12614 EKTOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Professional IP65 Weatherproof Batten, DALI Smartest and most feature inclusive batten on the market. Provides long life and unrivaled control. Flicker-free dimming throughout the dimming range which allows light level adjustment to gain maximum power savings. IP65 weatherproof rating and IK08 impact rating. LED lifetime >102,000 hours (L70), >102,000 hours (L80) and 55,000 hours (L90). 12 years design life at max. ambient Full support for DALI and DALI-2 (IEC 62386) DT6 (LED). Power monitoring (DT51) allows control systems to montior and report active power and total power consumption. Built-in DALI-2 switch can be used for standalone control or unlimited control with DALI-2 compliants control systems. Lynk wireless control allows for remote test and monitoring and provides full lighting control (AS/NZS 62386-104).
ORDERING INFORMATION
Description Ektor Lynk Umbra 1200mm LED IP65 batten - PRO w/wireless Driver Type Wireless (IEC62386-104) with DT6 Item Code EV-UMBRA-PRO-IP65-1200-LK EFFICIENCIES Total System Efficiency 137 lm/W The performance of each component of a luminaire is demonstrated through its efficiencies, which together determine the total system efficiency of the product. The output of the LED chip is first multiplied by the optical and thermal efficiencies to calculate the Luminaire efficiency. However, this calculation does not consider the driver efficiency. To determine the overall efficiency of the system, the Luminaire efficiency must be multiplied by the driver efficiency, which accounts for all losses in the system. MECHANICAL Body Material Polycarbonate Diffuser Material Polycarbonate Fitting Colour Grey IK Rating IK08 Installation Type Surface mount IP Rating IP65 ELECTRICAL Electrical Rating Class I Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% Maximum Wattage 33 W Power Factor 0.95 Standby Power 0.3 W Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge. Switch Type Inbuilt Mains Rated DALI Switch A Terminal input has been provided to allow the wiring of a Main rated switch input. This input can be programmed to switch any controlled area when using a DALI-2 compliant control system. This input supports IEC62386-301 1300 438 658 sales@evolt.com.au ektor.com.au © 2025 Evolt Generated on 3rd of February 2025 06:10:45 - Page 1
(momentary or rocker switches), IEC62386-302 (on /off switches) and IEC62386-303 (mains rated sensor inputs). System Max Wattage 30 W Working Temp Range -20 to 40 °C LAMP Macadam Steps (SDCM) 3-step MacAdam Ellipse CCT Configuration Single Colour Rendering Index (CRI) >84 Lamp/LED Current 850 mA Lamp/LED voltage 36 V LED LIFETIME LED Lifetime >102000 hrs This is the Reported LED Lifetime in Hours based on TM-21. Ektor does not list the projected or calculated LED lifetime, which is normally longer as TM-21 Addendum B explicitly states "The Calculated and Projected Lp(Dk) are not to be reported". This Lifetime refers to the life of a single LED however the system life is longer since the probability and binomial distribution of all LEDs in the system means that the average led is performing above the specification and compensates for the LEDs falling below. Ambient Temp (°C) 25 °C 40 °C L90B10 55000 hrs 55000 hrs This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output and is tested accordingly to TM-21. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. After the defined lifetime, the system will reach the defined lumen depreciation and the average led failures is defined by the B rating. The B rating is defined in and tested to IEC62717. TM-21 Test Hours 17000 hrs COLOUR TEMPERATURE CCT 4000 K Luminaire Lumens 4100 lm All photometric data has a tolerance of ±10%. Luminaire lumens refers to the exit lumens or delivered lumens from the luminaire. DRIVER Dimmable Yes Driver Included Yes Integrated Driver No Driver Mode Constant Current Driver Type Wireless (IEC62386-104) with DT6 Power Monitoring DALI Device type 51 power monitoring Inbuilt DALI-2 support for Device type 51 - Power monitoring for use with DALI-2 compliant control systems which allows the reporting of the products total power consumption for power aggregation and measurements. Wiring Type Re-wireable terminal block (6 pin) COMPLIANCE Product Design Life 12 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. Standards AS/NZS 60598.1 AS/NZS 60598.2.1 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 4268 IEC 62386-102 IEC 62386-103 IEC 62386-104 WARRANTY Commercial Use Warranty 5Y return to base on General lighting components First 2Y includes an exclusive onsite warranty VIP Warranty 2 Onsite, 3 RTB (Total 5 Years) VIP warranty is available to registered users and is subjected to additional terms and conditions. Warranty Operating Hours 30000 hrs This product is provided with a warranty up until the stated warranty period or until the stated warranty operating hours has been reached (whichever occurs first). DIMENSIONS Product Height 93 mm Product Length 1260 mm Product Width 130 mm LINE DRAWINGS Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 3rd of February 2025 06:10:45 - Page 2
EV/UMBRA/PRO/IP65/1200/EM (EM) EV/UMBRA/PRO/IP65/1200 (4000K) ACCESSORIES Order code 12404 Description Plastic Clips (10) Kit for Umbra ADV and PRO Battens Item Code CLIPS-AT9890-96/P Order code 11465 Description UMBRA Advanced and Pro vandal resist SS316 clips/screw/allen key- kit (10 pack) Item Code EV-SS316-WP-CLIPS Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 3rd of February 2025 06:10:45 - Page 3