2261537 COHERENT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 16

Technical content

OBIS Galaxy is offering plug-and-play capabilities in laser combining. The OBIS Galaxy is equipped with 8 FC fiber inputs, and can accept any Galaxy compatible laser using a plug-and-play integration. Each input is optimized to accept the fiber with a FC connection, and Coherent’s patented beam combining technology integrates all 8 inputs. The OBIS Galaxy provides a fiber output of the combined 8 lasers in a single-mode polarization-maintaining fiber, 2 meters in length, with a FC connector for any application. The OBIS Galaxy matches Coherent’s rigorous standards and advanced stress-testing benchmarks, offering the ease of integration, robustness, superior performance, and reliability. 8-Laser Beam Combiner OBIS Galaxy Laser Light Engines FEATURES APPLICATIONS

  • Plug-and-play 8-input, single-output beam combiner
  • Compact and low profile
  • High transmission beam combiner with typical 60% throughput per channel
  • Fiber FC/APC output connector;
  • FC/PC8 output connector available as an option
  • Optogenetics
  • Endoscopy
  • Spinning Disk and TIRF Microscopy
  • Cytometry
  • Genomics

OBIS Galaxy Laser Combiner

8 Input Fiber Connections

(nm) 405 445 or 458 488 or 473 514 532 561 594 640 Power Throughput (%) (when used with Coherent OBIS Galaxy Compatible Lasers) for 405 nm to 594 nm for 640 nm >45, Typical >60 >55, Typical >70 Maximum Power Per Channel (mW) 120 Maximum Total Output Power (mW) <500 RMS Noise (%) (20 Hz to 2 MHz) <0.5 Peak-to-Peak Noise (%) (20 Hz to 20 kHz) <2 Fiber Connector Type (Input Connectors) FC form-factor, ultra-flat contact FC/UFC with extended-life interface, anti-reflection (AR) coated tip Polarization Extinction Ratio Loss (%) <50 Long-Term Power Throughput (%) (8 hours, ±3°C) >95 Long-Term Power Throughput (%) (average) ≤2 over 1000 hours Output Fiber Fiber Connector Type (distal end) FC/APC Optional FC/PC8 8° angled, with extended-life interface 8° angled, with extended-life interface Fiber Cable Type 3 mm mono-coil Fiber Cable Length (m) (minimum) 2 Fiber Numerical Aperture (NA) (1/e²) FC/APC Optional FC/PC8 0.055 0.065 Mode Field Diameter (μm) (typical) 3 Spatial Mode TEM00 M² (Beam Quality) ≤1.1 Fiber Minimum Bend Radius 51 mm (2.0 in.) Fiber Tensile Load (maximum) 1 kg (2.2 lbs.) Notes: 1. System specifications measured at 25°C. 2. All input channels require a ±1 nm center wavelength tolerance. Required wavelength tolerances specifically: 405 nm with 404 nm to 406 nm, 445 nm with 444 nm to 446 nm, 458 nm with 457 nm to 459 nm, 488 nm with 487 nm to 489 nm, 514 nm with 513 nm to 515 nm, 532 nm with 531 nm to 533 nm, 561 nm with 560.5 nm to 562.5 nm, 594 nm with 593 nm to 595 nm, 640 nm with 641 nm to 643 nm. 3. The OBIS Galaxy Beam Combiner as tested and certified will be >60% power transmission per wavelength as measured with production tooling fixtures. 4. Fiber connector output not compatible for patchcord-to-patchcord connection. 5. M² measured with ModeMaster with 90/10 Clip Levels.

Utility and Environmental Requirements Dimensions 229 x 170 x 29 mm (9.0 x 6.7 x 1.1 in.) Weight 1.4 kg (3 lbs.) Shock Tolerance (g) (11 ms) 30 Vibration (g-RMS) (20 Hz to 2 kHz) 7.7 Ambient Temperature Operating Temperature Storage Temperature 10 to 50°C (50 to 122°F) -20 to 60°C (-4 to 140°F) Laser Safety Classification CLASS 4 Notes: 1. Non-Operational with a before/after change of <10%. 2. OBIS LS laser with Operating Temperature of 15 to 40°C (59 to 104°F). 3. OBIS Galaxy is not a laser and therefore the Laser Safety Classification is determined by the end-user and application. Refer to CDRH 21 CFR 1040 subchapter J or IEC 60825-1. Mechanical Specifications OBIS Galaxy 405 nm OUTPUT 445/458 nm 488 nm 640 nm 590/594 nm 552/561 nm 532 nm 514 nm 225 mm (8.9 in.) 222.7 mm (8.8 in.) 50 mm (2.0 in.) 169.6 mm (6.7 in.)25.4 mm (1.0 in.) 228.6 mm (9.0 in.) 29.1 mm (1.1 in.) 405 nm OUTPUT 445/458 nm 488 nm 640 nm 590/594 nm 552/561 nm 532 nm 514 nm 225 mm (8.9 in.) 222.7 mm (8.8 in.) 50 mm (2.0 in.) 169.6 mm (6.7 in.)25.4 mm (1.0 in.) 228.6 mm (9.0 in.) 29.1 mm (1.1 in.) Top View Side View 405 nm OUTPUT 445/458 nm 488 nm 640 nm 590/594 nm 552/561 nm 532 nm 514 nm 225 mm (8.9 in.) 222.7 mm (8.8 in.) 50 mm (2.0 in.) 169.6 mm (6.7 in.)25.4 mm (1.0 in.) 228.6 mm (9.0 in.) 29.1 mm (1.1 in.)

FC/APC Distal End - Output Optional FC/PC8 Angled Flat Connector Distal End – Output FC/UFC Launch End - Input Polish Direction Not Applicable to FC/UFC Connector 4 mm (0.16 in.) FC Connector Key Vertical Polarization ±2° Max. Laser Exit Aperture Polish Direction Axis ±4° Max. View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing Min. Bend Radius 50 mm (2.0 in.) FC Connector Key Narrow Key - Type R (2.0 mm +0.02/-0.03 mm Key Width) 8.0° ±0.5° 4 mm (0.16 in.) FC Connector Key Vertical Polarization ±2° Max. Laser Exit Aperture Polish Direction Axis ±4° Max. View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing Min. Bend Radius 50 mm (2.0 in.) FC Connector Key Narrow Key - Type R (2.0 mm +0.02/-0.03 mm Key Width) 8.0° ±0.5° 4 mm (0.16 in.) FC Connector Key Vertical Polarization ±2° Max. Laser Exit Aperture View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing Min. Bend Radius 50 mm (2.0 in.) FC Connector Key Narrow Key - Type R (2.0 mm +0.02/-0.03 mm Key Width) Polish Direction Not Applicable to FC/UFC Connector 4 mm (0.16 in.) FC Connector Key Vertical Polarization ±2° Max. Laser Exit Aperture Polish Direction Axis ±4° Max. View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing Min. Bend Radius 50 mm (2.0 in.) FC Connector Key Narrow Key - Type R (2.0 mm +0.02/-0.03 mm Key Width) 8.0° ±0.5° 4 mm (0.16 in.) FC Connector Key Vertical Polarization ±2° Max. Laser Exit Aperture Polish Direction Axis ±4° Max. View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing Min. Bend Radius 50 mm (2.0 in.) FC Connector Key Narrow Key - Type R (2.0 mm +0.02/-0.03 mm Key Width) 8.0° ±0.5° 4 mm (0.16 in.) FC Connector Key Vertical Polarization ±2° Max. Laser Exit Aperture View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing Min. Bend Radius 50 mm (2.0 in.) FC Connector Key Narrow Key - Type R (2.0 mm +0.02/-0.03 mm Key Width) Polish Direction Not Applicable to FC/UFC Connector 4 mm (0.16 in.) FC Connector Key Vertical Polarization ±2° Max. Laser Exit Aperture Polish Direction Axis ±4° Max. View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing Min. Bend Radius 50 mm (2.0 in.) FC Connector Key Narrow Key - Type R (2.0 mm +0.02/-0.03 mm Key Width) 8.0° ±0.5° 4 mm (0.16 in.) FC Connector Key Vertical Polarization ±2° Max. Laser Exit Aperture Polish Direction Axis ±4° Max. View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing Min. Bend Radius 50 mm (2.0 in.) FC Connector Key Narrow Key - Type R (2.0 mm +0.02/-0.03 mm Key Width) 8.0° ±0.5° 4 mm (0.16 in.) FC Connector Key Vertical Polarization ±2° Max. Laser Exit Aperture View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing Min. Bend Radius 50 mm (2.0 in.) FC Connector Key Narrow Key - Type R (2.0 mm +0.02/-0.03 mm Key Width)

© 2023 Coherent Corp. Legal notices : coherent.com/legal For more information www.coherent.com OBIS Galaxy Laser Combiner, Includes Output Fiber - Lasers sold separately Part Number 8 Input FC/UFC, Single Output FC/APC, 405 nm, 458 nm, 488 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm 2261537 8 input FC/UFC, Single Output FC/PC8, 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm 1415671 8 input FC/UFC, Single Output FC/APC, 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm 1363484 8 input FC/UFC, Single Output FC/APC, 405 nm, 445 nm, 473 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm 1399474 OBIS FP LX Lasers for OBIS Galaxy Part Number OBIS 405 nm LX 50 mW Laser: Fiber Pigtail: UFC, Galaxy, 404 nm to 406 nm 1236438 OBIS 405 nm LX 100 mW Laser: Fiber Pigtail: UFC, Galaxy, 404 nm to 406 nm 1236439 OBIS 405 nm LX 200 mW Laser: Fiber Pigtail: UFC, Galaxy, 404 nm to 406 nm 2279120 OBIS 445 nm LX 45 mW Laser: Fiber Pigtail: UFC, Galaxy, 444 nm to 446 nm 1236441 OBIS 458 nm LX 45 mW Laser: Fiber Pigtail: UFC, Galaxy, 457 nm to 459 nm 1236442 OBIS 473 nm LX 50 mW Laser: Fiber Pigtail: UFC, Galaxy, 472 nm to 474 nm 1399476 OBIS 473 nm LX 150 mW Laser: Fiber Pigtail: UFC, Galaxy, 472 nm to 474 nm 2279124 OBIS 488 nm LX 30 mW Laser: Fiber Pigtail: UFC, Galaxy, 487 nm to 489 nm 1236443 OBIS 488 nm LX 100 mW Laser: Fiber Pigtail: UFC, Galaxy, 487 nm to 489 nm 1236444 OBIS 514 nm LX 50 mW Laser: Fiber Pigtail: UFC, Galaxy, 513 nm to 515 nm 1311150 OBIS 640 nm LX 75 mW Laser: Fiber Pigtail: UFC, Galaxy, 641 nm to 643 nm 1236445 OBIS 640 nm LX 130 mW Laser: Fiber Pigtail: UFC, Galaxy, 641 nm to 643 nm 2279132 OBIS FP LS Lasers for OBIS Galaxy Part Number OBIS 488 nm LS 150 mW Laser: Fiber Pigtail: UFC, Galaxy, 487 nm to 489 nm 2279128 OBIS 532 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy, 531 nm to 533 nm 1276599 OBIS 532 nm LS 150 mW Laser: Fiber Pigtail: UFC, Galaxy, 531 nm to 533 nm 2279130 OBIS 552 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy, 551.5 nm to 553.5 nm 1275619 OBIS 561 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy, 560.5 nm to 562.5 nm 1275608 OBIS 561 nm LS 150 mW Laser: Fiber Pigtail: UFC, Galaxy, 560.5 nm to 562.5 nm 2279131 OBIS 594 nm LS 60 mW Laser: Fiber Pigtailed: UFC, Galaxy, 592 nm to 594 nm 1363485 Notes: 1. All OBIS Galaxy FP lasers same as standard OBIS FP lasers with the exception of ±1 nm center wavelength tolerances and an ultra-flat contact FC/UFC termination with extended-life interface, anti-reflection (AR) coating on fiber tip. NOTE: OBIS Galaxy Lasers include: laser and mounting hardware. The following needs to be ordered separately: OBIS LaserBox (part numbers 1228877 or 1343229), OBIS Remote (part number 1214875), or OBIS Heat Sink (part number 1193289). See OBIS LX/LS Family datasheet for details.

The flexible and modular design of the OBIS Galaxy Integrated Laser System enables users to combine up to eight predetermined wavelength OBIS lasers into one fiber. Standard configurations are offered with three, four, or five OBIS lasers preloaded. Each can be expanded up to a total of eight lasers with the purchase of additional lasers. The output of the combined lasers is delivered through a 2-meter single-mode polarization maintaining fiber with an FC/APC connector. 8-Wavelength, One Fiber Output Illumination System OBIS Galaxy Integrated Laser System Laser Light Engines FEATURES APPLICATIONS

  • Plug-and-play 8-input, singleoutput beam combiner
  • Compact and low profile
  • High-transmission beam combiner with typical 60% throughput per channel
  • Fiber FC/APC output connector, optional FC/PC8
  • Optogenetics
  • Endoscopy
  • Microscopy
  • Cytometry
  • Genomics Example of OBIS Galaxy Integrated Laser System with 3 lasers and covers removed.

OBIS Galaxy Integrated Laser System Example of Laser Box with 5 lasers loaded. Cover removed. Purchase a second Laser Box for applications requiring 6-10 lasers total. OBIS Galaxy Beam Combiner. 8 fiber input connectors, one combined output in a 2-meter fiber with FC/PC8 or FC/APC connector. Example shown is 3 lasers with cover removed.

OBIS Galaxy Integrated Laser System Example of 3-Laser Galaxy with covers installed and power supply. OBIS Galaxy Integrated System The OBIS Galaxy Integrated System is assembled, tested, and shipped on a 711 x 305 mm (28 x 12 inch) plate. Add additional OBIS Galaxy lasers (sold separately) to increase your system capabilities.

OBIS Galaxy Integrated Laser System Three-Laser Galaxy Integrated Laser System. Assembled and Tested as a Turn-key System. Part Number As a turnkey configuration the OBIS Galaxy Laser Combining System includes: 1. OBIS 405 nm LX 50 mW F iber Pigtailed Galaxy Laser, FC/UFC 2. OBIS 488 nm LX 30 mW F iber Pigtailed Galaxy Laser, FC/UFC 3. OBIS 640 nm LX 75 mW F iber Pigtailed Galaxy Laser, FC/UFC 4. OBIS Galaxy, compatible with 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 n m, 594 nm, 640 nm a. Includes 2 meter output fiber with FC/APC Connector 5. Laser Box, 5-mounting bays (with 50 Ohm Digital Modulation Impedance) a. Includes power supply and control software 6. System pre-assembled, tested, and mounted onto system plate 1311750 3-Laser Galaxy Integrated Laser System shown with covers removed on the Galaxy and Laser Box. Unit ships with covers and power supply.

OBIS Galaxy Integrated Laser System Three-Laser Galaxy Integrated Laser System. Assembled and Tested as a Turn-key System. Part Number As a turnkey configuration the OBIS Galaxy Laser Combining System includes: 1. OBIS 488 nm LX 100 mW F iber Pigtailed Galaxy Laser, FC/UFC 2. OBIS 561 nm LX 80 mW F iber Pigtailed Galaxy Laser, FC/UFC 3. OBIS 640 nm LX 75 mW F iber Pigtailed Galaxy Laser, FC/UFC 4. OBIS Galaxy, compatible with 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 n m, 594 nm, 640 nm a. Includes 2 meter output fiber with FC/APC Connector 5. Laser Box, 5-mounting bays (with 2000 Ohm Digital Modulation Impedance) a. Includes power supply and control software 6. System pre-assembled, tested, and mounted onto system plate 1451749 3-Laser Galaxy Integrated Laser System shown with covers removed on the Galaxy and Laser Box. Unit ships with covers and power supply.

OBIS Galaxy Integrated Laser System Four-Laser Galaxy Integrated Laser System. Assembled and Tested as a Turn-key System. Part Number As a turnkey configuration the OBIS Galaxy Laser Combining System includes: 1. OBIS 488 nm LX 100 mW F iber Pigtailed Galaxy Laser, FC/UFC 2. OBIS 532 nm LS 80 mW F iber Pigtailed Galaxy Laser, FC/UFC 3. OBIS 594 nm LS 60 mW F iber Pigtailed Galaxy Laser, FC/UFC 4. OBIS 640 nm LX 75 mW F iber Pigtailed Galaxy Laser, FC/UFC 5. OBIS Galaxy, compatible with 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 n m, 594 nm, 640 nm a. Includes 2 meter output fiber with FC/APC Connector 6. Laser Box, 5-mounting bays (with 2000 Ohm Digital Modulation Impedance) a. Includes power supply and control software 7. System pre-assembled, tested, and mounted onto system plate 1446060 4-Laser Galaxy Integrated Laser System shown with covers removed on the Galaxy and Laser Box. Unit ships with covers and power supply.

OBIS Galaxy Integrated Laser System Five-Laser Galaxy Integrated Laser System. Assembled and Tested as a Turn-key System. Part Number As a turnkey configuration the OBIS Galaxy Laser Combining System includes: 1. OBIS 488 nm LX 100 mW F iber Pigtailed Galaxy Laser, FC/UFC 2. OBIS 532 nm LS 80 mW F iber Pigtailed Galaxy Laser, FC/UFC 3. OBIS 561 nm LS 80 mW F iber Pigtailed Galaxy Laser, FC/UFC 4. OBIS 594 nm LS 60 mW F iber Pigtailed Galaxy Laser, FC/UFC 5. OBIS 640 nm LX 75 mW Fiber Pigtailed Galaxy Laser , FC/UFC 6. OBIS Galaxy, compatible with 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 n m, 594 nm, 640 nm a. Includes 2 meter output fiber with FC/APC Connector 7. Laser Box, 5-mounting bays (with 2000 Ohm Digital Modulation Impedance) a. Includes power supply and control software 8. System pre-assembled, tested, and mounted onto system plate 2252231 5-Laser Galaxy Integrated Laser System shown with covers removed on the Galaxy and Laser Box. Unit ships with covers and power supply.

OBIS Galaxy Integrated Laser System Specifications OBIS Galaxy Laser Combiner for the Integrated System Power Throughput (%) for 405 nm to 590 nm for 640 nm >45, Typical >60 >55, Typical >70 Maximum Total Output Power (mW) <500 RMS Noise (%) (20 Hz to 2 MHz) <0.5 Peak-to-Peak Noise (%) (20 Hz to 20 kHz) <2 Fiber Connector Type (Input Connectors) FC form-factor, ultra-flat contact FC/UFC with extended-life interface, anti-reflection (AR) coated tip Polarization Extinction Ratio Loss (%) <50 Long-Term Power Throughput (%) (8 hours, ±8°C) >95 Long-Term Power Throughput (%) (average) ≤2 over 1000 hours Output Fiber Fiber Connector Type (distal end), FC/APC 8° angled, with extended-life interface Fiber Cable Type 3 mm mono-coil Fiber Cable Length (m) (minimum) 2 Fiber Numerical Aperture (NA) (1/e²) 0.055 Mode Field Diameter (μm) (typical) 3 Spatial Mode TEM⁰⁰ M² (Beam Quality) ≤1.1 Fiber Minimum Bend Radius 51 mm (2.0 in.) Fiber Tensile Load (maximum) 1 kg (2.2 lbs.) Notes: 1. System specifications measured at 25°C. 2. The OBIS Galaxy Beam Combiner as tested and certified will be >60% power transmission per wavelength as measured with production tooling fixtures. 3. Fiber connector output not compatible for patchcord-to-patchcord connection. 4. M² measured with ModeMaster with 90/10 Clip Levels.

OBIS Galaxy Integrated Laser System Utility and Environmental Requirements Dimensions 229 x 170 x 29 mm (9.0 x 6.7 x 1.1 in.) Weight 1.4 kg (3 lbs.) Shock Tolerance (g) (11 ms) 30 Vibration (g-RMS) (20 Hz to 2 kHz) 7.7 Ambient Temperature Operating Temperature Storage Temperature 10 to 50°C (50 to 122°F) -20 to 60°C (-4 to 140°F) Laser Safety Classification CLASS 4 Notes: 1. Non-Operational with a before/after change of <10%. 2. OBIS LS laser with Operating Temperature of 15 to 40°C (59 to 104°F). 3. Class 4 laser product IEC 60825-1 (2007), OEM component, does not comply with 21 CFR 1040.10 and 1040.11. Mechanical Specifications OBIS Galaxy 405 nm OUTPUT 445/458 nm 488 nm 640 nm 590/594 nm 552/561 nm 532 nm 514 nm 225 mm (8.9 in.) 222.7 mm (8.8 in.) 50 mm (2.0 in.) 169.6 mm (6.7 in.)25.4 mm (1.0 in.) 228.6 mm (9.0 in.) 29.1 mm (1.1 in.) 405 nm OUTPUT 445/458 nm 488 nm 640 nm 590/594 nm 552/561 nm 532 nm 514 nm 225 mm (8.9 in.) 222.7 mm (8.8 in.) 50 mm (2.0 in.) 169.6 mm (6.7 in.)25.4 mm (1.0 in.) 228.6 mm (9.0 in.) 29.1 mm (1.1 in.) Top View Side View 405 nm OUTPUT 445/458 nm 488 nm 640 nm 590/594 nm 552/561 nm 532 nm 514 nm 225 mm (8.9 in.) 222.7 mm (8.8 in.) 50 mm (2.0 in.) 169.6 mm (6.7 in.)25.4 mm (1.0 in.) 228.6 mm (9.0 in.) 29.1 mm (1.1 in.)

OBIS Galaxy Integrated Laser System Mechanical Specifications OBIS Laser Box 76.2 mm (3.0 in.) 50 mm (2.0 in.) 208.6 mm (8.2 in.) 204.2 mm (8.0 in.) 28 mm (1.1 in.) 0 mm (0.0 in.) 135.8 mm (5.3 in.) 123.1 mm (4.8 in.) 84.6 mm (3.3 in.) 96.6 mm (3.8 in.) 0 mm (0.0 in.) 62.3 mm (2.5 in.) 205.0 mm (8.1 in.) 160.5 mm (6.3 in.) 116.1 mm (4.6 in.) 71.6 mm (2.8 in.) 27.2 mm (1.1 in.) 0 mm (0.0 in.) Ø7.0 (3) Thru (8X) 275 mm (10.8 in.)5 Bays for OBIS Lasers 184.2 mm (7.3 in.) Air Intake with Cleanable Air Filters Ø11.4 (0.5 in.) Fiber/Free Space Beam Exit Holes (5X) 4-40 Tapped Holes (2X) 3.6 mm (0.14 in.) Deep Both Sides 85.7 mm (3.4 in.) 14.2 mm (0.6 in.) Laser Interlock Power USB Communications Mini-B Holes for Mounting OBIS Galaxy Unit 4X #4 Countersink Clearance Hole from Opposite Side Included Hole Cover Plugs Not Shown Air Exhaust, 3X <509 L/min. (18 CFM) Total Removable Mounting Brackets (2X) Key Switch Analog/Digital Modulation Input and Status LED for Each Laser System Status LED Power Button RS-232 Communications 241.3 mm (9.5 in.) 86.2 mm (3.4 in.) 87.8 mm (3.5 in.) to Rubber Feet Top View Front View With Top Cover Removed Side View (Mounting Bracket Shown Removed) Rear View FC/APC Distal End - Output 38.1 mm (1.5 in.) 40 mm (1.57 in.) 4 mm (0.16 in.) 3 mm (0.12 in.) 64 mm (2.52 in.) 30 mm (1.18 in.) 5 mm (0.2 in.) 4X Ø3.2 mm Thru (0.13 in.) 1m (minimum) (39.4 in.) 5.1 mm (0.2 in.) FC Connector Key Vertical Polarization ±2° Max. Laser Exit Aperture Polish Direction Axis ±4° Max. View of Fiber from Connector End 3 mm PVC Coated Monocoil Tubing Min. Bend Radius 50 mm (2.0 in.) FC Connector Key Narrow Key - Type R (2.0 mm +0.02/-0.03 mm Key Width) 8.0° ±0.5° OEM Label

OBIS Galaxy Integrated Laser System © 2023 Coherent Corp. Legal notices : coherent.com/legal For more information www.coherent.com OBIS Galaxy Laser Combiner, Includes Output Fiber - Lasers sold separately Part Number 8 Input FC/UFC, Single Output FC/APC, 405 nm, 458 nm, 488 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm 2261537 8 input FC/UFC, Single Output FC/PC8, 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm 1415671 8 input FC/UFC, Single Output FC/APC, 405 nm, 445 nm, 488 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm 1363484 8 input FC/UFC, Single Output FC/APC, 405 nm, 445 nm, 473 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm 1399474 OBIS FP LX Lasers for OBIS Galaxy Part Number OBIS 405 nm LX 50 mW Laser: Fiber Pigtail: UFC, Galaxy, 404 nm to 406 nm 1236438 OBIS 405 nm LX 100 mW Laser: Fiber Pigtail: UFC, Galaxy, 404 nm to 406 nm 1236439 OBIS 405 nm LX 200 mW Laser: Fiber Pigtail: UFC, Galaxy, 404 nm to 406 nm 2279120 OBIS 445 nm LX 45 mW Laser: Fiber Pigtail: UFC, Galaxy, 444 nm to 446 nm 1236441 OBIS 458 nm LX 45 mW Laser: Fiber Pigtail: UFC, Galaxy, 457 nm to 459 nm 1236442 OBIS 473 nm LX 50 mW Laser: Fiber Pigtail: UFC, Galaxy, 472 nm to 474 nm 1399476 OBIS 473 nm LX 150 mW Laser: Fiber Pigtail: UFC, Galaxy, 472 nm to 474 nm 2279124 OBIS 488 nm LX 30 mW Laser: Fiber Pigtail: UFC, Galaxy, 487 nm to 489 nm 1236443 OBIS 488 nm LX 100 mW Laser: Fiber Pigtail: UFC, Galaxy, 487 nm to 489 nm 1236444 OBIS 514 nm LX 50 mW Laser: Fiber Pigtail: UFC, Galaxy, 513 nm to 515 nm 1311150 OBIS 640 nm LX 75 mW Laser: Fiber Pigtail: UFC, Galaxy, 641 nm to 643 nm 1236445 OBIS 640 nm LX 130 mW Laser: Fiber Pigtail: UFC, Galaxy, 641 nm to 643 nm 2279132 OBIS FP LS Lasers for OBIS Galaxy Part Number OBIS 488 nm LS 150 mW Laser: Fiber Pigtail: UFC, Galaxy, 487 nm to 489 nm 2279128 OBIS 532 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy, 531 nm to 533 nm 1276599 OBIS 532 nm LS 150 mW Laser: Fiber Pigtail: UFC, Galaxy, 531 nm to 533 nm 2279130 OBIS 552 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy, 551.5 nm to 553.5 nm 1275619 OBIS 561 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy, 560.5 nm to 562.5 nm 1275608 OBIS 561 nm LS 150 mW Laser: Fiber Pigtail: UFC, Galaxy, 560.5 nm to 562.5 nm 2279131 OBIS 594 nm LS 60 mW Laser: Fiber Pigtailed: UFC, Galaxy, 592 nm to 594 nm 1363485 Notes: 1. All OBIS Galaxy FP lasers same as standard OBIS FP lasers with the exception of ±1 nm center wavelength tolerances and an ultra-flat contact FC/UFC termination with extended-life interface, anti-reflection (AR) coating on fiber tip. NOTE: OBIS Galaxy Lasers include: laser and mounting hardware. The following needs to be ordered separately: OBIS LaserBox (part numbers 1228877 or 1343229), OBIS Remote (part number 1214875), or OBIS Heat Sink (part number 1193289). See OBIS LX/LS Family datasheet for details.