12K506

12K506 ELMA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 25

Technical content

www.elma.com05|21 1|25 SYSTEMKIT 12K CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET › Choice between VME, VME64x or cPCI application › Possibility for rear I/O mounting › EMC level: Basic (already in the basic version without additional EMC parts) › RoHS compliant › Different heights and depths available › Accessory sets for individual expansion › Customizations on request Product description MAIN FEATURES The Systemkit 12K is a high quality subrack system that high flexibility with wide functionality united. Completely made of aluminum, it already offers significant advantages in a standard version such as...PRODUCT VARIETY › Additional dimensions for special card depths › Combination of rear I/O and recessed card mounting › Horizontal and vertical divisions › Increased EMC protection with optional gaskets › Special equipment on request › Various sizes and colors › Individual interior design Executions SIZES ■ 3 to 9 U (height units) ■ 84 HP ■ Depth: 289 to 500 mm COLORS ■ Clear passivated ■ Colors on request

www.elma.com05|21 2|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Executions SPECIAL FEATURES The Systemkit 12K was tested according to the following norms: ■ Vibration EN60068-2-6 ■ Shock EN60068-2-27 ■ Dry heat EN60068-2-2 Product structure CONFIGURATION SYSTEMKIT 12K COMPILATION 4. GENERAL ACCESSORIES 3. ASSEMBLY ACCESSORIES rear I/O cards | front sub divisions | horizontal mounting kits | drive modules 1. APPLICATION RANGE cPCI, VME64x, VME 2. ASSEMBLY OPTIONS reduction set | front or recessed mounting | panel solid or perforated 6. EXTRUSIONS 5. EMC PROTECTION ■ Damp heat, cyclic EN60068-2-30 ■ Cold EN60068-2-1 ■ Salt spray test DIN50021 EMC PROTECTION Electromagnetic comptability is the ability of a system to operate in the intended environment without causing or suffering unacceptable degradation of performance due to unintentinal electromagnetic radiation or response. The EMC character- stics of a system therefore consist of an appropriate immunity from interference (noise immunity) and a limited emission of interference (noise emission). Elma’s EMC concept describes three levels of electromagnetic shielding performance (perfor- mance level). The attenuation levels will simplify the selection of sub racks for the user. Test setup: The first measurement E1 is without the enclosure. The next measurement E2 is made with the transmitting antenna installed inside the enclosure. The difference between the received signal without and with the enclosure represents the shielding effectiveness in dB. The standard configuration will provide you with a basic EMC level. If you require an advanced or superior EMC level for your system, you need to order additional EMC parts. Performance level 30 - 230 MHz 230 - 1000 MHz 1000 - 2000 MHz

1 Elma Basic level 20 dB 10 dB 0 dB

2 Elma Advanced level 40 dB 30 dB 20 dB

3 Elma Superior level 60 dB 50 dB 40 dB

www.elma.com05|21 3|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET VME (IEEE1101.10 / IEEE101.11) STANDARD CONFIGURATIONS VME (IEC60297) STANDARD CONFIGURATIONS Basic set-up CPCI (IEEE1101.10 / IEEE101.11) STANDARD CONFIGURATIONS** Height 3 U 4 U 6 U Depth 289 mm 400 mm 289 mm 400 mm 500 mm 289 mm 400 mm 500 mm Part No. 12K001 12K041 12K002 12K003 12K004 12K008 12K042 12K043 Card size 3 U 3 U 3 U 3 U 3 U 3 / 6 U 3 / 6 U 3 / 6 U Card depth 160 mm 160 mm 220 mm 160 mm 160 mm 220 mm 160 mm 220 mm 160 mm 160 mm 220 mm 160 mm 220 mm Rear I/O card depth* 80 mm - 80 mm 80 mm 80 mm 80 mm - - Max. slot 21 21 21 21 21 21 21 21 Front mounting possible possible possible possible possible possible possible possible Recessed mounting - - possible possible possible possible (3 U) possible (3 U) possible (3 U) Height reduction - - possible possible possible possible (3 U) possible (3 U) possible (3 U) Base material aluminum aluminum aluminum aluminum aluminum aluminum aluminum aluminum Surface treatment conductive conductive conductive conductive conductive conductive conductive conductive Possible EMC level advanced advanced advanced advanced advanced advanced advanced advanced Height 3 U 4 U 6 U Depth 291 mm 400 mm 291 mm 371 mm 400 mm 500 mm 291 mm 400 mm 500 mm Part No. 12K023 12K024 12K025 12K026 12K027 12K028 12K029 12K030 12K031 Card size 3 U 3 U 3 U 3 U 3 U 3 U 3 / 6 U 3 / 6 U 3 / 6 U Card depth 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm Rear I/O card depth* - - - 160 mm 160 mm 160 mm - - - Max. slot 21 21 21 21 21 21 21 21 21 Front mounting possible possible possible possible possible possible possible possible possible Recessed mounting - - possible - possible possible possible (3 U) possible (3 U) possible (3 U) Height reduction - - possible possible possible possible possible (3 U) possible (3 U) possible (3 U) Base material aluminum aluminum aluminum aluminum aluminum aluminum aluminum aluminum aluminum Surface treatment conductive conductive conductive conductive conductive conductive conductive conductive conductive Possible EMC level advanced advanced advanced advanced advanced advanced advanced advanced Height 3 U 4 U 6 U Depth 291 mm 400 mm 500 mm 291 mm 371 mm 400 mm 500 mm 291 mm 400 mm 500 mm Part No. 12K019 12K020 12K044 12K038 12K005 12K006 12K007 12K039 12K009 12K010 Card size 3 U 3 U 3 U 3 U 3 U 3 U 3 U 3 / 6 U 3 / 6 U 3 / 6 U Card depth 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm Rear I/O card depth* - - - - 160 mm 160 mm 160 mm - - - Max. slot 21 21 21 21 21 21 21 21 21 21 Front mounting possible possible possible possible possible possible possible possible possible possible Recessed mounting - - - possible - possible possible possible (3 U) possible (3 U) possible (3 U) Height reduction - - - possible possible possible possible possible (3 U) possible (3 U) possible (3 U) Base material aluminum aluminum aluminum aluminum aluminum aluminum aluminum aluminum aluminum aluminum Surface treatment conductive conductive conductive conductive conductive conductive conductive conductive conductive conductive Possible EMC level advanced advanced advanced advanced advanced advanced advanced advanced advanced advanced *Rear I/O possible when front cards 160 mm only. No recessed mounting possible in combination with rear I/O. **Other configurations are available as customizations.

www.elma.com05|21 4|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Basic set-up CPCI (IEEE1101.10 / IEEE101.11) STANDARD CONFIGURATIONS** Height 7 U 9 U Depth 289 mm 400 mm 500 mm 400 mm 500 mm Part No. 12K011 12K012 12K013 12K021 12K022 Card size 3 / 6 U 3 / 6 U 3 / 6 U 3 / 6 U 3 / 6 U Card depth 160 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm Rear I/O card depth* 80 mm 80 mm 80 mm 80 mm 80 mm Max. slot 21 21 21 21 21 Front mounting possible possible possible possible possible Recessed mounting possible possible possible possible possible Height reduction possible possible possible possible possible Base material aluminum aluminum aluminum aluminum aluminum Surface treatment conductive conductive conductive conductive conductive Possible EMC level advanced advanced advanced advanced advanced Height 7 U 9 U Depth 291 mm 371 mm 500 mm 500 mm 400 mm 500 mm Part No. 12K032 12K033 12K034 12K035 12K036 12K037 Card size 3 / 6 U 3 / 6 U 3 / 6 U 3 / 6 U 3 / 6 U 3 / 6 U Card depth 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm Rear I/O card depth* - 160 mm 160 mm 160 mm 160 mm 160 mm Max. slot 21 21 21 21 21 21 Front mounting possible possible possible possible possible possible Recessed mounting possible - possible possible possible possible Height reduction possible possible possible possible possible possible Base material aluminum aluminum aluminum aluminum aluminum aluminum Surface treatment conductive conductive conductive conductive conductive conductive Possible EMC level advanced advanced advanced advanced advanced advanced Height 7 U 9 U Depth 291 mm 371 mm 500 mm 500 mm 400 mm 500 mm Part No. 12K040 12K014 12K015 12K016 12K017 12K018 Card size 3 / 6 U 3 / 6 U 3 / 6 U 3 / 6 U 3 / 6 U 3 / 6 U Card depth 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm 160 mm 220 mm Rear I/O card depth* - 160 mm 160 mm 160 mm 160 mm 160 mm Max. slot 21 21 21 21 21 21 Front mounting possible possible possible possible possible possible Recessed mounting possible - possible possible possible possible Height reduction possible possible possible possible possible possible Base material aluminum aluminum aluminum aluminum aluminum aluminum Surface treatment conductive conductive conductive conductive conductive conductive Possible EMC level advanced advanced advanced advanced advanced advanced *Rear I/O possible when front cards 160 mm only. No recessed mounting possible in combination with rear I/O. Other configurations are available as customizations. VME (IEEE1101.10 / IEEE101.11) STANDARD CONFIGURATIONS VME (IEC60297) STANDARD CONFIGURATIONS**

www.elma.com05|21 5|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET VME application (IEC60297) VME64x application (IEEE1 101.10 | IEEE1 101.1 1) Application CPCI | VME64X | VME 19'' BASIC SET Scope of delivery: ■ 2 side walls ■ 4 front extrusions ■ 4 tapped strips M2.5 ■ 1 set assembly material (16 cylinder head screw torx T20 (M4 x 10)) cPCI application (IEEE1 101.10 | IEEE1 101.1 1): INTERNAL EXTRUSIONS INTERNAL EXTRUSIONS FOR INSULATAD BACKPLANE MOUNTING Scope of delivery: ■ 2 internal extrusions ■ 2 tapped strips M2.5 ■ 2 insulating strips ■ Assembly material (8 cylinder head screw torx T20 (M4 x 10)) Depth 3 U 132.5 mm 4 U 177.0 mm 6 U 265.9 mm 7 U 310.3 mm 9 U 399.2 mm 289 mm 12K001 12K002 12K008 12K011 - 400 mm 12K041 12K003 12K042 - 12K021 500 mm - 12K004 12K043 - - Depth 3 U 132.5 mm 4 U 177.0 mm 6 U 265.9 mm 7 U 310.3 mm 9 U 399.2 mm 291 mm 12K019 12K038 12K039 12K040 - 371 mm - 12K005 - - - 400 mm 12K020 12K006 12K009 12K015 12K017 500 mm 12K044 12K007 12K010 12K016 12K018 Depth 3 U 132.5 mm 4 U 177.0 mm 6 U 265.9 mm 7 U 310.3 mm 9 U 399.2 mm 291 mm 12K023 12K025 12K029 12K032 - 400 mm 12K024 12K027 12K030 12K034 12K036 500 mm - - 12K031 12K035 12K037 Description Part No. Insulated mounting of backplane 12K506

www.elma.com05|21 6|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Application INTERNAL EXTRUSIONS INTERNAL EXTRUSIONS FOR CONDUCTIVE BACKPLANE ASSEMBLY Scope of delivery: ■ 2 internal extrusions ■ 2 tapped strips M2.5 ■ Assembly material (8 cylinder head screws torx T20 (M4 x 10)) DOUBLE EXTRUSIONS FOR INSULATED BACKPLANE MOUNTING ■ For 6 U cards only ■ Stiffener for VME monolithic backplanes ■ Fixing for J1 and J2 backplanes Scope of delivery: ■ 1 double extrusion ■ 2 tapped strips ■ 2 insulating strips ■ Assembly material (8 x torx T20 (M4 x 6) | 2 x torx T20 (M3 x 10) | 2 x adapter) DOUBLE EXTRUSIONS FOR CONDUCTIVE BACKPLANE ASSEMBLY ■ For 6 U cards only ■ Stiffener for VME monolithic backplanes ■ Fixing for J1 and J2 backplanes Scope of delivery: ■ 1 double extrusion ■ 2 tapped strips ■ Assembly material (8 x torx T20 (M4 x 6) | 2 x torx T20 (M3 x 10) | 2 x adapter) Description Part No. Non-insulated mounting of backplane 12K507 Description Part No. 1 set double extrusion for insulated backplane mounting 12K508 Description Part No. 1 set double extrusion for non-insulated backplane mounting 12K509

www.elma.com05|21 7|25 A M4 x 8 4.5 11 4.5 M4 x 8 A M4 x 8 3 - 6 U 4141 12.2 12.2 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Range of application HEIGHT EXTRUSIONS FOR 19'' VERSION ■ Not suitable for telescopic rail mounting ■ Handles and EMC gaskets see below Scope of delivery: ■ 2 19'' height extrusions (front) ■ 2 height extrusions (rear) ALUMINUM HANDLE 9 MM (ANODIZED) Socpe of delivery: ■ 1 handle for height extrusions ■ Assembly material ■ Per subrack 2 handles have to be ordered DIE CAST ALUMINUM HANDLE (WET PAINTED RAL 9006) Scope of delivery: ■ 1 handle for height extrusions ■ Assembly material ■ Per subrack 2 handles have to be ordered Height Part No.

3 U 4 U 6 U 7 U 9 U

12K200 12K201 12K202 12K203 12K204 Sizes 3 U 4 U 6 U 7 U 9 U Part No. 60-573 60-574 60-576 60-574 60-576 Sizes 3 U 4 U 6 U 7 U 9 U Part No. 60-563 60-564 60-566 60-564 60-566

www.elma.com05|21 8|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Height Part No.

3 U 12K400

6 U 12K402

TELESCOPIC RAILS SET (LOAD CAPACITY UP TO 60 KG / PAIR) Scope of delivery: ■ 2 telescopic rails ■ Mounting bracket and assembly material for mounting into cabinet and on module Max. withdraw Usable depth Part No. min. max. 511.2 mm 463 mm 681.8 mm 65-051 596.4 mm 564.6 mm 783.4 mm 65-052 719.6 mm 666.2 mm 885 mm 65-053 Range of application HEIGHT EXTRUSIONS FOR 19'' VERSION (FROM TELESCOPIC RAILS) HEIGHT EXTRUSIONS FOR ASSEMBLY OF TELESCOPIC RAILS Scope of delivery: ■ 2 19'' height extrusions (front) ■ 2 height extrusions (rear) ■ 2 die cast aluminum handles ■ Assembly material (4 countersunk screw torx T20 (M4 x 10)) Assembly options REDUCTION SET REDUCTION KIT 1/3 U + 2/3 U FOR FRONT MOUNTING | SOLID ■ Material: Aluminum 1.5 mm, conductive, depth independent (to be used in conjunction with the bottom / top panel) ■ For 160 mm card depth, 4 U enclosure (Eurocards) |

7 U enclosure (double Eurocards)

Scope of delivery: ■ 1 adapter top (1/3 U), 1 adapter bottom (2/3 U) incl. fan plate ■ 1 set assembly material (6 x torx T10 (M3 x 8) | 4 x torx T20 (M4 x 10)) Other heights on request Rugged telescopic rails, load capacity up to 90 kg / pair on request Description Part No. Reduction set solid incl. fan panel 12K732

www.elma.com05|21 9|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Assembly options REDUCTION SET ADDITIONAL FAN PLATE Scope delivery for additional fan plate (for easy access and maintenance of the fans): ■ 1 fan plate ■ 8 milled edge screw torx T10 (M3 x 5) REDUCTION KIT 1/3 U + 2/3 U FOR 60 MM RECESSED MOUNTING ■ Material: Aluminum 1.5 mm, conductive, depth independent (to be used in conjunction with the bottom / top panel) ■ For 60 mm recessed mounting, 160 mm card depth, for 4 U enclosure (Eurocards) | for 7 U enclosure (double Eurocards) Scope of delivery: ■ 1 adapter top (1/3 U), 1 adapter bottom (2/3 U) incl. fan plate ■ 1 set assembly material (6 x torx T10 (M3 x 8) | 4 x torx T20 (M4 x 10)) REDUCTION KIT 1/3 U + 2/3 U FOR FRONT MOUNTING ■ Material: Aluminum 1.5 mm, conductive, depth independent (to be used in conjunction with the bottom / top panel) ■ For 4 U enclosure (Eurocards) | for 7 U enclosure (double Eurocards) Scope of delivery: ■ 1 adapter (2/3 U) ■ No assembly material needed ■ Per subrack 2 pieces (4 pieces with rear I/O) have to be used Description Part No. Fan plate incl. assembly material 12K737 Description Part No. Fan plate incl. assembly material 12K737 Part No. solid 12K710 Part No. perforated* Part No. solid 12K500 12K501 *only bottom part (2/3 U) is perforated perforated version on request Scope of delivery for additional fan plate (for easy access and maintenance of the fans): ■ 1 fan plate ■ 8 milled edge screw torx T10 (M3 x 5)

www.elma.com05|21 10|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Assembly options REDUCTION SET REDUCTION KIT 1/2 U + 1/2 U FOR 60 MM RECESSED MOUNTING ■ Material: Aluminum 1.5 mm, conductive, depth independant (to be used in conjunction with the bottom / top panel) ■ For 4 U enclosure (Eurocards) | for 7 U enclosure (double Eurocards) Scope of delivery: ■ 1 adapter bottom (1/2 U) ■ 1 set assembly material (2 cylinder head screw torx T20 (M4 x 10)) ■ Per subrack 2 pieces have to be used ■ Note: The depth independent ½ U adapter are to be used in conjunction with the bottom / top panel Part No. solid 12K730 perforated version on request BOTTOM / TOP PANEL SOLID ■ Material: Aluminum 1.5 mm, conductive ■ EMC level: Basic Scope of delivery: ■ 1 bottom / top panel solid ■ 1 set assembly material (18 cylinder head screw torx T10 (M3 x 6)) Depth Part No. 289 mm 12K 746 291 mm 12K720 371 mm 12K722 400 mm 12K723 500 mm 12K724 Depth Part No. 289 mm 12K 749 291 mm 12K725 400 mm 12K728 500 mm 12K729 PERFORATED ■ Material: Aluminum 1.5 mm, conductive ■ EMC level: Basic Scope of delivery: ■ 1 bottom / top perforated ■ 1 set assembly material (18 cylinder head screw torx T10 (M3 x 6))

www.elma.com05|21 11|25 17.85 20.85 15.850 3 29.3 35.3 für M4 □3.2/5.08 Montageseite Kartenführung CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET FRONT SUB DIVISION EMC FRONT SUB DIVISION HORIZONTAL FOR 84 HP SUBRACKS ■ EMC level: Advanced ■ Fastening: Card guides be applied on upper and lower card cage side Scope of delivery: ■ 2 front extrusion ■ 1 EMC gasket ■ 3 spacers ■ 1 set assembly material (8 cylinder head screw torx T20 (M4 x 10) | 6 cylinder head screw torx T10 (M3 x 6)) ■ 2 tapped strips M2.5 EMC FRONT SUB DIVISION HORIZONTAL IEC FOR CARD GUIDES ■ For sub division of front and rear ■ Card guide can be mounted on one side ■ EMC level: Superior ■ Only one special extrusion needed | easy and quick assembly | delivered in set ■ Usable width: 84 HP ■ Other sizes on request Scope of delivery: ■ 1 front double extrusion special, clear passivated ■ 2 tapped strips M2.5 ■ 4 cylinder head screw torx T20 (M4 x 10) Description Part No. EMC front sub division horizontal IEC for card guides 63K837-24 Part No. VME Part No. cPCI / VME64x 63K837-84 63K837-85 Card guide mounting side Assembly accessories REAR I/O CARD MOUNTING ■ For 80 mm card depth (cPCI) | 160 mm card depth (VME and VME64x) Scope of delivery: ■ 2 internal extrusion for rear I/O card mounting ■ Assembly material (4 cylinder head screw torx T20 (M4 x 10)) Description Part No. Internal extrusion for rear I/O card mounting 12K504 Soacer 66-388-10 Gasket Front extrusion 66-111/66-677 Card guide For M4

www.elma.com05|21 12|25 15.85 17.85 20.85 14.8 20.8 für M4 17.85 20.85 15.850 3 29.3 39.3 für M4 □3.2/5.08 Montageseite Kartenführung CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Assembly accessories FRONT SUB DIVISION EMC FRONT SUB DIVISION HORIZONTAL IEC ■ For sub division of front or rear ■ Without possibility of mounting card guides ■ EMC level: Superior ■ Only one special extrusion needed | easy and quick assembly | delivered in set ■ Usable width: 84 HP ■ Other sizes on request Scope of delivery: ■ 1 front double extrusion IEC special, clear passivated ■ 2 tapped strips M2.5 ■ 4 cylinder head screw torx T20 (M4 x 10) Description Part No. EMC front sub division horizontal IEC 63K837-22 FRONT SUB DIVISION EMC FRONT SUB DIVISION HORIZONTAL IEEE FOR CARD GUIDES ■ EMC level: Superior ■ Only one special extrusion needed ■ Card guides can be mounted on one side ■ Easy and quick assembly ■ Usable width: 84 HP ■ Other sizes on request Scope of delivery: ■ 1 front double extrusion IEEE special, clear passivated ■ 2 tapped strips M2.5 ■ 4 cylinder head screw torx T20 (M4 x 10) Description Part No. EMC front sub division horizontal IEEE 63K837-23 Description Part No. 1 set with 2 HF springs 84 HP 7739-14-4 HF SPRING ■ Stainless steel ■ Snapped-in on the extrusion Scope of delivery: ■ 2 HF spring 84 HP For M4 Card Guide Mounting side For M4

www.elma.com05|21 13|25 Doppelseitiges Klebeband 0.8 4.1 0.08 2DoppelseitigesKlebeband 0.8 4.1 0.082 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET FRONT SUB DIVISION FRONT SUB DIVISION VERTICAL FOR 6 U SYSTEM | 6 U ASSEMBLY ■ For the partial sub division of 6 U in 2 x 3 U Scope of delivery: ■ 1 divider extrusion front ■ 1 divider extrusion rear ■ 2 front extrusions ■ 2 internal extrusions ■ Assembly material (16 cylinder head screw torx T20 (M4 x 10) | 4 cylinder head screw torx T10 (M3 x 12)) Assembly accessories FRONT SUB DIVISION EMC CONTACT STRIPS ■ BeCu galvanized ■ For front panels, fixing on extrusion ■ Self-adhesive Scope of delivery: ■ 2 EMC contact strips Nominal width

6 U (c)

2 x 3 U (a) Part No. IEC60297 Part No. IEEE1101.10

50 HP 32 HP 12K959-3

40 HP 42 HP 12K949-2

Scope of delivery Description Part No. 1 piece tapped strip M2.5, 32 HP = 162.56 mm 61-463 1 piece tapped strip M2.5, 42 HP = 213.36 mm 61-464 Tapped strips for front extrusion: HP Length Part No. mm inch 84 424.2 16.7 63-836-70 Double sided tape U HP

www.elma.com05|21 14|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Description Part No. Screw torx T8 (M2.5 x 11.3) with plastic screw retainer 63K159 Rounded head screw recessed M2.5 x 11.3 with plastic screw retainer 63-159 Height | Nominal width Part No. Part No. for cover plate top Part No. for cover plate bottom

3 U | 20 HP 14K971-60 21N602-90 21N602-90

4 U | 28 HP 14K981-60 21N602-90 21N603-90

6 U | 48 HP 14K991-60 21N606-90 21N607-90

Front panel screws: ■ Set with 10 screws, with screw retainer Assembly accessories HORIZONTAL INSTALLATION KITS HORIZONTAL INSTALLATION KIT FOR DOUBLE EUROCARDS ■ Suitable for 6 U and VME ■ Card depth independent ■ Mounting width: 52 HP Scope of delivery: ■ 1 set incl. assembly material Double Eurocards = 52 HP HORIZONTAL INSTALLATION KITS HORIZONTAL EMC INSTALLATION KIT FOR DOUBLE EUROCARDS ■ Suitable for 6 U ■ Card depth 160 mm ■ Backplane mounting ■ The fan module must be installed on the right side (fan not included in the scope of delivery) Scope of delivery: ■ Card mounting kit incl. fan tray and connector (incl. assembly material) U Nominal height Part No. cPCI Part No. VME64x 4 28 HP 14K987-60 14K988-60 *Space is necessary for the air flow. Assemble blind panel. Cover plates General accessories can be found in the brochure ''General accessories'' or on request.

8 HP* 60 HP

www.elma.com05|21 15|25 Width Thickness Neoprene Aluminium~3 Tape CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET U Nominal height Part No. cPCI Part No. VME64x 4 28 HP 14K988-10 14K990-10 Assembly accessories HORIZONTAL INSTALLATION KITS HORIZONTAL EMC INSTALLATION KIT FOR REAR I/O EUROCARDS ■ Suitable for rear I/O double Eurocards (6 U) ■ Card depth 80 mm (cPCI) | 160 mm (VME and VME64x) ■ Backplane mounting Scope of delivery: ■ 1 set incl. assembly material and cover on side EMC protection EMC SET FOR BOTTOM / TOP PANEL DEPTH | EMC LEVEL: ADVANCED Scope of delivery: ■ 4 EMC gasket for depth Depth Part No. 289 / 291 mm 63K836-15 371 mm 63K836-16 400 mm 63K836-04 500 mm 63K836-05 Description Part No. 4 gaskets, 4 x 7 mm x 84 HP, when using height reduction kits at front and rear 63K836-01 4 gaskets, 6 x 7 mm x 84 HP, use without height reduction kits (only extrusions) 63K836-02 2 gaskets, 6 x 7 mm x 84 HP | 2 gaskets 4 x 7 mm x 84 HP, when using only one height reduction kit at front or rear 63K836-03 WIDTH | EMC LEVEL: ADVANCED Scope of delivery: ■ 4 EMC gasket for width Top view 371 for VME / VME64 289 for cPCI Width Tape Aluminum Neoprene Thikness

www.elma.com05|21 16|25 Dichtung nach hinten CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET EMC protection EXTRUSION FOR RECESSED EMC MOUNTING | EMC LEVEL: BASIC ■ Interior fitting: Extrusion bolts with side walls ■ Application: Recessed installation of front panel ■ Can be used in conjunction with EMC sets and gasket to achieve advanced EMC level Scope of delivery: ■ 2 EMC extrusions ■ 8 cylinder head screw torx T8 (M2.5 x 4) EMC GASKET FOR HEIGHT EXTRUSIONS | FRONT PANEL | EMC LEVEL: ADVANCED ■ Front or recessed mounting ■ 1 front panel per slots ■ Application: Height extrusions front / rear, front panel ■ Gasket is installed onto the extrusion ■ When using an EMC gasket in connection with a card, the gasket must be selected in the card depth ■ When a height reduction is used, choose height between reductions ■ Can be used in conjunction with EMC sets to achieve advanced EMC level EMC CONTACT STRIPS | EMC LEVEL: ADVANCED ■ For front panels, fixing on extrusion ■ Self-adhesive Scope of delivery: ■ 2 contact strips Gasket towards rear System height Extrusion height mm Part No.

4 U ~3 U 140 63K608

7 U ~6 U 280 63K609

3 101.6 81-062-03 4 146.05 81-062-04 6 234.95 81-062-06 7 279.4 81-062-07 9 368.3 81-062-09 HP Length Part No. 42 212.1 mm = 8.48'' 63-836-67 84 424.2 mm = 16.97'' 63-836-70

www.elma.com05|21 17|25 207 317 419 419 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Accessories MOUNTING CHASSIS REINFORCED: ■ Aluminum 2 mm Scope of delivery: ■ Mounting chassis 85 HP (431.8 mm) ■ Assembly material (4 earthing nuts M4, 4 cylinder head screw torx T20 (M4 x 6)) MOUNTING CHASSIS FULL DEPTH ■ Mounting non-standard modules and components ■ Mounting chassis is fixed directly on the side panel ■ Aluminum 2 mm, raw Scope of delivery: ■ 1 mounting chassis Description Part No. Depth: 140 mm 14K836-50 Description Part No. Assembly material for mounting chassis with torx screw 63K861 Assembly material: ■ 4 cylinder head screw torx T20 (M4 x 6) and 4 earthing nut M4 ■ Mounting chassis depth 207 mm can be mounted with 4 screws (317 mm with 8 screws, 419 mm with 10 screws) Subrack depth Mounting chassis depth Part No. mm inch mm inch 289 / 291 mm 11.37 / 11.45 207 mm 8.15 14K850 400 mm 15.74 317 mm 12.48 14K851 500 mm 19.68 419 mm 16.49 14K852

www.elma.com05|21 18|25 84 HP 63 HP 42 HP 22,7 127127127 32,85 127127 43 127 TE TE TE84 HP 63 HP 42 HP 22,7 127127127 32,85 127127 43 127 TE TE TE84 HP 63 HP 42 HP 22,7 127127127 32,85 127127 43 127 TE TE TE CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Accessories FRONT PANELS EMC FLAT FRONT PANELS ■ Aluminum 2.5 mm (conductive) ■ Closes the front or rear of the subrack with very high shielding effectiveness ■ Contact between the flat front panel and the enclosure is made via EMC gaskets FLAT FRONT PANEL EMC LEVEL ADVANCED Scope of delivery: ■ 1 EMC flat front panel ■ 1 contact angle incl. screws (4 + 6 U version only) ■ 1 EMC gasket for contact angle (4 + 6 U version only) FLAT FRONT PANEL EMC LEVEL SUPERIOR Scope of delivery: ■ EMC flat front panel ■ Contact angle, incl. screws ■ EMC gasket for contact angle and front extrusion / front panel Front panel screws: ■ Front panel width 42 HP = 4 screws ■ Front panel width 63 HP = 6 screws ■ Front panel width 84 HP = 8 screws Front panel screws: ■ Front panel width 42 HP = 4 screws ■ Front panel width 63 HP = 6 screws ■ Front panel width 84 HP = 8 screws Width Part No. 1 U Part No. 2 U Part No. 3 U Part No. 4 U Part No. 6 U

42 HP 21C342

63 HP 21C263 21C363 21C463

84 HP 21C184 21C284 21C384 21C484 21C684

Width Part No. 2 U Part No. 3 U Part No. 4 U Part No. 6 U

84 HP 21D284 21D384 21D484 21D684

Description Part No. (10 pieces) Screw torx T8 (M2.5 x 11.3) with press-fit bush 63K480 Screw recessed M2.5 x 11.3 with press-fit bush 63-444 Screw cross recessed M2.5 x 12.7 with press-fit bush 63-480 Description Part No. (10 pieces) Screw torx T8 (M2.5 x 11.3) with press-fit bush 63K480 Screw recessed M2.5 x 11.3 with press-fit bush 63-444 Screw cross recessed M2.5 x 12.7 with press-fit bush 63-480 Contact angle Contact angle with conductive tape EMC gasket (front extrusion / front panel) EMC gasket partial (side / front panel) EMC gasket full height (side / front panel) 1 - 3 U 2 - 6 U 4 - 6 U HP HP HP

www.elma.com05|21 19|25 426.4 426.4 39.6584.1 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Accessories FRONT PANEL PERFORATED EMC FRONT PANEL ■ Front anodized | rear conductive ■ EMC level: Advanced ■ Width: 84 HP Scope of delivery: ■ 1 perforated flat front panel Front panel screws: Front panel screws: ■ Front panel width: Up to 9 HP = 2 screws | ≥ 10 HP = 4 screws EMC FILLER PANEL WITHOUT EMC GASKET ■ Front panel standard, solid ■ Front clear anodized | rear conductive ■ EMC level: Basic Scope of delivery: ■ 1 front panel incl. press-fit bushes M2.5 (pressed-in) n x HP (5.08) Cut B-B Description Part No. (10 pieces) Screw torx T8 (M2.5 x 11.3) with press-fit bush 63K480 Screw recessed M2.5 x 11.3 with press-fit bush 63-444 Screw cross recessed M2.5 x 12.7 with press-fit bush 63-480 Height Air passage Part No. without switch opening 1 U 39.65 mm 1.56'' 4’100 mm2 21C184-01 2 U 84.1 mm 3.31'' 12’300 / 11’700 mm2 21C284-01 Description Part No. Screw torx T8 (M2.5 x 11.3) 5443-08 Round head screw, cross recessed M2.5 x 12.7 61-287 Width Part No. 3 U Part No. 4 U Part No. 6 U

4 HP 21B304

10 HP 21B310

12 HP 21B312

16 HP 21B316 21B416

21 HP 21B321 21B421

42 HP 21B342 21B442 21B642

63 HP 21B363 21B463

84 HP 21B384 21B484 21B684

1 U2 U

www.elma.com05|21 20|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET FLAT FRONT PANELS ■ For subracks and enclosures, solid ■ Aluminum 2.5 mm, clear anodized (non-conductive) Scope of delivery: ■ 1 flat front panel Accessories FRONT PANEL SPACER FOR EMC FRONT PANEL FLAT Scope of delivery: ■ 1 spacer incl. gasket ■ 2 sheet metal screw torx T10 (2.9 x 6.5) Height Part No.

3 U 81K023

4 U 81K024

7 U 81K027

Width B Part No. mm inch 1 U 39.8 mm ca. 1 U* 42.15 mm 2 U 84.2 mm 3 U 128.7 mm 4 U 173.1 mm 6 U 262.0 mm 7 U 306.5 mm 9 U 395.4 mm 2 HP 1 10 0.39 – – – 21N302 21N602 – 3 HP 15.2 0.59 – – – 21N303 21N403 21N603 – – 4 HP 20.1 0.79 – – – 21N304 21N404 21N604 – 21N904 5 HP 25.2 0.99 – – – 21N305 21N405 21N605 – – 6 HP 30.3 1.19 – – – 21N306 21N406 21N606 – – 7 HP 35.3 1.38 – – – 21N307 21N407 21N607 – – 8 HP 40.4 1.59 – – – 21N308 21N408 21N608 – – 10 HP 50.6 1.99 – – – 21N310 21N410 21N610 – – 11 HP 55.7 2.19 – – – 21N311 – – – – 12 HP 60.7 2.38 – – – 21N312 21N412 21N612 – – 14 HP 70.9 2.79 – – – 21N314 21N414 21N614 – – 16 HP 81.1 3.19 – – – 21N316 21N416 21N616 – – 20 HP 101.4 3.59 – – – 21N320 21N420 21N620 – – 21 HP 106.5 4.19 – – – 21N321 21N621 – – 28 HP 142 5.59 – – – 21N328 – 21N628 – – 32 HP 162.3 6.38 – – – 21N332 21N432 – – – 42 HP 213.1 8.38 – – 21N242 21N342 21N442 21N642 – – 52 HP 263.9 10.38 – – – 21N352 21N452 21N652 – – 63 HP 319.8 12.59 – – 21N263 21N363 21N463 21N663 – – 81 HP 411.3 16.19 – – 21N281 21N381 21N481 – – 84 HP 426.5 16.79 21N184 21N084* 21N284 21N384 21N484 21N684 21N784 21N984 Description Part No. (10 pieces) Screw torx T8 (M2.5 x 11.3) with plastic screw retainer 63K480 Rounded head screw recessed M2.5 x 11.3 with plastic screw retainer 63-480 Front panel screws: ■ Set of 10 screws with screw retainer *Coverplates for 1 U fan opening 1 2 HP subdivision profile (no front panel)

www.elma.com05|21 21|25 6.4 0 3 11 18 29.3 35.3 3.2/5.08 Montageseite Kartenführung 0für M4 0 3 11 18 29.3 39.3Montageseite Kartenführung CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Accessories TELESOPIC RAILS ■ Suitable for all heights ■ Set: Load capacity up to 60 kg / pair Scope of delivery: ■ 2 telescopic rails ■ Mounting bracket ■ Assembly material for mounting into cabinet and on module Max. withdraw Usable depth Part No. min. max. 511.2 mm 463 mm 681.8 mm 65-051 596.4 mm 564.6 mm 783.4 mm 65-052 719.6 mm 666.2 mm 885.0 mm 65-053 Rugged telescopic rails (load capacity up to 90 kg / pair) on request Extrusions FRONT EXTRUSIONS VME ■ Systemkit 12K front ■ Accept 2 x 6 mm tapped strips Scope of delivery: ■ 1 front extrusion without assembly material CPCI | VME64X ■ Front division profile according to IEEE standard ■ Accept 2 x 6 mm tapped strips Scope of delivery: ■ 1 front extrusion without assembly material Length Holes n x C Part No. clear passivatedHP mm inch 84 431.8 17 4 x 89.05 6 6 -111-153 Length Part No. clear passivatedHP mm inch 84 431.8 17 66-677-33 Card guide mounting side Card guide mounting side Length Length Length

www.elma.com05|21 22|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Extrusions INTERNAL EXTRUSIONS 66-193 FOR INSULATED BACKPLANE MOUNTING ■ For mounting backplanes in subracks ■ Accept 1.8 x 5 mm tapped strips Scope of delivery: ■ 1 internal extrusion without assembly material 66-194 FOR CONDUCTIVE BACKPLANE MOUNTING ■ For mounting backplanes without an insulating strip ■ Accept 1.8 x 5 mm tapped strips Scope of delivery: ■ 1 internal extrusion without assembly material Length Part No. clear passivatedHP mm inch 84 431.8 17 66-193-23 Length Part No. clear passivatedHP mm inch 84 431.8 17 66-194-23 Card guide mounting side Card guide Mounting side 66-138 FOR CARD GUIDES ■ For mounting card guides from rear I/O ■ Tapped strip not required Scope of delivery: ■ 1 internal extrusion without assembly material DOUBLE EXTRUSION 66-192 FOR INSULATED BACKPLANE MOUNTING ■ For mounting backplanes, matches to 66-193, 66-288 ■ For use with insulating strips ■ Accept 2 x 6 mm tapped strips Scope of delivery: ■ 1 extrusion without assembly material Length Part No. clear passivatedHP mm inch 84 431.8 17 66-138-23 Length Part No. clear passivatedHP mm inch 84 426.7 16.79 66-192-23 Card guide Assembly material with adapter: 63-175 (63K175 with torx) Length Length Length

www.elma.com05|21 23|25 CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Length Part No. clear passivatedHP mm inch 84 426.7 16.77 66-195-23 Assembly material with adapter: 63-175 (63K175 with torx) INTERNAL EXTRUSIONS EDGE CONNECTOR EXTRUSION 66-147 ■ For use with extrusions for backplanes 66-193 Scope of delivery: ■ 1 edge connector extrusion without assembly material Extrusions INTERNAL EXTRUSIONS DOUBLE EXTRUSION 66-195 WITHOUT USE OF THE INSULATING STRIPS ■ For mounting backplanes without insulating strips ■ Matches to 66-194, 66-289, 66-290 ■ Accept 2 x 6 mm tapped strips Scope of delivery: ■ 1 extrusion without assembly material Length Part No. HP mm inch clear passivated* raw 8 40.6 1.59 66-147-40 18 91.4 3.59 66-147-41 28 142.2 5.6 66-147-42 42 213.4 8.4 66-147-63 63 320 12.6 66-147-65 81 411.5 16.2 66-147-22 84 426.7 16.8 66-147-52 135 53.14 66-147-19 Assembly material: Description Part No. Assembly material M2.5 (for 2 supplementary extrusions) 63-214 *conductive for EMC protection

www.elma.com05|21 24|25 2.144.39 6.4927.65 0 3 10.03 Befestigungsloch für Griff CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Length Part No. HP mm inch 42 216.44 8.52 66-901-20 63 323.12 12.72 66-901-21 81 414.56 16.32 66-901-22 84 429.8 16.92 66-901-23 Description Part No. Cross recessed cylinder head earthing screw M2.5 x 12 5325-12 Extrusions INTERNAL EXTRUSIONS INSULATING STRIPS 66-901 ■ Plastic gray ■ In use with extrusions 66-1 12, 66-192, 66-193, 66-288 Scope of delivery: ■ 1 insulating strip without assembly material HEIGHT EXTRUSIONS 19'' HEIGHT EXTRUSIONS 66-275 ■ For standard side wall 2 mm ■ Shape to direct mounting of the EMC gasket 81-062-XX Scope of delivery: ■ 1 height extrusions without assembly material Length Part No. (clear passivated) U mm inch with fixing hole without fixing hole 3 132.5 5.2 66-275-23 66-275-33 4 177 6.96 66-275-24 66-275-34 6 265.9 10.46 66-275-26 66-275-36 7 310.3 12.21 66-275-27 66-275-37 9 399.2 15.71 66-275-39 Fixing hole for handle Assembly material: Screw M2.5 x 12 Insulation strip Internal extrusion Backplane Tapped strip

www.elma.com 25|2505|21 0 5,6 10,03 8.54 6.49 4.39 2.14 0 ©Copyright 2018 by Elma Electronic AG, CH-8620 Wetzikon. Subject to technical modifications, all data supplied without liability. CHASSIS AND SUBRACKS SYSTEMKIT 12K DATASHEET Please contact our sales team for more details. China: +86 21 5866 5908 France: +33 388 56 72 50 Germany: +49 7231 97 34 0 Israel: +972 3 930 50 25 Singapore: +65 6479 8552 Switzerland: +41 44 933 41 1 1 United Kingdom: +44 1234 838 822 United States: +1 510 656 3400 HEIGHT EXTRUSIONS 66-274 WITH CUT-OUT FOR TELESCOPIC RAILS ■ For standard side wall 2 mm ■ Cut-out for telescopic rails ■ Shape to direct mounting of the EMC gasket 81-062-XX Scope of delivery: ■ 1 height extrusions without assembly material Length Part No. (clear passivated) U mm inch left right 3 132.5 5.2 66-274-63 4 177 6.96 66 -274- 64 6 265.9 10.46 66-274-66 66 -274-76 7 310.3 12.21 66 -274- 67 66 -274-77 9 399.2 15.71 66 -274- 69 66 -274-79 Length Part No. U mm inch clear passivated 3 132.5 5.2 66-274-23 4 177 6.96 66-274-24 6 265.9 10.46 66-274-26 7 310.3 12.21 66-274-27 9 399.2 15.71 66-274-29 Extrusions HEIGHT EXTRUSIONS HEIGHT EXTRUSIONS 66-274 ■ For standard side wall 2 mm ■ Shape to direct mounting of the EMC gasket 81-062-XX Scope of delivery: ■ 1 height extrusions without assembly material