12CWQ04FNPBF IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

www.irf.com 1 Bulletin PD-21088 rev. A 05/06 Major Ratings and Characteristics IF(AV) Rectangular 12 A waveform VRRM 40 V IFSM @ tp = 5 μs sine 550 A VF @ 6 Apk, TJ = 125°C 0.48 V (per leg) TJ range - 55 to 150 °C Characteristics Values Units Description/ Features The 12CWQ04FNPbF surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, con- verters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Center tap configuration Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Case Styles D-PAK IF(AV) = 12Amp VR = 40V Anode 1 3 Anode Base Common Cathode Common Cathode

Bulletin PD-21088 rev. A 05/06 www.irf.com VFM Max. Forward Voltage Drop 0.53 V @ 6A (Per Leg) * See Fig. 1 (1) 0.68 V @ 12A

0.48 V @ 6A

0.64 V @ 12A

IRM Max. Reverse Leakage Current 3 mA T J = 25 °C (Per Leg) * See Fig. 2 (1) 40 mA T J = 125 °C VF(TO) Threshold Voltage 0.28 V TJ = TJ max. rt Forward Slope Resistance 25.58 mΩ CT Typ. Junction Capacitance (Per Leg) 405 pF V R = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 5.0 nH Measured lead to lead 5mm from package body TJ = 25 °C TJ = 125 °C Electrical Specifications (1) Pulse Width < 300μs, Duty Cycle <2% VR = rated VR Part number 12CWQ04FNPbF VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Voltage Ratings Parameters 12CWQ...Units Conditions IF(AV) Max. Average Forward(Per Leg) 6 A 50% duty cycle @ T C = 134°C, rectangular wave form Current* See Fig. 5 (Per Device) 12 IFSM Max. Peak One Cycle Non-Repetitive 550 5 μs Sine or 3μs Rect. pulse Surge Current * See Fig. 7 90 10ms Sine or 6ms Rect. pulse EAS Non-Repet. Avalan. Energy (Per Leg) 9 mJ T J = 25 °C, IAS = 1.5 Amps, L = 8 mH IAR Repetitive Avalanche Current 1.2 A Current decaying linearly to zero in 1 μsec (Per Leg) Frequency limited by T J max. VA = 1.5 x VR typical Absolute Maximum Ratings Following any rated load condition and with rated VRRM applied A Parameters 12CWQ... Units Conditions < thermal runaway condition for a diode on its own heatsink(*) dPtot 1 dTj Rth( j-a) TJ Max. Junction Temperature Range (*) -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance(Per Leg) 3.0 °C/W DC operation * See Fig. 4 Junction to Case (Per Device) 1.5 wt Approximate Weight 0.3 (0.01) g (oz.) Case Style D-Pak Similar to TO-252AA Device Marking 12CWQ04FN Thermal-Mechanical Specifications Parameters 12CWQ...Units Conditions

Bulletin PD-21088 rev. A 05/06 www.irf.com Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 0.001 0.01 0.1 100 0 5 10 15 20 25 30 35 40 R R 125°C 100°C 75°C 50°C 25°C R evers e Current - I (mA) T = 150°CJ R evers e Voltage - V (V) 100 1000 0 5 10 15 20 25 30 35 40 45 R TJunction Capacitance - C (pF ) R evers e Voltage - V (V) T = 25°CJ 0.01 0.1 thJC t , R ectangular P uls e D ur ation (S econds ) S ingle Pulse ( Th e rm a l Re sist a n c e ) T hermal Impedance Z (°C/ W) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 J DM thJC C 1 2 PDM Notes: 1. Duty factor D = t / t 2. Peak T = P x Z + T 100 Ins tantaneous F orward Current - I (A)F FM F orward Voltage Drop - V (V) T = 150°C T = 125°C T = 25°C J J J

Bulletin PD-21088 rev. A 05/06 www.irf.com Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 115 120 125 130 135 140 145 150 155 0123456789 DC Allowabl e Cas e T emperature - (°C) F( A V) se e no te ( 2) S quare wave (D = 0.50) 80% R ated V appliedR Average F orward Current - I (A) 0123456789 DC Average P ower L os s - (Watts ) F( A V ) RM S Lim it D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Average F orward Current - I (A) Square Wave Pulse Duration - t p (microsec) Non-Repetitive Surge Current - I FSM (A) 100 1000 10 100 1000 10000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge

Bulletin PD-21088 rev. A 05/06 www.irf.com Marking Information ASSEMBLED ON WW 02, 2000 LOT CODE 8024 ASSEMBLY LOT CODE LOGO INTERNATIONAL RECTIFIER X = SITE ID P = LEAD-FREE DATE CODE YEAR 0 = 2000 WEEK 02 PART NUMBERTHIS IS A 12CWQ04FN 12CWQ04FN Outline Table Modified JEDEC outline TO-252AA Dimensions in millimeters and (inches)

Bulletin PD-21088 rev. A 05/06 www.irf.com Tape & Reel Information TR FEED DIRECTION 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 12.1 (0.48) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 11.9 (0.47) 1.85 (0.07) TO-252AA Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. 13 (0.52) DIA. DIA. MAX. 22.4 (0.88) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 6.8 (0.26) 7.0 (0.28) TRR FEED DIRECTION 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 8.1 (0.32) 1.85 (0.07) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 7.9 (0.31) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 10.4 (0.41) 10.6 (0.42) DIA. TRL FEED DIRECTION 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 8.1 (0.32) 1.85 (0.07) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 7.9 (0.31) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 10.4 (0.41) 10.6 (0.42) DIA. DIA. DIA. DIA. DIA.

Bulletin PD-21088 rev. A 05/06 www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 05/06 Data and specifications subject to change without notice. This product has been designed and qualified for Consumer Level and Lead-Free. Qualification Standards can be found on IR's Web site. Ordering Information Table

12 C W Q 04 FN TRL PbF

1 - Current Rating (12A) 2 - Center Tap Configuration -

4 W = D-Pak

4 - Schottky "Q" Series 5 - Voltage Rating (04 = 40V) 6 - FN = TO-252AA 7 - y none = Tube (50 pieces) y TR = Tape & Reel y TRL = Tape & Reel (Left Oriented) y TRR = Tape & Reel (Right Oriented) 8 - y none = Standard Production y PbF = Lead-Free 7 8