12TQ045S

12TQ IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Bulletin PD-20239 rev. B 12/01 1www.irf.com Major Ratings and Characteristics IF(AV) Rectangular 15 A waveform VRRM range 35 to 45 V IFSM @ tp = 5 µs sine 990 A VF @ 15 Apk, TJ = 125°C 0.50 V TJ range - 55 to 150 °C Characteristics 12TQ Units Description/ Features The 12TQ... Schottky rectifier series has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C T J operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability IF(AV) = 15Amp VR = 35 to 45V 12TQ... 12TQ...S Case Styles 12TQ... TO-220AC 12TQ... S D2PAK Anode 1 3 Base Cathode N/CAnode 1 3 C athode Base Cathode

12TQ... Series Bulletin PD-20239 rev. B 12/01 www.irf.com VFM Max. Forward Voltage Drop (1) 0.56 V @ 15A * See Fig. 1 0.71 V @ 30A

0.50 V @ 15A

0.64 V @ 30A

IRM Max. Reverse Leakage Current (1) 1.75 mA T J = 25 °C * See Fig. 2 70 mA T J = 125 °C CT Max. Junction Capacitance 900 pF V R = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 8.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/ µs (Rated VR) TJ = 25 °C TJ = 125 °C VR = rated VR Electrical Specifications Parameters 12TQ Units Conditions (1) Pulse Width < 300µs, Duty Cycle < 2% TJ Max. Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance Junction 2.0 °C/W DC operation * See Fig. 4 to Case RthCS Typical Thermal Resistance, Case to 0.50 °C/W Mounting surface, smooth and greased Heatsink wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Thermal-Mechanical Specifications Parameters 12TQ Units Conditions IF(AV) Max. Average Forward Current 15 A 50% duty cycle @ T C = 120° C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 990 5µs Sine or 3µs Rect. pulse Surge Current * See Fig. 7 250 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 16 mJ T J = 25 °C, IAS = 2 .4 Amps, L = 5.5 mH IAR Repetitive Avalanche Current 2.4 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Parameters 12TQ Units Conditions Absolute Maximum Ratings A Following any rated load condition and with rated VRRM applied Kg-cm (Ibf-in) Voltage Ratings Part number 12TQ035 12TQ040 12TQ045 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 35 40 45

12TQ... Series Bulletin PD-20239 rev. B 12/01 www.irf.com Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics .001 .01 100 1000 0 5 10 15 20 25 30 35 40 4 5 R R 125°C 100°C 75°C 50°C 25°C Reverse Voltage - V (V) Reverse Current - I (mA) T = 150°CJ 100 1000 0 1 02 03 04 05 0 T = 25°CJ Reverse Voltage - V (V)R TJunction C apacitance - C (pF) .001 .01 D = 0. 33 D = 0. 50 D = 0. 25 D = 0. 17 D = 0. 08 thJC t , R ectangular P ulse Duration (Seconds) Thermal Impedance - Z (°C/W) S ingle Pulse (Thermal Resistance) PDM Not es: 1. D uty factor D = t / t 2. Peak T = P x Z + T JD Mt h J C C Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 1000 FM FInstantaneous Forward C urrent - I (A ) Forward Voltage Drop - V (V) T = 150°C T = 125°C T = 25°C J J J

12TQ... Series Bulletin PD-20239 rev. B 12/01 www.irf.com Fig. 8 - Unclamped Inductive Test Circuit Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current 02468 1 0 1 2 1 4 1 6 1 8 2 0 2 2 DC Average Power Loss - (Watts) F(AV) D = 0. 08 D = 0. 17 D = 0. 25 D = 0. 33 D = 0. 50 RMS Li mit Average Forward C urrent - I (A ) 115 125 135 145 155 0 4 8 12 16 20 24 DC Allowable Case Temperature - (°C) Average Forward Current - I (A)F(AV) 12TQ R (DC) = 2.0°C/WthJC 100 1000 10 100 1000 10000 FSM p Non-Repetitive Surge Current - I (A) At Any Rated Load Condition And With Rated V Applied Following Surge RRM Square Wave Pulse Duration - t (microsec) FREE-WHEEL DIO DE 40HFL40S02CURRENT MONITOR HIGH-SPEED SWITCHIRFP460 L DUT Rg = 25 ohm Vd = 25 Volt+

12TQ... Series Bulletin PD-20239 rev. B 12/01 www.irf.com Outline Table Conform to JEDEC outline TO-220AC Dimensions in millimeters and (inches) 3.78 (0.15) 3.54 (0.14) 10.54 (0.41) MAX. DIA. 15.24 (0.60) 14.84 (0.58) 2.92 (0.11) 2.54 (0.10) TERM 2 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 0.94 (0.04) 0.69 (0.03) 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.48 (0.25) 6.23 (0.24) 0.10 (0.004) 1.40 (0.05) 1.15 (0.04) 2.89 (0.11) 2.64 (0.10) 2.04 (0.080) MAX. Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) 10.16 (0.40) REF. 8.89 (0.35) 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MA X. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 6.18 (0.24)93° REF. 2.61 (0.10) 2.32 (0.09) 5.28 (0.21) 4.78 (0.19) 4.69 (0.18) 4.20 (0.16) 0.55 (0.02) 0.46 (0.02) 14.73 (0.58) 15.49 (0.61) 1.40 (0.055) 1.14 (0.045)3X 0.93 (0.37) 0.69 (0.27)2X 11.43 (0.45) 17.78 (0.70) 8.89 (0.35) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) MINIMUM RECOMMENDED FOOTPRINT Anode 1 3 Cathode Base Cathode Anode 1 3 Base Cathode N /C

12TQ... Series Bulletin PD-20239 rev. B 12/01 www.irf.com Marking Information 12TQ045S THIS IS A 12TQ045-S LOT CODE 8024 ASSEMBLED ON WW 02, 2000 IN THE ASSEMBLY LINE "L" ASSEMBLY LOT CODE INTERNATIONAL RECTIFIER LOGO PART NUMBER DATE CODE YEAR 0 = 2000 WEEK 02 LINE L TRR FEED DIRECTION TRL FEED DIRECTION 10.90 (0.429) 15.90 (0.626) 1.75 (0.069) 1.25 (0.049) 1.85 (0.073) 1.65 (0.065) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 1.60 (0.063) 1.50 (0.059) DIA. 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 4.72 (0.186) 4.52 (0.178) 24.30 (0.957) 23.90 (0.941) 0.368 (0.0145) 0.342 (0.0135) 360 (14.173) DIA. MAX. 26.40 (1.039) 24.40 (0.961) 13.50 (0.532) 12.80 (0.504) DIA. 60 (2.362) DI A. MI N. SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and TRR. Dimensions in millimeters and (inches) Tape & Reel Information

12TQ... Series Bulletin PD-20239 rev. B 12/01 www.irf.com Ordering Information Table Device Code 1 524 3 1 - Essential Part Number 2 - T = TO-220 3 - Q = Schottky Q Series 4 - Voltage Rating 5 -S = D 2Pak

12 T Q 045 S

035 = 35V 040 = 40V 045 = 45V IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.