2E150JB12D
0603 C0G 250V 18pF +/-2% GQM1875C2E180GB12D
0603 C0G 250V 18pF +/-5% GQM1875C2E180JB12D
0603 C0G 250V 20pF +/-2% GQM1875C2E200GB12D
0603 C0G 250V 20pF +/-5% GQM1875C2E200JB12D
0603 C0G 250V 22pF +/-2% GQM1875C2E220GB12D
0603 C0G 250V 22pF +/-5% GQM1875C2E220JB12D
0603 C0G 250V 27pF +/-2% GQM1875C2E270GB12D
0603 C0G 250V 27pF +/-5% GQM1875C2E270JB12D
0603 C0G 250V 33pF +/-2% GQM1875 C2E330GB 12D
0603 C0G 250V 33pF +/-5% GQM1875C2E330JB12D
0603 C0G 250V 39pF +/-2% GQM1875C2E390GB12D
0603 C0G 250V 39pF +/-5% GQM1875C2E390JB12D
0603 C0G 250V 47pF +/-2% GQM1875C2E470GB12D
0603 C0G 250V 47pF +/-5% GQM1875C2E470JB12D
High Frequency GQM Series (0603 / C0G)GQM18 Series GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Innovator in Electronics – 23C-29-C www.murata.com
Product Offering GQM series Size TC WV Cap Cap Tol Murata Global P/N 0603 C0G 100V 0.1pF +/-0.1pF GQM1885C2AR10BB01D 0603 C0G 100V 0.2pF +/-0.1pF GQM1885C2AR20BB01D 0603 C0G 100V 0.3pF +/-0.1pF GQM1885C2AR30BB01D 0603 C0G 100V 0.4pF +/-0.1pF GQM1885C2AR40BB01D 0603 C0G 100V 0.5pF +/-0.1pF GQM1885C2AR50BB01D 0603 C0G 100V 0.5pF +/-0.25pF GQM1885C2AR50CB01D 0603 C0G 100V 0.75pF +/-0.1pF GQM1885C2AR75BB01D 0603 C0G 100V 0.75pF +/-0.25pF GQM1885C2AR75CB01D 0603 C0G 100V 1pF +/-0.1pF GQM1885C2A1R0BB01D 0603 C0G 100V 1pF +/-0.25pF GQM1885C2A1R0CB01D 0603 C0G 100V 1.1pF +/-0.1pF GQM1885C2A1R1BB01D 0603 C0G 100V 1.2pF +/-0.1pF GQM1885C2A1R2BB01D 0603 C0G 100V 1.3pF +/-0.1pF GQM1885C2A1R3BB01D 0603 C0G 100V 1.5pF +/-0.1pF GQM1885C2A1R5BB01D 0603 C0G 100V 1.5pF +/-0.25pF GQM1885C2A1R5CB01D 0603 C0G 100V 1.6pF +/-0.1pF GQM1885C2A1R6BB01D 0603 C0G 100V 1.8pF +/-0.1pF GQM1885C2A1R8BB01D 0603 C0G 100V 2pF +/-0.1pF GQM1885C2A2R0BB01D 0603 C0G 100V 2pF +/-0.25pF GQM1885C2A2R0CB01D 0603 C0G 100V 2.2pF +/-0.1pF GQM1885C2A2R2BB01D 0603 C0G 100V 2.4pF +/-0.1pF GQM1885C2A2R4BB01D 0603 C0G 100V 2.7pF +/-0.1pF GQM1885C2A2R7BB01D 0603 C0G 100V 3pF +/-0.1pF GQM1885C2A3R0BB01D 0603 C0G 100V 3pF +/-0.25pF GQM1885C2A3R0CB01D 0603 C0G 100V 3.3pF +/-0.1pF GQM1885C2A3R3BB01D 0603 C0G 100V 3.6pF +/-0 .1pF GQ M1885C2A3R6BB01D 0603 C0G 100V 3.9pF +/-0.1pF GQM1885C2A3R9BB01D 0603 C0G 100V 4pF +/-0.1pF GQM1885C2A4R0BB01D 0603 C0G 100V 4pF +/-0.25pF GQM1885C2A4R0CB01D 0603 C0G 100V 4.3pF +/-0.1pF GQM1885C2A4R3BB01D 0603 C0G 100V 4.7pF +/-0.1pF GQM1885C2A4R7BB01D High Fr equency GQM Series ( 0603 / C0G)GQM18 Series Product Offering GQM series Size TC WV Cap Cap Tol Murata Global P/N 0603 C0G 100V 5pF +/-0.1pF GQM1885C2A5R0BB01D 0603 C0G 100V 5pF +/-0.25pF GQM1885C2A5R0CB01D 0603 C0G 100V 5.1pF +/-0.25pF GQM1885C2A5R1CB01D 0603 C0G 100V 5.6pF +/-0.25pF GQM1885C2A5R6CB01D 0603 C0G 100V 6pF +/-0.25pF GQM1885C2A6R0CB01D 0603 C0G 100V 6pF +/-0.5pF GQM1885C2A6R0DB01D 0603 C0G 100V 6.2pF +/-0.25pF GQM1885C2A6R2CB01D 0603 C0G 100V 6.8pF +/-0.25pF GQM1885C2A6R8CB01D 0603 C0G 50V 7pF +/-0.25pF GQM1885C1H7R0CB01D 0603 C0G 50V 7pF +/-0.5pF GQM1885C1H7R0DB01D 0603 C0G 50V 7.5pF +/-0.25pF GQM1885C1H7R5CB01D 0603 C0G 50V 8pF +/-0.25pF GQM1885C1H8R0CB01D 0603 C0G 50V 8pF +/-0.5pF GQM1885C1H8R0DB01D 0603 C0G 50V 8.2pF +/-0.25pF GQM1885C1H8R2CB01D 0603 C0G 50V 9pF +/-0.25pF GQM1885C1H9R0CB01D 0603 C0G 50V 9pF +/-0.5pF GQM1885C1H9R0DB01D 0603 C0G 50V 9.1pF +/-0.25pF GQM1885C1H9R1CB01D
0603 C0G 50V 10pF +/-2% GQM1885C1H100GB01D
0603 C0G 50V 10pF +/-5% GQM1885C1H100JB01D
0603 C0G 50V 12pF +/-2% GQM1885C1H120GB01D
0603 C0G 50V 12pF +/-5% GQM1885C1H120JB01D
0603 C0G 50V 15pF +/-2% GQM1885C1H150GB01D
0603 C0G 50V 15pF +/-5% GQM1885C1H150JB01D
0603 C0G 50V 18pF +/-2% GQM1885C1H180GB01D
0603 C0G 50V 18pF +/-5% GQM1885C1H180JB01D
0603 C0G 50V 20pF +/-2% GQM1885C1H200GB01D
0603 C0G 50V 20pF +/-5% GQM1885C1H200JB01D
0603 C0G 50V 22pF +/-2% GQM1885C 1H220GB 01D
0603 C0G 50V 22pF +/-5% GQM1885C1H220JB01D
High Fr equency GQM Series ( 0603 / C0G)
0603 C0G 50V 27pF +/-2% GQM1885C1H270GB01D
0603 C0G 50V 27pF +/-5% GQM1885C1H270JB01D
0603 C0G 50V 33pF +/-2% GQM1885C1H330GB01D
0603 C0G 50V 33pF +/-5% GQM1885C1H330JB01D
0603 C0G 50V 39pF +/-2% GQM1885C1H390GB01D
0603 C0G 50V 39pF +/-5% GQM1885C1H390JB01D
0603 C0G 50V 47pF +/-2% GQM1885C1H470GB01D
0603 C0G 50V 47pF +/-5% GQM1885C1H470JB01D
0603 C0G 50V 56pF +/-2% GQM1885C1H560GB01D
0603 C0G 50V 56pF +/-5% GQM1885C1H560JB01D
0603 C0G 50V 68pF +/-2% GQM1885C1H680GB01D
0603 C0G 50V 68pF +/-5% GQM1885C1H680JB01D
0603 C0G 50V 82pF +/-2% GQM1885C1H820GB01D
0603 C0G 50V 82pF +/-5% GQM1885C1H820JB01D
0603 C0G 50V 100pF +/-2% GQM1885C1H101GB01D
0603 C0G 50V 100pF +/-5% GQM1885C1H101JB01D
Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering 24 – Innovator in Electronics C-29-C www.murata.com
Product Offering GQM series Size TC WV Cap Cap Tol Murata Global P/N 0603 C0G 100V 5pF +/-0.1pF GQM1885C2A5R0BB01D 0603 C0G 100V 5pF +/-0.25pF GQM1885C2A5R0CB01D 0603 C0G 100V 5.1pF +/-0.25pF GQM1885C2A5R1CB01D 0603 C0G 100V 5.6pF +/-0.25pF GQM1885C2A5R6CB01D 0603 C0G 100V 6pF +/-0.25pF GQM1885C2A6R0CB01D 0603 C0G 100V 6pF +/-0.5pF GQM1885C2A6R0DB01D 0603 C0G 100V 6.2pF +/-0.25pF GQM1885C2A6R2CB01D 0603 C0G 100V 6.8pF +/-0.25pF GQM1885C2A6R8CB01D 0603 C0G 50V 7pF +/-0.25pF GQM1885C1H7R0CB01D 0603 C0G 50V 7pF +/-0.5pF GQM1885C1H7R0DB01D 0603 C0G 50V 7.5pF +/-0.25pF GQM1885C1H7R5CB01D 0603 C0G 50V 8pF +/-0.25pF GQM1885C1H8R0CB01D 0603 C0G 50V 8pF +/-0.5pF GQM1885C1H8R0DB01D 0603 C0G 50V 8.2pF +/-0.25pF GQM1885C1H8R2CB01D 0603 C0G 50V 9pF +/-0.25pF GQM1885C1H9R0CB01D 0603 C0G 50V 9pF +/-0.5pF GQM1885C1H9R0DB01D 0603 C0G 50V 9.1pF +/-0.25pF GQM1885C1H9R1CB01D High Fr equency GQM Series ( 0603 / C0G) Product Offering GQM series Size TC WV Cap Cap Tol Murata Global P/N 0603 C0G 100V 5pF +/-0.1pF GQM1885C2A5R0BB01D 0603 C0G 100V 5pF +/-0.25pF GQM1885C2A5R0CB01D 0603 C0G 100V 5.1pF +/-0.25pF GQM1885C2A5R1CB01D 0603 C0G 100V 5.6pF +/-0.25pF GQM1885C2A5R6CB01D 0603 C0G 100V 6pF +/-0.25pF GQM1885C2A6R0CB01D 0603 C0G 100V 6pF +/-0.5pF GQM1885C2A6R0DB01D 0603 C0G 100V 6.2pF +/-0.25pF GQM1885C2A6R2CB01D 0603 C0G 100V 6.8pF +/-0.25pF GQM1885C2A6R8CB01D 0603 C0G 50V 7pF +/-0.25pF GQM1885C1H7R0CB01D 0603 C0G 50V 7pF +/-0.5pF GQM1885C1H7R0DB01D 0603 C0G 50V 7.5pF +/-0.25pF GQM1885C1H7R5CB01D 0603 C0G 50V 8pF +/-0.25pF GQM1885C1H8R0CB01D 0603 C0G 50V 8pF +/-0.5pF GQM1885C1H8R0DB01D 0603 C0G 50V 8.2pF +/-0.25pF GQM1885C1H8R2CB01D 0603 C0G 50V 9pF +/-0.25pF GQM1885C1H9R0CB01D 0603 C0G 50V 9pF +/-0.5pF GQM1885C1H9R0DB01D 0603 C0G 50V 9.1pF +/-0.25pF GQM1885C1H9R1CB01D High Fr equency GQM Series ( 0603 / C0G) Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Innovator in Electronics – 25C-29-C www.murata.com
Size TC WV Cap Cap Tol Murata Global P/N 0805 C0G2 50V 0.2pF +/-0.1pF GQM2195C2ER20BB12D 0805 C0G 250V 0.3pF +/-0.1pF GQM2195C2ER30BB12D 0805 C0G 250V 0.4pF +/-0.1pF GQM2195C2ER40BB12D 0805 C0G 250V 0.5pF +/-0.1pF GQM2195C2ER50BB12D 0805 C0G 250V 0.5pF +/-0.25pF GQM2195C2ER50CB12D 0805 C0G 250V 0.75pF +/-0.1pF GQM2195C2ER75BB12D 0805 C0G 250V 0.75pF +/-0.25pF GQM2195C2ER75CB12D 0805 C0G 250V 1pF +/-0.1pF GQM2195C2E1R0BB12D 0805 C0G 250V 1pF +/-0.25pF GQM2195C2E1R0CB12D 0805 C0G 250V 1.1pF +/-0.1pF GQM2195C2E1R1BB12D 0805 C0G 250V 1.2pF +/-0.1pF GQM2195C2E1R2BB12D 0805 C0G 250V 1.3pF +/-0.1pF GQM2195C2E1R3BB12D 0805 C0G 250V 1.5pF +/-0.1pF GQM2195C2E1R5BB12D 0805 C0G 250V 1.5pF +/-0.25pF GQM2195C2E1R5CB12D 0805 C0G 250V 1.6pF +/-0.1pF GQM2195C2E1R6BB12D 0805 C0G 250V 1.8pF +/-0.1pF GQM2195C2E1R8BB12D 0805 C0G 250V 2pF +/-0.1pF GQM2195C2E2R0BB12D 0805 C0G 250V 2pF +/-0.25pF GQM2195C2E2R0CB12D 0805 C0G 250V 2.2pF +/-0.1pF GQM2195C2E2R2BB12D 0805 C0G 250V 2.4pF +/-0.1pF GQM2195C2E2R4BB12D 0805 C0G 250V 2.7pF +/-0.1pF GQM2195C2E2R7BB12D 0805 C0G 250V 3pF +/-0.1pF GQM2195C2E3R0BB12D 0805 C0G 250V 3pF +/-0.25pF GQM2195C2E3R0CB12D 0805 C0G 250V 3.3pF +/-0.1pF GQM2195C2E3R3BB12D 0805 C0G 250V 3.6pF +/-0.1pF GQM2195C2E3R6BB12D 0805 C0G 250V 3.9pF +/-0.1p F GQ M2195C2E3R9BB12D 0805 C0G 250V 4pF +/-0.1pF GQM2195C2E4R0BB12D 0805 C0G 250V 4pF +/ -0.25pF GQM2195C2E4R0CB12D 0805 C0G 250V 4.3pF +/-0.1pF GQM2195C2E4R3BB12D 0805 C0G 250V 4.7pF +/-0.1pF GQM2195C2E4R7BB12D 0805 C0G 250V 5pF +/-0.1pF GQM2195C2E5R0BB12D 0805 C0G 250V 5pF +/-0.25pF GQM2195C2E5R0CB12D 0805 C0G 250V 5.1pF +/-0.25pF GQM2195C2E5R1CB12D 0805 C0G 250V 5.6pF +/-0.25pF GQM2195C2E5R6CB12D High Frequency GQM Series (0805/C0G) 0805 C0G 250V 6pF +/-0.25pF GQM2195C2E6R0CB12D 0805 C0G 250V 6pF +/-0.5pF GQM2195C2E6R0DB12D 0805 C0G 250V 6.2pF +/-0.25pF GQM2195C2E6R2CB12D 0805 C0G 250V 6.8pF +/-0.25pF GQM2195C2E6R8CB12D GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering 26 – Innovator in Electronics C-29-C www.murata.com
Size TC WV Cap Cap Tol Murata Global P/N 0805 C0G 250V 7pF +/-0.25pF GQM2195C2E7R0CB12D 0805 C0G 250V 7pF +/-0.5pF GQM2195C2E7R0DB12D 0805 C0G 250V 7.5pF +/-0.25pF GQM2195C2E7R5CB12D 0805 C0G 250V 8pF +/-0.25pF GQM2195C2E8R0CB12D 0805 C0G 250V 8pF +/-0.5pF GQM2195C2E8R0DB12D 0805 C0G 250V 8.2pF +/-0.25pF GQM2195C2E8R2CB12D 0805 C0G 250V 9pF +/-0.25pF GQM2195C2E9R0CB12D 0805 C0G 250V 9pF +/-0.5pF GQM2195C2E9R0DB12D 0805 C0G 250V 9.1pF +/-0.25pF GQM2195C2E9R1CB12D
0805 C0G 250V 10pF +/-2% GQM2195C2E100GB12D
0805 C0G 250V 10pF +/-5% GQM2195C2E100JB12D
0805 C0G 250V 12pF +/-2% GQM2195C2E120GB12D
0805 C0G 250V 12pF +/-5% GQM2195C2E120JB12D
0805 C0G 250V 15pF +/- 2% GQM2195C2E150GB12D
0805 C0G 250V 15pF +/-5% GQM2195C2E150JB12D
0805 C0G 250V 18pF +/-2% GQM2195C2E180GB12D
0805 C0G 250V 18pF +/-5% GQM2195C2E180JB12D
0805 C0G 250V 20pF +/-2% GQM2195C2E200GB12D
0805 C0G 250V 20pF +/-5% GQM2195C2E200JB12D
0805 C0G 250V 22pF +/-2% GQM2195C2E220GB12D
0805 C0G 250V 22pF +/-5% GQM2195C2E220JB12D
0805 C0G 250V 27pF +/-2% GQM2195C2E270GB12D
0805 C0G 250V 27pF +/-5% GQM2195C2E270JB12D
0805 C0G 250V 33pF +/-2% GQM2195C2E330GB12D
0805 C0G 250V 33pF +/-5% GQM2195C2E330JB12D
0805 C0G 250V 39pF +/-2% GQM2195C2E390GB12D
0805 C0G 250V 39pF +/-5% GQM2195C2E390JB12D
0805 C0G 250V 47pF +/-2% GQM2195 C2E470GB 12D
0805 C0G 250V 47pF +/-5% GQM2195C2E470JB12D
0805 C0G 250V 56pF +/-2% GQM2195C2E560GB12D
0805 C0G 250V 56pF +/-5% GQM2195C2E560JB12D
0805 C0G 250V 68pF +/-2% GQM2195C2E680GB12D
0805 C0G 250V 68pF +/-5% GQM2195C2E680JB12D
0805 C0G 250V 82pF +/-2% GQM2195C2E820GB12D
0805 C0G 250V 82pF +/-5% GQM2195C2E820JB12D
0805 C0G 250V 100pF +/-2% GQM2195C2E101GB12D
0805 C0G 250V 100pF +/-5% GQM2195C2E101JB12D
High Frequency GQM Series (0805/C0G) GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Innovator in Electronics – 27C-29-C www.murata.com
Product Offering GQM series Size TC WV Cap Cap Tol Murata Global P/N 0805 C0G 100V 0.2pF +/-0.1pF GQM2195C2AR20BB01D 0805 C0G 100V 0.3pF +/-0.1pF GQM2195C2AR30BB01D 0805 C0G 100V 0.4pF +/-0.1pF GQM2195C2AR40BB01D 0805 C0G 100V 0.5pF +/-0.1pF GQM2195C2AR50BB01D 0805 C0G 100V 0.5pF +/-0.25pF GQM2195C2AR50CB01D 0805 C0G 100V 0.75pF +/-0.1pF GQM2195C2AR75BB01D 0805 C0G 100V 0.75pF +/-0.25pF GQM2195C2AR75CB01D 0805 C0G 100V 1pF +/-0.1pF GQM2195C2A1R0BB01D 0805 C0G 100V 1pF +/-0.25pF GQM2195C2A1R0CB01D 0805 C0G 100V 1.1pF +/-0.1pF GQM2195C2A1R1BB01D 0805 C0G 100V 1.2pF +/-0.1pF GQM2195C2A1R2BB01D 0805 C0G 100V 1.3pF +/-0.1pF GQM2195C2A1R3BB01D 0805 C0G 100V 1.5pF +/-0.1pF GQM2195C2A1R5BB01D 0805 C0G 100V 1.5pF +/-0.25pF GQM2195C2A1R5CB01D 0805 C0G 100V 1.6pF +/-0.1pF GQM2195C2A1R6BB01D 0805 C0G 100V 1.8pF +/-0.1pF GQM2195C2A1R8BB01D 0805 C0G 100V 2pF +/-0.1pF GQM2195C2A2R0BB01D 0805 C0G 100V 2pF +/-0.25pF GQM2195C2A2R0CB01D 0805 C0G 100V 2.2pF +/-0.1pF GQM2195C2A2R2BB01D 0805 C0G 100V 2.4pF +/-0.1pF GQM2195C2A2R4BB01D 0805 C0G 100V 2.7pF +/-0.1pF GQM2195C2A2R7BB01D 0805 C0G 100V 3pF +/-0.1pF GQM2195C2A3R0BB01D 0805 C0G 100V 3pF +/-0.25pF GQM2195C2A3R0CB01D 0805 C0G 100V 3.3pF +/-0.1pF GQM2195C2A3R3BB01D 0805 C0G 100V 3.6pF +/-0.1pF GQM2195C2A3R6BB01D 0805 C0G 100V 3.9pF +/- 0.1pF GQM2195C 2A3R9BB01D 0805 C0G 100V 4pF +/-0.1pF GQM2195C2A4R0BB01D 0805 C0G 100V 4pF +/-0.25pF GQM2195C2A4R0CB01D 0805 C0G 100V 4.3pF +/-0.1pF GQM2195C2A4R3BB01D 0805 C0G 100V 4.7pF +/-0.1pF GQM2195C2A4R7BB01D 0805 C0G 100V 5pF +/-0.1pF GQM2195C2A5R0BB01D 0805 C0G 100V 5pF +/-0.25pF GQM2195C2A5R0CB01D 0805 C0G 100V 5.1pF +/-0.25pF GQM2195C2A5R1CB01D 0805 C0G 100V 5.6pF +/-0.25pF GQM2195C2A5R6CB01D 0805 C0G 100V 6pF +/-0.25pF GQM2195C2A6R0CB01D 0805 C0G 100V 6pF +/-0.5pF GQM2195C2A6R0DB01D 0805 C0G 100V 6.2pF +/-0.25pF GQM2195C2A6R2CB01D 0805 C0G 100V 6.8pF +/-0.25pF GQM2195C2A6R8CB01D High Fr equency GQM Series ( 0805 / C0G)High Frequency (0805 Size / C0G)GQM21 Series GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering 28 – Innovator in Electronics C-29-C www.murata.com
Product Offering GQM series Size TC WV Cap Cap Tol Murata Global P/N 0805 C0G 100V 7pF +/-0.25pF GQM2195C2A7R0CB01D 0805 C0G 100V 7pF +/-0.5pF GQM2195C2A7R0DB01D 0805 C0G 100V 7.5pF +/-0.25pF GQM2195C2A7R5CB01D 0805 C0G 100V 8pF +/-0.25pF GQM2195C2A8R0CB01D 0805 C0G 100V 8pF +/-0.5pF GQM2195C2A8R0DB01D 0805 C0G 100V 8.2pF +/-0.25pF GQM2195C2A8R2CB01D 0805 C0G 100V 9pF +/-0.25pF GQM2195C2A9R0CB01D 0805 C0G 100V 9pF +/-0.5pF GQM2195C2A9R0DB01D 0805 C0G 100V 9.1pF +/-0.25pF GQM2195C2A9R1CB01D
0805 C0G 100V 10pF +/-2% GQM2195C2A100GB01D
0805 C0G 100V 10pF +/-5% GQM2195C2A100JB01D
0805 C0G 100V 12pF +/-2% GQM2195C2A120GB01D
0805 C0G 100V 12pF +/-5% GQM2195C2A120JB01D
0805 C0G 100V 15pF +/-2% GQM2195C2A150GB01D
0805 C0G 100V 15pF +/-5% GQM2195C2A150JB01D
0805 C0G 100V 18pF +/-2% GQM2195C2A180GB01D
0805 C0G 100V 18pF +/-5% GQM2195C2A180JB01D
0805 C0G 50V 20pF +/-2% GQM2195C1H200GB01D
0805 C0G 50V 20pF +/-5% GQM2195C1H200JB01D
0805 C0G 50V 22pF +/-2% GQM2195C1H220GB01D
0805 C0G 50V 22pF +/-5% GQM2195C1H220JB01D
0805 C0G 50V 27pF +/-2% GQM2195C1H270GB01D
0805 C0G 50V 27pF +/-5% GQM2195C1H270JB01D
0805 C0G 50V 33pF +/-2% GQM2195C1H330GB01D
0805 C0G 50V 33pF +/-5% GQM2195C1H330JB01D
0805 C0G 50V 39pF +/-2% GQM2195C1H390GB01D
0805 C0G 50V 39pF +/-5% GQM2195C1H390JB01D
0805 C0G 50V 47pF +/-2% GQM2195C 1H470GB 01D
0805 C0G 50V 47pF +/-5% GQM2195C1H470JB01D
0805 C0G 50V 56pF +/-2% GQM2195C1H560GB01D
0805 C0G 50V 56pF +/-5% GQM2195C1H560JB01D
0805 C0G 50V 68pF +/-2% GQM2195C1H680GB01D
0805 C0G 50V 68pF +/-5% GQM2195C1H680JB01D
0805 C0G 50V 82pF +/-2% GQM2195C1H820GB01D
0805 C0G 50V 82pF +/-5% GQM2195C1H820JB01D
0805 C0G 50V 100pF +/-2% GQM2195C1H101GB01D
0805 C0G 50V 100pF +/-5% GQM2195C1H101JB01D
High Fr equency GQM Series ( 0805 / C0G)High Frequency (0805 Size / C0G)GQM21 Series GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Innovator in Electronics – 29C-29-C www.murata.com
Prod uc t Offe ring GQM series Size TC WV Cap Cap Tol Murata Global P/N 1111 C0G 500V0 .5pF +/-0.1pF GQM22M5C2HR50BB01L 1111 C0G 500V0 .5pF +/-0.25pF GQM22M5C2HR50CB01L 1111 C0G 500V0 .75pF+ /-0.1pF GQM22M5C2HR75BB01L 1111 C0G 500V0 .75pF+ /-0.25pF GQM22M5C2HR75CB01L 1111 C0G 500V 1pF +/-0.1pF GQM22M5C2H1R0BB01L 1111 C0G 500V 1pF +/-0.25pF GQM22M5C2H1R0CB01L 1111 C0G 500V1 .1pF +/-0.1pF GQM22M5C2H1R1BB01L 1111 C0G 500V1 .2pF +/-0.1pF GQM22M5C2H1R2BB01L 1111 C0G 500V1 .3pF +/-0.1pF GQM22M5C2H1R3BB01L 1111 C0G 500V1 .5pF +/-0.1pF GQM22M5C2H1R5BB01L 1111 C0G 500V1 .5pF +/-0.25pF GQM22M5C2H1R5CB01L 1111 C0G 500V1 .6pF +/-0.1pF GQM22M5C2H1R6BB01L 1111 C0G 500V1 .8pF +/-0.1pF GQM22M5C2H1R8BB01L 1111 C0G 500V 2pF +/-0.1pF GQM22M5C2H2R0BB01L 1111 C0G 500V 2pF +/-0.25pF GQM22M5C2H2R0CB01L 1111 C0G 500V2 .2pF +/-0.1pF GQM22M5C2H2R2BB01L 1111 C0G 500V2 .4pF +/-0.1pF GQM22M5C2H2R4BB01L 1111 C0G 500V2 .7pF +/-0.1pF GQM22M5C2H2R7BB01L 1111 C0G 500V 3pF +/-0.1pF GQM22M5C2H3R0BB01L 1111 C0G 500V 3pF +/-0.25pF GQM22M5C2H3R0CB01L 1111 C0G 500V3 .3pF +/-0.1pF GQM22M5C2H3R3BB01L 1111 C0G 500V3 .6pF +/-0.1pF GQM22M5C2H3R6BB01L 1111 C0G 500V3 .9pF +/-0.1pF GQM22M5C2H3R9BB01L 1111 C0G 500V 4pF +/-0.1pF GQM22M5C2H4R0BB01L 1111 C0G 500V 4pF +/-0.25pF GQM22M5C2H4R0CB01L 1111 C0G 500V4 .3pF +/-0.1pF GQM22M5C2H4R3BB01L 1111 C0G 500V4 .7pF +/-0.1pF GQM22M5C2H4R7BB01L 1111 C0G 500V 5pF +/-0.1pF GQM22M5C2H5R0BB01L 1111 C0G 500V 5pF +/-0.25pF GQM22M5C2H5R0CB01L 1111 C0G 500V5 .1pF +/-0.25pF GQM22M5C2H5R1CB01L 1111 C0G 500V5 .6pF +/-0.25pF GQM22M5C2H5R6CB01L 1111 C0G 500V 6pF +/-0.25pF GQM22M5C2H6R0CB01L 1111 C0G 500V 6pF +/-0.5pF GQM22M5C2H6R0DB01L 1111 C0G 500V6 .2pF +/-0.25pF GQM22M5C2H6R2CB01L 1111 C0G 500V6 .8pF +/-0.25pF GQM22M5C2H6R8CB01L 1111 C0G 500V 7pF +/-0.25pF GQM22M5C2H7R0CB01L 1111 C0G 500V 7pF +/-0.5pF GQM22M5C2H7R0DB01L 1111 C0G 500V7 .5pF +/-0.25pF GQM22M5C2H7R5CB01L 1111 C0G 500V 8pF +/-0.25pF GQM22M5C2H8R0CB01L 1111 C0G 500V 8pF +/-0.5pF GQM22M5C2H8R0DB01L 1111 C0G 500V8 .2pF +/-0.25pF GQM22M5C2H8R2CB01L 1111 C0G 500V 9pF +/-0.25pF GQM22M5C2H9R0CB01L 1111 C0G 500V 9pF +/-0.5pF GQM22M5C2H9R0DB01L 1111 C0G 500V9 .1pF +/-0.25pF GQM22M5C2H9R1CB01L High Freq ue nc y GQM Series (1111 / C0G) GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering 30 – Innovator in Electronics C-29-C www.murata.com
Size TC WV Cap Cap Tol Murata Global P/N High Freq ue nc y GQM Series (1111 / C0G)
1111 C0G 500V 10pF+ /-2% GQM22M5C2H100GB01L
1111 C0G 500V 10pF+ /-5% GQM22M5C2H100JB01L
1111 C0G 500V 12pF+ /-2% GQM22M5C2H120GB01L
1111 C0G 500V 12pF+ /-5% GQM22M5C2H120JB01L
1111 C0G 500V 15pF+ /-2% GQM22M5C2H150GB01L
1111 C0G 500V 15pF+ /-5% GQM22M5C2H150JB01L
1111 C0G 500V 18pF+ /-2% GQM22M5C2H180GB01L
1111 C0G 500V 18pF+ /-5% GQM22M5C2H180JB01L
1111 C0G 500V 20pF+ /-2% GQM22M5C2H200GB01L
1111 C0G 500V 20pF+ /-5% GQM22M5C2H200JB01L
1111 C0G 500V 22pF +/-2% GQM22M5C2H220GB01L
1111 C0G 500V 22pF +/-5% GQM22M5C2H220JB01L
1111 C0G 500V 27pF +/-2% GQM22M5C2H270GB01L
1111 C0G 500V 27pF +/-5% GQM22M5C2H270JB01L
1111 C0G 500V 33pF +/-2% GQM22M5C2H330GB01L
1111 C0G 500V 33pF +/-5% GQM22M5C2H330JB01L
1111 C0G 500V 39pF +/-2% GQM22M5C2H390GB01L
1111 C0G 500V 39pF +/-5% GQM22M5C2H390JB01L
1111 C0G 500V 47pF +/-2% GQM22M5C2H470GB01L
1111 C0G 500V 47pF +/-5% GQM22M5C2H470JB01L
1111 C0G 500V 56pF +/-2% GQM22M5C2H560GB01L
1111 C0G 500V 56pF +/-5% GQM22M5C2H560JB01L
1111 C0G 500V 68pF +/-2% GQM22M5C2H680GB01L
1111 C0G 500V 68pF +/-5% GQM22M5C2H680JB01L
1111 C0G 500V 82pF +/-2% GQM22M5C2H820GB01L
1111 C0G 500V 82pF +/-5% GQM22M5C2H820JB01L
1111 C0G 500V 100pF +/-2% GQM22M5C2H101GB01L
1111 C0G 500V 100pF +/-5% GQM22M5C2H101JB01L
Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Innovator in Electronics – 31C-29-C www.murata.com
Specifications and Test Methods GQM Series Item Specification Test Method Operating Temperature ʵ55°C to 125°C Reference Temperature: 25°C Appearance No defects or abnormalities. Visual inspection. Dimension Within the specified dimensions. Using calipers. Dielectric Strength No defects or abnormalities. 250% of the rated voltage Insulation Resistance More than 10,000MΩ or 500ΩŋF . DC voltage not exceeding the rated voltage at 25°C and 75%RH max. and within 2 minutes of charging. Q 30pFmin.: Q>1400 Frequency 1±0.1MHz 30pFmax.: Q>800+20C Voltage 0.5 to 5Vrms C:Nominal Capacitance (pF) Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the test jig (glass epoxy board) then apply10N force in parallel with the test jig for 10±1sec. Vibration Resistance Appearance: No defects or abnormalities. Capacitance: Within the specified tolerance. 30pFmin.: Q >1400 30pFmax.: Q>800+20C ɹɹ C: Nominal Capacitance (pF) Frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions total of 6 hours). Deflection No crack or marked defect should occur. Flexure: 1mm Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Immerse in eutectic solder solution for 2±0.5 seconds at 230±5°C or Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C . Resistance to Soldering Heat Appearance: No marking defects Capacitance Change Within ±2.5% or ±0.25 pF(Whichever is larger) 30pFmin.: Q >1400 30pFmax.: Q>800+20C ɹɹ C: Nominal Capacitance (pF) Immerse the capacitor in a eutectic solder solution or Sn-3.0Ag-0.5Cu solder solution at 270±5°C for 10±0.5 seconds. Let sit at room temperature for 24±2 hours Temperature Cycle Appearance: No marking defects Capacitance Change Within ±2.5% or ± 0.25 pF (Whichever is larger) 30pFmin.: Q >1400 30pFmax.: Q>800+20C C:Nominal Capacitance (pF) ʵ55°C to 125°C Five cycles Humidity Steady State Appearance: No marking defects Capacitance Change Within ±5% or ± 0.5pF (Whichever is larger) 30pFmin.: Q >350 10pF - 30pF: Q>275+5C/2 10pFmax.: Q>200+10C ɹɹ C: Nominal Capacitance (pF) 40±2°C and 90 to 95% humidity for 500±12 hours. Humidity Load Appearance: No marking defects Capacitance Change Within ±7.5% or ±0.75 pF (Whichever is larger) 30pFmin.: Q >200 30pFmax.: Q>100+10C/3 ɹɹ C: Nominal Capacitance (puff) Apply the rated voltage at 40±2°C and 90 to 95% humidity for 500±12 hours. High Temperature Load Appearance: No marking defects Capacitance Change Within ±3% or ±0.3pF (Whichever is larger) 30pFmin.: Q >350 10pF - 30pF: Q>275+5C/2 10pFmax.: Q>200+10C ɹɹ C: Nominal Capacitance (pF) Apply 200% of the rated voltage for 1000±12 hours at the maximum operating temperature ±3°C. The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5 the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in Table A-1. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in steps 1, 3 and 5 by the cap. value in step 3. Capacitance Change: Within the specified tolerance. (Table A-1) Temperature Coefficent: Within the specified tolerance. (Table A-1) Capacitance Drift: Within ±0.2% or ±0.5pF (Whichever is larger) Capacitance Temperature Characteristics Step Temperature (oC) 1 25p2 2 -55p3 3 25p2 4 125p3 5 25p2 GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Specifications and Test Methods 32 – Innovator in Electronics C-29-C www.murata.com
Specifications and Test Methods GQM Series Item Specification Test Method Humidity Load Appearance: No marking defects Capacitance Change Within ±7.5% or ±0.75 pF (Whichever is larger) 30pFmin.: Q 200 30pFmax.: Q 100+10C/3 ɹɹ C: Nominal Capacitance (puff) Apply the rated voltage at 40±2°C and 90 to 95% humidity for 500±12 hours. High Temperature Load Appearance: No marking defects Capacitance Change Within ±3% or ±0.3pF (Whichever is larger) 30pFmin.: Q 350 10pF - 30pF: Q 275+5C/2 10pFmax.: Q 200+10C ɹɹ C: Nominal Capacitance (pF) Apply 150% of the rated voltage for 1000±12 hours at the maximum operating temperature ±3°C. Table A-1 Capacitance Change from 25°Cʢ%ʣ Note: Nominal values denote the temperature coefficient within a range of 25°C to 125°C. GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Specifications and Test Methods Innovator in Electronics – 33C-29-C www.murata.com
-2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 -75 -50 -25 0 25 50 75 100 125 150 Temperature (°C) Capacitance Change (%) Spec. (upper) Spec. (lower) C0G Characteristics (GQM) Capacitance – Temperature Characteristics GQM Series Resonant Frequency Characteristics G 10G 11 10 00 Capacit ance (pF) Resonant Frequency (Hz) 100M GQM187 GQM188/21 Measurement Equipment HP8720 GQM22 Capacitance - Temperature Characteristics Resonant Frequency Characteristics GQM Series Resonant Frequency Characteristics G 10G 11 10 00 Capacit ance (pF) Resonant Frequency (Hz) 100M GQM187 GQM188/21 Measurement Equipment HP8720 GQM22 GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) 34 – Innovator in Electronics C-29-C www.murata.com
0.01 0 .1 100M 1 000M 10000M Frequency (Hz) Frequency (Hz) Frequency (Hz) ESR (ohm) 1pF 10pF 47pF 1G 10G 0.01 0 .1 100M 1 000M 10000M ESR (ohm) 1pF 10pF 100pF 1G 10G GQM187 Series GQM21 Series GQM188 Series 0.01 0.1 100M 1000M 10000M ESR (ohm) 1pF 10pF 100pF 1G 10G Boonton Resonant Coaxial-Line 34A Measurement Equipment 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 47pF 1G 10G 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR(ohm) 1pF 10pF 100pF 1G 10G GQM187 Series GQM21 Series GQM188 Series 0.01 0.1 100M 1000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 100pF 1G 10G Boonton Resonant Coaxial-Line 34A Measurement Equipment ESR - Frequency Characteristics 0.01 0 .1 100M 1 000M 10000M Frequency (Hz) Frequency (Hz) Frequency (Hz) ESR (ohm) 1pF 10pF 47pF 1G 10G 0.01 0 .1 100M 1 000M 10000M ESR (ohm) 1pF 10pF 100pF 1G 10G GQM187 Series GQM21 Series GQM188 Series 0.01 0.1 100M 1000M 10000M ESR (ohm) 1pF 10pF 100pF 1G 10G Boonton Resonant Coaxial-Line 34A Measurement Equipment GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) Innovator in Electronics – 35C-29-C www.murata.com GQM188 Series GQM187 Series
0.01 0 .1 100M 1 000M 10000M Frequency (Hz) Frequency (Hz) Frequency (Hz) ESR (ohm) 1pF 10pF 47pF 1G 10G 0.01 0 .1 100M 1 000M 10000M ESR (ohm) 1pF 10pF 100pF 1G 10G GQM187 Series GQM21 Series GQM188 Series 0.01 0.1 100M 1000M 10000M ESR (ohm) 1pF 10pF 100pF 1G 10G Boonton Resonant Coaxial-Line 34A Measurement Equipment 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 47pF 1G 10G 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR(ohm) 1pF 10pF 100pF 1G 10G GQM187 Series GQM21 Series GQM188 Series 0.01 0.1 100M 1000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 100pF 1G 10G Boonton Resonant Coaxial-Line 34A Measurement Equipment ESR - Frequency Characteristics 0.01 0.1 100M 1G 10G Frequency (Hz) ESR (ohm) 1pF 10pF 100pF GQM21 Series (250V)GQM21 Series (250V) GQM21 Series (50V/100V) GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) 36 – Innovator in Electronics C-29-C www.murata.com
ESR - FREQUENCY (TYPICAL) 0.01 0.1 10G0001001 Frequency (Hz) ESR (ohm) 1pF 10pF 100pF 100M 1G ESR Frequency Characteristics 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 47pF 1G 10G 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR(ohm) 1pF 10pF 100pF 1G 10G GQM187 Series GQM21 Series GQM188 Series 0.01 0.1 100M 1000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 100pF 1G 10G Boonton Resonant Coaxial-Line 34A Measurement Equipment GQM22 Series (500V) GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) Innovator in Electronics – 37C-29-C www.murata.com
Frequency (Hz) Q 1pF 10pF 47pF 100 1000 10000 100M 1000M 10000M Frequency (Hz) Q 1pF 10pF 100pF 1G 10G GQM187 Series 100 1000 10000 100M 1000M 10000M Q 1pF 10pF 100pF 1G 10G GQM188 Series GQM21 Series (50V/100V) Measurement Equipment Boonton Resonant Coaxial-Line 34A Q - Frequency Characteristics Frequency (Hz) GQM21 Series (250V) 100 1000 10000 100M 10G Q - Frequency Characteristics GQM188 Series 1000M 10000M Frequency (Hz) Q 1pF 10pF 47pF 100 1000 10000 100M 1000M 10000M Frequency (Hz) Q 1pF 10pF 100pF 1G 10G GQM187 Series 100 1000 10000 100M 1000M 10000M Q 1pF 10pF 100pF 1G 10G GQM188 Series GQM21 Series (50V/100V) Measurement Equipment Boonton Resonant Coaxial-Line 34A Q - Frequency Characteristics Frequency (Hz) GQM21 Series (250V) 100 1000 10000 100M 10G 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 47pF 1G 10G 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR(ohm) 1pF 10pF 100pF 1G 10G GQM187 Series GQM21 Series GQM188 Series 0.01 0.1 100M 1000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 100pF 1G 10G Boonton Resonant Coaxial-Line 34A Measurement Equipment GQM187 Series GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) 38 – Innovator in Electronics C-29-C www.murata.com
0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 47pF 1G 10G 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR(ohm) 1pF 10pF 100pF 1G 10G GQM187 Series GQM21 Series GQM188 Series 0.01 0.1 100M 1000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 100pF 1G 10G Boonton Resonant Coaxial-Line 34A Measurement Equipment 1000M 10000M Frequency (Hz) Q 1pF 10pF 47pF 100 1000 10000 100M 1000M 10000M Frequency (Hz) Q 1pF 10pF 100pF 1G 10G GQM187 Series 100 1000 10000 100M 1000M 10000M Q 1pF 10pF 100pF 1G 10G GQM188 Series GQM21 Series (50V/100V) Measurement Equipment Boonton Resonant Coaxial-Line 34A Q - Frequency Characteristics Frequency (Hz) GQM21 Series (250V) 100 1000 10000 100M 10G Q - Frequency Characteristics 100 1000 10000 100M 1G 10G Frequency (Hz)z)z Q 1pF 10pF 100pF GQM21 Series (250V) GQM21 Series (50V/100V) GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) Innovator in Electronics – 39C-29-C www.murata.com
Q - FREQUENCY (TYPICAL) MURATA P/N: GQM22_500V Measuring equipment: Boonton Resonant Coaxial-Line 34 100 1000 10000 000010001001 Frequency (Hz) Q 1pF 10pF 100pF 100M 1G 10G GQM22 Series (500V) Q - Frequency Characteristics GQM22 Series (500V) 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 47pF 1G 10G 0.01 0 .1 100M 1 000M 10000M FREQUENCY (Hz) ESR(ohm) 1pF 10pF 100pF 1G 10G GQM187 Series GQM21 Series GQM188 Series 0.01 0.1 100M 1000M 10000M FREQUENCY (Hz) ESR (ohm) 1pF 10pF 100pF 1G 10G Boonton Resonant Coaxial-Line 34A Measurement Equipment GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) 40 – Innovator in Electronics C-29-C www.murata.com
Temperature Rise - Current Characteristics Current (Arms) 1pF 2pF 4pF 10pF GQM187 Series (1GHz) 1pF 2.4pF 7.5pF 10pF 22pF GQM188 Series (1GHz) Temperature Rise - Current Characteristics Temperature Rise (°C) Current (Arms) Temperature Rise (°C) Current (Arms) 1pF 2pF 4pF 10pF GQM187 Series (1GHz) 1pF 2.4pF 7.5pF 10pF 22pF GQM188 Series (1GHz) Temperature Rise - Current Characteristics Temperature Rise (°C) Current (Arms) Temperature Rise (°C) Current (Arms) 1pF 2pF 4pF 10pF GQM187 Series (1GHz) 1pF 2.4pF 7.5pF 10pF 22pF GQM188 Series (1GHz) Temperature Rise - Current Characteristics Temperature Rise (°C) Current (Arms) Temperature Rise (°C) GQM188 Series (1GHZ) GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) Innovator in Electronics – 41C-29-C www.murata.com
1.0pF 2.0pF 4.0pF 10pF GQM21 Series (1GHz) Current (Arms) Temperature Rise (°C) GQM21 Series (1GHz) GQM22 Series (1GHz) 1.2pF 4.7pF 10pF 22pF Current (Arms) Temperature Rise (°C) GQM22 Series (1GHz) GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) 42 – Innovator in Electronics C-29-C www.murata.com
Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. 1. Mounting Position Locate chip horizontal to the direction in which stress acts Chip arrangement Worst A-C-(B~D) Best Component Direction Chip Mounting Close to Board Separation Point A B D CPerforation Slit Continued on the following page. 2. Chip Placing An excessively low bottom dead point of the suction nozzle imposes great force on the chip during mounting, causing cracked chips. So adjust the suction nozzle's bottom dead point by correcting warp in the board. Normally, the suction nozzle's bottom dead point must be set on the upper surface of the board. Nozzle pressure for chip mounting must be a 1 to 3N static load. Dirt particles and dust accumulated between the suction nozzle and the cylinder inner wall prevent the nozzle from moving smoothly. This imposes great force on the chip during mounting, causing cracked chips. And the locating claw, when worn out, imposes uneven forces on the chip when positioning, causing cracked chips. The suction nozzle and the locating claw must be maintained, checked and replaced periodically. Board GuideCorrect Suction Nozzle Board Support Pin Incorrect Deflection ■ !Caution (Soldering and Mounting) !Caution !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
- This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ï This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, itís specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. ï This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C02E.pdf 07.2.6 Caution (Soldering and Mounting) GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Soldering and Mounting Innovator in Electronics – 43C-29-C www.murata.com
- ReflowSoldering When sudden heat is applied to the components, the mechanical strength of the components should go down because remarkable temperature change causes deformity inside components. In order to prevent mechanical damage in the components, preheating should be required for both of the components and the PCB board. Preheating conditions are showninTable 1.I tis required to keep temperature differential between the soldering and the components surface (∆T) as small as possible. Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (∆T) between the component and solvent within the range shown in theTable 1. GQM18/21 GQM22 0∆ T 19° C ∆T 130°C Part Number Temperature Differential Table1 Recommended Conditions Standard Conditions for Reflow Soldering Allowable Soldering Temperature and Time In case of repeated soldering, the accumulated soldering timemust be within the range shown above. Soldering Time(sec.) 260 270 280 250 240 230 220 03 06 09 01 20 Soldering Temperature(°C) Invertingthe PCB Make sure not to impose an abnormalmechanical shock on the PCB. Continued from thepreceding page. Continuedon the following page. Peak Temperature Atmosphere Pb-SnS older Infrared Reflow 230-250°C Air VaporR eflow 230-240°C Air Lead Free Solder 240-260°C Airo rN2 Infrared Reflow Vapor Reflow 60-120 seconds 30-60 seconds Gradual Cooling Soldering Preheating 200°C 170°C 150°C 130°C Time Temperature( °C) Peak Temperature 60-120 seconds2 0s econds max. Gradual Cooling Soldering Preheating 170°C 150°C 130°C Time Temperature( °C) Peak Temperature Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu OptimumS older Amount forR eflowS oldering Overly thick application of solder paste resultsin excessive fillet heightsolder. This makes the chip more susceptible to mechanical and thermal stress on the board and may cause the chips to crack Too little solder paste results inal acko fadhesive strength on the outer electrode, which may result in chips breaking loose from the PCB. Make sure the solder has been applied smoothly to the end surface toaheight of 0.2mm* min. Optimum Solder Amount for Reflow Soldering 0.2mm* min. the a *GRM 02/03: 1/3 of Chip Thickness min. GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Soldering and Mounting 44 – Innovator in Electronics C-29-C www.murata.com
Optimum Solder Amount for Flow Soldering The top of the solder fillet should be lower than the thickness of components. If the solder amount is excessively big, the risk of cracking is higher during board bending or under any other stressful conditions. 5. Flow Soldering When sudden heat is applied to the components, the mechanical strength of the components should go down because remarkable temperature change causes deformity inside components. And an excessively long soldering time or high soldering temperature results in leaching of the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact between electrodes and end termination. In order to prevent mechanical damage inthe components, preheating shoud be required for the both components and the PCB board. Preheating conditions are shown in T able 2. It is required to keep temperature differential between the soldering and the components surface ($T) as small as possible. When components are immersed in solvent after mounting, be sure to maintain the temperature difference between the component and solvent within the range shown in Table 2. Do not apply flow soldering to chips not listedin Table 2. GRM18/21/31 LLL21/31 ERB18/21 GQM18/21 $T-150% Part Number Temperature Differential Table 2 Standard Conditions for Flow Soldering Allowable Soldering Temperature and Time In case of repeated soldering, the accumulated soldering time must be within the range shown above. Soldering Time (sec.) 260 270 280 250 240 230 220 0 10 20 30 40 Soldering Temperature (%) Up to Chip Thickness Adhesive Continued from the preceding page. Continued on the following page. Recommended Conditions Peak Temperature Atmosphere Pb-Sn Solder 240-250oC Air Lead Free Solder 250-260oC 60-120 seconds 5 seconds max. Gradual Cooling Soldering Preheating 170oC 150oC 130oC Time Temperature (%) Peak Temperature Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu 4. Leaded Component Insertion If the PCB is flexed when leaded components (such as transformers and ICs) are being mounted, chips may crack and solder joints may break. Before mounting leaded components, support the PCB using backup pins or special jigs to prevent warping. Caution Note • Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
- This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
- This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
- This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Note C02E.pdf 07.2.6 Optimum Solder Amount for Flow Soldering The top of the solder fillet should be lower than the thickness of components. If the solder amount is excessively big, the risk of cracking is higher during board bending or under any other stressful conditions. 5. Flow Soldering When sudden heat is applied to the components, the mechanical strength of the components should go down because remarkable temperature change causes deformity inside components. And an excessively long soldering time or high soldering temperature results in leaching of the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact between electrodes and end termination. In order to prevent mechanical damage inthe components, preheating shoud be required for the both components and the PCB board. Preheating conditions are shown in T able 2. It is required to keep temperature differential between the soldering and the components surface ($T) as small as possible. When components are immersed in solvent after mounting, be sure to maintain the temperature difference between the component and solvent within the range shown in Table 2. Do not apply flow soldering to chips not listedin Table 2. GRM18/21/31 LLL21/31 ERB18/21 GQM18/21 $T-150% Part Number Temperature Differential Table 2 Standard Conditions for Flow Soldering Allowable Soldering Temperature and Time In case of repeated soldering, the accumulated soldering time must be within the range shown above. Soldering Time (sec.) 260 270 280 250 240 230 220 0 10 20 30 40 Soldering Temperature (%) Up to Chip Thickness Adhesive Continued from the preceding page. Continued on the following page. Recommended Conditions Peak Temperature Atmosphere Pb-Sn Solder 240-250oC Air Lead Free Solder 250-260oC 60-120 seconds 5 seconds max. Gradual Cooling Soldering Preheating 170oC 150oC 130oC Time Temperature (%) Peak Temperature Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu 4. Leaded Component Insertion If the PCB is flexed when leaded components (such as transformers and ICs) are being mounted, chips may crack and solder joints may break. Before mounting leaded components, support the PCB using backup pins or special jigs to prevent warping. Caution Note • Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
- This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
- This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
- This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Note C02E.pdf 07.2.6 GQM18/21 GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Soldering and Mounting Innovator in Electronics – 45C-29-C www.murata.com
- Correction with a Soldering Iron After soldering, do not allow the component/PCB to rapidly cool down. Table 3 *Applicable for both Pb-Sn and Lead Free Solder. Pb-Sn Solder: Sn-37Pb Optimum Solder amount when re-working with a Soldering lron Solder wire with ø0.5mm or smaller is required for soldering. When sudden heat is applied to the components when using a soldering iron, the mechanical strength of the components will decrease because the extreme temperature change can cause deformations inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions (the "Temperature of the Soldering Iron tip", "Preheating Temperature", "Temperature Differential" between the iron tip and the components and the PCB) should be within the conditions of Table 3. It is required to keep the temperature differential between the soldering Iron and the component surfaces (ΔT) as small as possible. ΔT 130Υ 350Υ max. 150 Υ min.Δ T 190Υ Air Part Number Temperature Differential (ΔT) Atmosphere GQM18/21 The operating time for the re-working should be as short as possible. When re-working time is too long, it may cause solder leaching, and that will cause a reduction in the adhesive strength of the terminations. Lead Free Solder: Sn-3.0Ag-0.5Cu In case of sizes smaller than 0603, (GQM18), the top of the solder fillet should be lower than 2/3's of the thickness of the component or 0.5mm whichever is smaller. In case of 0805 and larger sizes (GQM21/22), the top of the solder fillet should be lower than 2/3's of the thickness of the component. If the solder amount is excessive, the risk of cracking is higher during board bending or under any other stressful condition. A Soldering iron with a tip of ø3mm or smaller should be used. It is also necessary to keep the soldering iron from touching the components during the re-work. Air Temperature of Soldering Iron tip Preheating Temperature 0822 2 MQG Υ max. 150 Υ min. 㻭㻨㻰㻦㻱㻦㻐㻓㻓㻔㻕㻮 Excessive output of ultrasonic oscillationduring cleaning causes PCBs to resonate, resulting in crackedchips or broken solder. Take note notto vibrate PCBs. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE,I NASHORT CIRCUIT AND FUMING WHEN THE PRODUCT IS USED. 7. Washing Solder amount in section. GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Soldering and Mounting 46 – Innovator in Electronics C-29-C www.murata.com
■ High Q and Low ESR at VHF, UHF, and Microwave Frequencies ■ 0603 and 0805 sizes with Copper Inner Electrode ■ Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [C]=+/-0.25pF for 5 - 9pF, [F]=+/-1% for 10 - 20pF) ■ Low Power Consumption for Mobile Telecommunication ■ Base Stations, Broadcast Satellite and Special Radios No. Description Murata Global P/N Qty. 1 0603/C0G/0.50pF/100V GQM1885C2AR50CB01 20 2 0603/C0G/0.60pF/100V GQM1885C2AR60CB01 20 3 0603/C0G/0.70pF/100V GQM1885C2AR70CB01 20 4 0603/C0G/0.80pF/100V GQM1885C2AR80CB01 20 5 0603/C0G/0.90pF/100V GQM1885C2AR90CB01 20 6 0603/C0G/1.0pF/100V GQM1885C2A1R0CB01 20 7 0603/C0G/1.1pF/100V GQM1885C2A1R1CB01 20 8 0603/C0G/1.2pF/100V GQM1885C2A1R2CB01 20 9 0603/C0G/1.3pF/100V GQM1885C2A1R3CB01 20 10 0603/C0G/1.5pF/100V GQM1885C2A1R5CB01 20 11 0603/C0G/1.6pF/100V GQM1885C2A1R6CB01 20 12 0603/C0G/1.8pF/100V GQM1885C2A1R8CB01 20 13 0603/C0G/2.0pF/100V GQM1885C2A2R0CB01 20 14 0603/C0G/2.2pF/100V GQM1885C2A2R2CB01 20 15 0603/C0G/2.4pF/100V GQM1885C2A2R4CB01 20 16 0603/C0G/2.7pF/100V GQM1885C2A2R7CB01 20 17 0603/C0G/3.0pF/100V GQM1885C2A3R0CB01 20 18 0603/C0G/3.3pF/100V GQM1885C2A3R3CB01 20 19 0603/C0G/3.6pF/100V GQM1885C2A3R6CB01 20 20 0603/C0G/3.9pF/100V GQM1885C2A3R9CB01 20 21 0603/C0G/4.3pF/100V GQM1885C2A4R3CB01 20 22 0603/C0G/4.7pF/100V GQM1885C2A4R7CB01 20 23 0603/C0G/5.1pF/100V GQM1885C2A5R1DB01 20 24 0603/C0G/5.6pF/100V GQM1885C2A5R6DB01 20 25 0603/C0G/6.2pF/100V GQM1885C2A6R2DB01 20 26 0603/C0G/6.8pF/100V GQM1885C2A6R8DB01 20 27 0603/C0G/7.5pF/50V GQM1885C1H7R5DB01 20 28 0603/C0G/8.2pF/50V GQM1885C1H8R2DB01 20 29 0603/C0G/9.1pF/50V GQM1885C1H9R1DB01 20 30 0603/C0G/10pF/50V GQM1885C1H100JB01 20 31 0603/C0G/12pF/50V GQM1885C1H120JB01 20 32 0603/C0G/15pF/50V GQM1885C1H150JB01 20 33 0603/C0G/18pF/50V GQM1885C1H180JB01 20 34 0603/C0G/22pF/50V GQM1885C1H220JB01 20 35 0603/C0G/27pF/50V GQM1885C1H270JB01 20 36 0603/C0G/33pF/50V GQM1885C1H330JB01 20 37 0603/C0G/39pF/50V GQM1885C1H390JB01 20 38 0603/C0G/47pF/50V GQM1885C1H470JB01 20 39 0603/C0G/68pF/50V GQM1885C1H680JB01 20 40 0603/C0G/100pF/50V GQM1885C1H101JB01 20 GQM18-HIQ0603KIT-E CERAMIC CHIP CAPACITORS ASCAP Hi-Frequency 0603 (50 to 100 VDC) 0603 (250 VDC) ■ High Q and Low ESR at VHF, UHF, and Microwave Frequencies ■ 0603 size with Copper Inner Electrode ■ Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [F]=+/-1% for 10 - 20pF) ■ Low Power Consumption for Mobile Telecommunication ■ Base Stations, Broadcast Satellite and Special Radios No. Description Murata Global P/N Qty. 1 0603/C0G/0.10pF/250V GQM1875C2ER10BB12 20 2 0603/C0G/0.30pF/250V GQM1875C2ER30BB12 20 3 0603/C0G/0.50pF/250V GQM1875C2ER50BB12 20 4 0603/C0G/0.60pF/250V GQM1875C2ER60BB12 20 5 0603/C0G/0.70pF/250V GQM1875C2ER70BB12 20 6 0603/C0G/0.80pF/250V GQM1875C2ER80BB12 20 7 0603/C0G/0.90pF/250V GQM1875C2ER90BB12 20 8 0603/C0G/1.0pF/250V GQM1875C2E1R0BB12 20 9 0603/C0G/1.1pF/250V GQM1875C2E1R1BB12 20 10 0603/C0G/1.2pF/250V GQM1875C2E1R2BB12 20 11 0603/C0G/1.3pF/250V GQM1875C2E1R3BB12 20 12 0603/C0G/1.6pF/250V GQM1875C2E1R6BB12 20 13 0603/C0G/1.8pF/250V GQM1875C2E1R8BB12 20 14 0603/C0G/2.2pF/250V GQM1875C2E2R2BB12 20 15 0603/C0G/2.4pF/250V GQM1875C2E2R4BB12 20 16 0603/C0G/3.0pF/250V GQM1875C2E3R0BB12 20 17 0603/C0G/3.3pF/250V GQM1875C2E3R3BB12 20 18 0603/C0G/3.6pF/250V GQM1875C2E3R6BB12 20 19 0603/C0G/3.9pF/250V GQM1875C2E3R9BB12 20 20 0603/C0G/4.3pF/250V GQM1875C2E4R3BB12 20 21 0603/C0G/4.7pF/250V GQM1875C2E4R7BB12 20 22 0603/C0G/5.1pF/250V GQM1875C2E5R1BB12 20 23 0603/C0G/5.6pF/250V GQM1875C2E5R6BB12 20 24 0603/C0G/6.2pF/250V GQM1875C2E6R2BB12 20 25 0603/C0G/6.8pF/250V GQM1875C2E6R8BB12 20 26 0603/C0G/7.5pF/250V GQM1875C2E7R5BB12 20 27 0603/C0G/9.1pF/250V GQM1875C2E9R1BB12 20 28 0603/C0G/10pF/250V GQM1875C2E100JB12 20 29 0603/C0G/12pF/250V GQM1875C2E120JB12 20 30 0603/C0G/15pF/250V GQM1875C2E150JB12 20 31 0603/C0G/22pF/250V GQM1875C2E220JB12 20 32 0603/C0G/27pF/250V GQM1875C2E270JB12 20 33 0603/C0G/33pF/250V GQM1875C2E330JB12 20 34 0603/C0G/39pF/250V GQM1875C2E390JB12 20 35 0603/C0G/47pF/250V GQM1875C2E470JB12 20 GQM18-HIQ250VKIT-E GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Design Engineering Kits Innovator in Electronics – 47C-29-C www.murata.com
■ High Q and Low ESR at VHF, UHF, and Microwave Frequencies ■ 0603 and 0805 sizes with Copper Inner Electrode ■ Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [C]=+/-0.25pF for 5 - 9pF, [F]=+/-1% for 10 - 20pF) ■ Low Power Consumption for Mobile Telecommunication ■ Base Stations, Broadcast Satellite and Special Radios No. Description Murata Global P/N Qty. 1 0805/C0G/0.50pF/100V GQM2195C2AR50CB01 20 2 0805/C0G/0.60pF/100V GQM2195C2AR60CB01 20 3 0805/C0G/0.70pF/100V GQM2195C2AR70CB01 20 4 0805/C0G/0.80pF/100V GQM2195C2AR80CB01 20 5 0805/C0G/0.90pF/100V GQM2195C2AR90CB01 20 6 0805/C0G/1.0pF/100V GQM2195C2A1R0CB01 20 7 0805/C0G/1.1pF/100V GQM2195C2A1R1CB01 20 8 0805/C0G/1.2pF/100V GQM2195C2A1R2CB01 20 9 0805/C0G/1.3pF/100V GQM2195C2A1R3CB01 20 10 0805/C0G/1.5pF/100V GQM2195C2A1R5CB01 20 11 0805/C0G/1.6pF/100V GQM2195C2A1R6CB01 20 12 0805/C0G/1.8pF/100V GQM2195C2A1R8CB01 20 13 0805/C0G/2.0pF/100V GQM2195C2A2R0CB01 20 14 0805/C0G/2.2pF/100V GQM2195C2A2R2CB01 20 15 0805/C0G/2.4pF/100V GQM2195C2A2R4CB01 20 16 0805/C0G/2.7pF/100V GQM2195C2A2R7CB01 20 17 0805/C0G/3.0pF/100V GQM2195C2A3R0CB01 20 18 0805/C0G/3.3pF/100V GQM2195C2A3R3CB01 20 19 0805/C0G/3.6pF/100V GQM2195C2A3R6CB01 20 20 0805/C0G/3.9pF/100V GQM2195C2A3R9CB01 20 21 0805/C0G/4.3pF/100V GQM2195C2A4R3CB01 20 22 0805/C0G/4.7pF/100V GQM2195C2A4R7CB01 20 23 0805/C0G/5.1pF/100V GQM2195C2A5R1DB01 20 24 0805/C0G/5.6pF/100V GQM2195C2A5R6DB01 20 25 0805/C0G/6.2pF/100V GQM2195C2A6R2DB01 20 26 0805/C0G/6.8pF/100V GQM2195C2A6R8DB01 20 27 0805/C0G/7.5pF/100V GQM2195C2A7R5DB01 20 28 0805/C0G/8.2pF/100V GQM2195C2A8R2DB01 20 29 0805/C0G/9.1pF/100V GQM2195C2A9R1DB01 20 30 0805/C0G/10pF/100V GQM2195C2A100JB01 20 31 0805/C0G/12pF/100V GQM2195C2A120JB01 20 32 0805/C0G/15pF/100V GQM2195C2A150JB01 20 33 0805/C0G/18pF/100V GQM2195C2A180JB01 20 34 0805/C0G/22pF/50V GQM2195C1H220JB01 20 35 0805/C0G/27pF/50V GQM2195C1H270JB01 20 36 0805/C0G/33pF/50V GQM2195C1H330JB01 20 37 0805/C0G/39pF/50V GQM2195C1H390JB01 20 38 0805/C0G/47pF/50V GQM2195C1H470JB01 20 39 0805/C0G/68pF/50V GQM2195C1H680JB01 20 40 0805/C0G/100pF/50V GQM2195C1H101JB01 20 GQM21-HIQ0805KIT-E CERAMIC CHIP CAPACITORS ASCAP Hi-Frequency 0805 (50 to 100 VDC) 0805 (250 VDC) ■ High Q and Low ESR at VHF, UHF, and Microwave Frequencies ■ 0805 size (250 VDC) with Copper Inner Electrode ■ Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [C]=+/-0.25pF for 5 - 9pF, [F]=+/-1% for 10 - 20pF) ■ Low Power Consumption for Mobile Telecommunication ■ Base Stations, Broadcast Satellite and Special Radios No. Description Murata Global P/N Qty. 1 0805/C0G/0.50pF/250V GQM2195C2ER50BB12 20 2 0805/C0G/0.60pF/250V GQM2195C2ER60BB12 20 3 0805/C0G/0.70pF/250V GQM2195C2ER70BB12 20 4 0805/C0G/0.80pF/250V GQM2195C2ER80BB12 20 5 0805/C0G/0.90pF/250V GQM2195C2ER90BB12 20 6 0805/C0G/1.0pF/250V GQM2195C2E1R0BB12 20 7 0805/C0G/1.1pF/250V GQM2195C2E1R1BB12 20 8 0805/C0G/1.2pF/250V GQM2195C2E1R2BB12 20 9 0805/C0G/1.3pF/250V GQM2195C2E1R3BB12 20 10 0805/C0G/1.5pF/250V GQM2195C2E1R5BB12 20 11 0805/C0G/1.6pF/250V GQM2195C2E1R6BB12 20 12 0805/C0G/1.8pF/250V GQM2195C2E1R8BB12 20 13 0805/C0G/2.0pF/250V GQM2195C2E2R0BB12 20 14 0805/C0G/2.2pF/250V GQM2195C2E2R2BB12 20 15 0805/C0G/2.4pF/250V GQM2195C2E2R4BB12 20 16 0805/C0G/2.7pF/250V GQM2195C2E2R7BB12 20 17 0805/C0G/3.0pF/250V GQM2195C2E3R0BB12 20 18 0805/C0G/3.3pF/250V GQM2195C2E3R3BB12 20 19 0805/C0G/3.6pF/250V GQM2195C2E3R6BB12 20 20 0805/C0G/3.9pF/250V GQM2195C2E3R9BB12 20 21 0805/C0G/4.3pF/250V GQM2195C2E4R3BB12 20 22 0805/C0G/4.7pF/250V GQM2195C2E4R7BB12 20 23 0805/C0G/5.1pF/250V GQM2195C2E5R1BB12 20 24 0805/C0G/5.6pF/250V GQM2195C2E5R6BB12 20 25 0805/C0G/6.2pF/250V GQM2195C2E6R2BB12 20 26 0805/C0G/6.8pF/250V GQM2195C2E6R8BB12 20 27 0805/C0G/7.5pF/250V GQM2195C2E7R5BB12 20 28 0805/C0G/8.2pF/250V GQM2195C2E8R2BB12 20 29 0805/C0G/9.1pF/250V GQM2195C2E9R1BB12 20 30 0805/C0G/10pF/250V GQM2195C2E100JB12 20 31 0805/C0G/12pF/250V GQM2195C2E120JB12 20 32 0805/C0G/15pF/250V GQM2195C2E150JB12 20 33 0805/C0G/18pF/250V GQM2195C2E180JB12 20 34 0805/C0G/22pF/250V GQM2195C2E220JB12 20 35 0805/C0G/27pF/250V GQM2195C2E270JB12 20 36 0805/C0G/33pF/250V GQM2195C2E330JB12 20 37 0805/C0G/39pF/250V GQM2195C2E390JB12 20 38 0805/C0G/47pF/250V GQM2195C2E470JB12 20 39 0805/C0G/68pF/250V GQM2195C2E680JB12 20 40 0805/C0G/100pF/250V GQM2195C2E101JB12 20 GQM21-HIQ250VKIT-E GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Design Engineering Kits 48 – Innovator in Electronics C-29-C www.murata.com www.murata.com www.murata.com
1111 (500 VDC) ■ High Q and Low ESR at VHF, UHF, and Microwave Frequencies ■ 1111 size (500 VDC) with Copper Inner Electrode ■ Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [C]=+/-0.25pF for 5 - 9pF, [F]=+/-1% for 10 - 20pF) ■ Low Power Consumption for Mobile Telecommunication ■ Base Stations, Broadcast Satellite and Special Radios No. Description Murata Global P/N Qty. 1 1111/C0G/0.50pF/500V GQM22M5C2HR50BB01L 20 2 1111/C0G/0.60pF/500V GQM22M5C2HR60BB01L 20 3 1111/C0G/0.70pF/500V GQM22M5C2HR70BB01L 20 4 1111/C0G/0.80pF/500V GQM22M5C2HR80BB01L 20 5 1111/C0G/0.90pF/500V GQM22M5C2HR90BB01L 20 6 1111/C0G/1.0pF/500V GQM22M5C2H1R0BB01L 20 7 1111/C0G/1.1pF/500V GQM22M5C2H1R1BB01L 20 8 1111/C0G/1.2pF/500V GQM22M5C2H1R2BB01L 20 9 1111/C0G/1.3pF/500V GQM22M5C2H1R3BB01L 20 10 1111/C0G/1.5pF/500V GQM22M5C2H1R5BB01L 20 11 1111/C0G/1.6pF/500V GQM22M5C2H1R6BB01L 20 12 1111/C0G/1.8pF/500V GQM22M5C2H1R8BB01L 20 13 1111/C0G/2.0pF/500V GQM22M5C2H2R0BB01L 20 14 1111/C0G/2.2pF/500V GQM22M5C2H2R2BB01L 20 15 1111/C0G/2.4pF/500V GQM22M5C2H2R4BB01L 20 16 1111/C0G/2.7pF/500V GQM22M5C2H2R7BB01L 20 17 1111/C0G/3.0pF/500V GQM22M5C2H3R0BB01L 20 18 1111/C0G/3.3pF/500V GQM22M5C2H3R3BB01L 20 19 1111/C0G/3.6pF/500V GQM22M5C2H3R6BB01L 20 20 1111/C0G/3.9pF/500V GQM22M5C2H3R9BB01L 20 21 1111/C0G/4.3pF/500V GQM22M5C2H4R3BB01L 20 22 1111/C0G/4.7pF/500V GQM22M5C2H4R7BB01L 20 23 1111/C0G/5.1pF/500V GQM22M5C2H5R1BB01L 20 24 1111/C0G/5.6pF/500V GQM22M5C2H5R6BB01L 20 25 1111/C0G/6.2pF/500V GQM22M5C2H6R2BB01L 20 26 1111/C0G/6.8pF/500V GQM22M5C2H6R8BB01L 20 27 1111/C0G/7.5pF/500V GQM22M5C2H7R5BB01L 20 28 1111/C0G/8.2pF/500V GQM22M5C2H8R2BB01L 20 29 1111/C0G/9.1pF/500V GQM22M5C2H9R1BB01L 20 30 1111/C0G/10pF/500V GQM22M5C2H100JB01L 20 31 1111/C0G/12pF/500V GQM22M5C2H120JB01L 20 32 1111/C0G/15pF/500V GQM22M5C2H150JB01L 20 33 1111/C0G/18pF/500V GQM22M5C2H180JB01L 20 34 1111/C0G/22pF/500V GQM22M5C2H220JB01L 20 35 1111/C0G/27pF/500V GQM22M5C2H270JB01L 20 36 1111/C0G/33pF/500V GQM22M5C2H330JB01L 20 37 1111/C0G/39pF/500V GQM22M5C2H390JB01L 20 38 1111/C0G/47pF/500V GQM22M5C2H470JB01L 20 39 1111/C0G/68pF/500V GQM22M5C2H680JB01L 20 40 1111/C0G/100pF/500V GQM22M5C2H101JB01L 20 GQM22-HIQ1111KIT-E ©2010 Murata Electronics N.A., Inc. GQM Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Design Engineering Kits Innovator in Electronics – 49C-29-C www.murata.com