12R105OPXX38N5HCB4 ELMA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

12R1 Rugged Chassis - Low Weight

FEATURES

■ VME, VME64x, VXS, VPX and cPCI compatible ■ Ideal for airborne applications where weight is a premium ■ 20-25% less weight than comparable rugged chassis ■ 2U-10U heights, horizontal or vertical card orientation options ■ Complete EMC integrity via braided gasketing and honeycomb filtering, blind-riveting design ■ Rugged chassis shell made of aluminum frames and extruded profiles ■ 350-1400 watt power supplies ■ 90 - 264 V AC input, 47 - 500 Hz with optional 28V/48V DC input ■ Wide range of backplane options 2-20 slots ■ Compliant to IEEE 1101.10/.11 mechanical specifications ■ Configurable IO patch panel on rear ■ Rear mounted fans (pull-configuration) standard ■ Standard voltage and system monitoring LEDs ■ Shelf management option ■ Tested for shock, vibration, and structural integrity ■ Withstands 15 G’s 11ms (shock and vibration resistance) ■ Custom configurations available PRODUCT INFORMATION The 12R1 platform is a lighter version of the 12R2 platform and is used for rugged applications with weight restrictions and less stringent shock and vibration requirements. The modular 12R1 platforms range from 2U to 10U height with horizontal and vertical board ori en- tations. The all-aluminum shell design consists of extrusion and sheet metal, joint together with stainless steel screws. The c hemical conversion coating provides corrosion protection and electrical conductivity. Custom paint finishes are also available. A hinge d front panel ensures unobstructed access to boards and drives. Located on the rear is a large patch panel for I/O connection. Exceptio nal front-to-rear cooling is achieved by a rear evacuative cooling system employing high CFM blowers. Additional fans may be instal led under the card cage in applications with high impedence boards. To meet IP53 (spray water) according to IEC 60529, louved air i ntake and exhaust openings are available upon request. Depth Heights Width Weight 22", 25" 3U (8.71") 7U (13.96") 10U (17.46") Custom 17.1" (19" Rack Mount) 3U 45 lb. Typ. 7U 60 lb. Typ. 10U 70 lb. Typ. Frequency Voltage Input Power Outputs 47-500Hz 90-264 VAC 28/48 VDC 300W-14000W +5V, +3.3V, +/-12V Operating Temp. Storage Temp. Humidity Altitude Shock Vibration Acceleration Sand and Dust Salt/Fog Fungus 0°C to 65°C -20°C to 85°C 0 to 95%, non-condensing -1,200 to 18,000 Ft. 15Gs 11ms 2.5Gs RMS 15 to 2000Hz 3Gs w/o disk Blowing Limited Limited PHYSICAL ELECTRICAL ENVIRONMENT AL 12R1 SPECIFICATIONS 4www.elma.com

■ 3U h x 25" d ■ Holds 5, 6U x 160mm cards, shock isolated, horizontal ■ 5 slot VME64x backplane w/P0 ■ Holds 1 x 3.5" and 1 x 5.25" HH device ■ 350 watt, 90-264VAC Fixed PSU, 47-500 Hz 12R105OPXX38N5HCB4 Description Order Number ■ 7U h x 22" d ■ Holds 5, 6U x 160mm cards, shock isolated, vertical ■ 7 slot VME64x backplane w/P0 ■ Holds 1 x 3.5" and 1 x 5.25" HH device ■ Fixed mount devices ■ 750 watt, 90-264VAC Fixed PSU, 47-500 Hz 12R107OP9F78N5VGD Description Order Number ■ 10U h x 22" d ■ Holds 5, 6U x 160mm cards, shock isolated, vertical ■ 20 slot VME64x backplane w/P0 ■ Holds 1 x 3.5" and 1 x 5.25" HH device ■ 750 watt, 90-264VAC Fixed PSU, 47-500 Hz 12R120PXA8Y5VCJ2 Description Order Number

❑❑ NUMBER OF SLOTS BP 00-20: Single BP AY-YA: Split Example: 7 slot = 07 Example: 12 + 9 = LI ❑ BP BARE BOARD A = CPCI (RSS), 6U K = VITA 31.1 L = VXS (DS) M = V64, J12 mono, 3 row N = VME64X, 6U O = VME64X, 7U P = VPX, 6U (VITA 46) W = VPX, 3U (VITA 46) S = VXS (SS) T = VXS (Mesh) U = CPCI Express, 3U X = No BP installed Z = Custom ❑ BP CONNECTOR CONFIG. J1/J2/P0 L = 5 row, w/o P0, w/ RT-2 M = 3 row, J1 flush, J2 13mm N = 3 row, J1/J2, 17mm O = 5 row, w/o PO P = 5 row, w/ PO Q = 3 row, 13mm R = 3 row, 17mm S = RT-2 (J0-J6) 6U U = RT-2 (J0-J2) 3U D = CPCI (P1 & P2 S; P3, P4, P5 L) X = No connectors Z = Custom ❑ DRIVES 1 = 1 x 3.5" 2 = 2 x 3.5" 3 = 1 x 5.25" HH 4 = 2 x 5.25" HH 5 = 4 x 5.25" HH 6 = 2 x 3.5", 1 x 5.25" HH 7 = 1 x 3.5", 2 x 5.25" HH 8 = 2 x 3.5", 2 x 5.25" HH 9 = 1 x 3.5", 1 x 5.25" HH A = 1 x 2.5", 1 x CDROM (SL) B = 2 x 2.5" C = 6 x 5.25" HH X = Not installed ❑ DEVICE MOUNTING F = Fixed mount devices I = Shock isolated devices X = N/A ❑ HEIGHT 2 = 2U 3 = 3U 4 = 4U 5 = 5U 6 = 6U 7 = 7U 8 = 8U A = 10U ❑ WIDTH 8 = 84T ❑ CARD CAGE Y = Fixed w/ Rear I/O N = Fixed no Rear I/O F = Isolated w/ Rear I/O I = Isolated no Rear I/O ❑ DEPTH 3 = 300mm - 399mm 4 = 400mm - 499mm (22") 5 = 500mm - 599mm (25") ❑ CARD ORIENTATION V = Vertical H = Horizontal T = Top Load 12R1 Order Key WIDTHHEIGHT DEVICE MOUNTING DRIVES CARD CAGE SLOTS DEPTH BP CONNECTORS CARD ORIENT ATI ON PSU INPUTPSU OUTPUT SHIELDING BP BARE BOARD PRODUCT CODE ❑ PSU INPUT C = 90-264VAC (Fixed) G = 90-264VAC (Plug in) H = 48VDC (Plug in) I = 28VDC (Plug in) K = 48VDC (Fixed) M = 48VDC (2 x HS, N+1) N = 24VDC (Fixed) O = 24VDC (2 x HS, N+1) P = 90-264VAC (2 x HS, N+1) Q = MIL-STD-704A, 28VDC R = MIL-STD-704A, 90-230VAC X = No PSU ❑ PSU OUTPUT (Note: Not all PSU combinations available) 1 = 150 watt (w/o 3.3V) 2 = 250 watt (4U, 6U or Fixed) 3 = 300 watt (4U/6U, ATX) 4 = 350 watt (6U x 8T, Plug in) 5 = 350 watt (Brick, w/o 3.3V) 6 = 500 watt (Brick, w/o 3.3V) 7 = 300 (4U or 6U, PS2 Hot Swap) 8 = 500 watt (6U x 4T, Plug in) 9 = 750 watt (Brick, w/o 3.3V) A = 250 watt (Brick, w/ 3.3V) B = 300-500 watt (Brick, w/3.3V)* C = 500 watt (Brick, w/3.3V) D = 750 watt (Brick, w/3.3V) E = 900 watt (2 x Brick, w/3.3V) F = 1000 watt (Brick, w/ 3.3V)* G = 1200 watt (Brick, w/ 3.3V)* H = 1400 watt (Brick, w/3.3V)* X = Not installed ❑ SHIELDING LEVEL 2 = Level 2 4 = MIL-STD-461 X = Not installed 6www.elma.com