12LP10 SENSATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- GFCI Outlet – Provides 120 VAC output as well as receptacle protection.
- Unit Protection – Provides automatic electronic short circuit/ overload protection, automatic over-temperature shutdown, and an AC output circuit breaker.
- Status LED – Provides inverter operation mode and troubleshooting information at a glance.
- Low Battery Protection – Automatically shuts down at 10.5 VDC with in-rush delay. The end user may also select an optional setting of 11.7 VDC.
- Battery Surge Protection – The 12LP10 has an input DC voltage range of 10.5 - 16 volts. The inverter can tolerate up to 24 VDC for five minutes, then will shut down to preserve the system.
- Auto Sleep Mode – Auto sleep mode helps preserve battery life over long periods of no load operation. Introduction The Dimensions 12LP10 Series Inverter from Sensata Technologies provides pure sine wave power in a compact chassis to help power all of your sensitive electronic loads. Model Numbers
- 12LP10
- 12LP10H
- 12LP10HR
- 12LP10R Pure Sine Wave
Copyright © 2019 Sensata Technologies, Inc. Page 2 www.sensata.com 12LP10 12LP10H NO GFCI, HARDWIRE ONLY 12LP10HR NO GFCI, HARDWIRE ONLY, LOCAL ON/OFF SWITCH DISABLED 12LP10R LOCAL ON/OFF SWITCH DISABLED INVERTER SPECIFICATIONS Input battery voltage range 10.5 - 16 VDC 10.5 - 16 VDC 10.5 - 16 VDC 10.5 - 16 VDC Surge voltage Up to 24 VDC Up to 24 VDC Up to 24 VDC Up to 24 VDC Nominal AC output voltage 120 VAC ± 5% 120 VAC ± 5% 120 VAC ± 5% 120 VAC ± 5% Output frequency and accuracy 60 Hz ± 0.5% 60 Hz ± 0.5% 60 Hz ± 0.5% 60 Hz ± 0.5% Total Harmonic Distortion (THD) < 5% < 5% < 5% < 5% Continuous power output (real watts) 1000 1000 1000 1000 Output current 8.3 AAC 8.3 AAC 8.3 AAC 8.3 AAC Input current Up to 110 ADC Up to 110 ADC Up to 110 ADC Up to 110 ADC Peak power 2000 watts 2000 watts 2000 watts 2000 watts Peak output 23.5 AAC 23.5 AAC 23.5 AAC 23.5 AAC Motor starting rating 1/3 hp 1/3 hp 1/3 hp 1/3 hp Inverter efficiency (peak) 82% 82% 82% 82% Waveform Pure Sine Wave Pure Sine Wave Pure Sine Wave Pure Sine Wave GENERAL FEATURES Warranty Five years Listings UL/cUL 458 Power Inverter, E100666 PHYSICAL SPECIFICATIONS Weight 20 lb (9.1 kg) 20 lb (9.1 kg) 20 lb (9.1 kg) 20 lb (9.1 kg) Operating temperature -20° C to +60° C (-4° F to 140° F) SPECIFICATIONS AGENCY APPROVALS & CERTIFICATIONS
- UL/cUL 458 Power Inverter, E100666 Testing for specifications at 25° C. Specifications subject to change without notice. GENERAL NOTES
Copyright © 2019 Sensata Technologies, Inc. Page 3 Rev: 07/20/19 Part#131345 vC Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. www.sensata.com CONTACT US 651-653-7000 800-553-6418 InverterInfo@sensata.com Power Conversion www.magnum-dimensions.com