1261271 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 13

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Connector in molded plastic on both sides, M17-Socket, Straight, plastic molded, number of positions: 17, type of locking: Screw locking mechanism, on M17-Pin, Straight, plastic molded, number of positions: 17, cable length: 5 m, shielded: yes, color of outer sheath: green, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Your advantages Our standard: robust halogen-free PUR cable• Simple and safe: 100% electrically tested and assembled ready for use Designs with preassembled cables on one or both sides High flexibility: customer-specific assemblies and cable lengths can be supplied Commercial data Item number 1261271 Packing unit 1 pc Minimum order quantity 2 pc Note Made to order (non-returnable) Product key ABRDBG GTIN 4063151419417 Weight per piece (including packing) 713 g Weight per piece (excluding packing) 769.755 g Country of origin DE K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 1 (13)

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it. Safety note
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 2 (13)

Product type Signal and power cable Connector Connector specifications Type Straight, plastic molded Housing material Zinc die-cast Thread type M17 Type of locking Screw locking mechanism Degree of protection IP67, when in locked state No. of pos. 17 Direction of rotation Standard Contact switching type Socket Insertion/withdrawal cycles 50 Contact resistance < 0.3 mΩ Max. current 3.6 A

48 V ACVoltage

74 V DC

Rated surge voltage 1.5 kV Ambient temperature (operation) -40 °C ... 105 °C Cable specifications Cable type SSLC11Y Shielded yes Cable structure 3 x 2 x 0.14 mm² + 2 x 0.5 mm² + 4 x 0.14 mm² + 4 x 0.22 mm² Cable structure (AWG) 26 AWG/3pr + 20 AWG/2c + 26 AWG/4c + 24 AWG/4c External cable diameter 9.40 mm Outer sheath, material TPU Material wire insulation TPU External sheath, color green Nominal voltage, cable 30 V Test voltage 0.5 kV Rated current 9 A Smallest bending radius, fixed installation 38 mm Smallest bending radius, movable installation 94 mm -30 °C ... 80 °CAmbient temperature (operation) for fixed installation -30 °C ... 60 °C Connector specifications (second page) Type Straight, plastic molded Housing material Zinc die-cast Thread type M17 K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 3 (13)

Degree of protection IP67, when in locked state No. of pos. 17 Direction of rotation Standard Contact switching type Pin Insertion/withdrawal cycles 50 Contact resistance < 0.3 mΩ Max. current 3.6 A Rated surge voltage 1.5 kV Ambient temperature (operation) -40 °C ... 105 °C Electrical properties Nominal current IN 3.6 A Cable/line Cable length 5 m K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 4 (13)

0,22 mm 0,22 mm 0,22 mm 0,5 mm 0,5 mm BN/GY 0,14 mm 0,14 mm 13 13 RD OR0,14 mm 0,14 mm 0,14 mm 0,14 mm 0,14 mm 0,14 mm 0,22 mm K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 5 (13)

R Pin assignment of pin Dimensional drawing ≈76 Ø21,2M17x1 On the female side K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 6 (13)

M17x1Ø21,3 ≈74,2 Pin side Schematic diagram Socket pin assignment K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 7 (13)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1261271  EAC Approval ID: 19060508 K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 8 (13)

ECLASS-11.0 27060106 ECLASS-12.0 27060106 ECLASS-13.0 27060106 ETIM ETIM 9.0 EC003250 K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 9 (13)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 10 (13)

https://www.phoenixcontact.com/us/products/1013151 Insert label, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: slide-on, cable diameter range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20 PABA YE/15 - Insert label 1013698 https://www.phoenixcontact.com/us/products/1013698 Insert label, Strip, yellow, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: slide-on, cable diameter range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20 K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 11 (13)

https://www.phoenixcontact.com/us/products/1013944 Insert label, Strip, red, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: slide-on, cable diameter range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20 B-STIFT - Marker pen 1051993 https://www.phoenixcontact.com/us/products/1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 12 (13)

CUTFOX-S VDE - Diagonal cutter 1212207 https://www.phoenixcontact.com/us/products/1212207 Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com K-17-M17 M9/5,0-E01/M17 F8X - Connector in molded plastic on both sides 1261271 https://www.phoenixcontact.com/us/products/1261271 Jul 2, 2024, 6:49 AM Page 13 (13)