12562 EKTOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Mercury Professional Emergency Exit, 24m Single and double sided decals Soft-start charger to reduce building load Available in low illumination area black model IP65 Weatherproof Case available but not included Fast emergency switch-over (<0.5s) for high-task areas Wall, ceiling, chain and rod mounting (with Rod Mount Kit) Long life electronics 12 years design life at max. ambient High Quality Lithium battery (LiFePO4) and smart charger Standalone (SPU) Self test (AS2293/ IEC62034 IEC62386 over IEC62386-104 Ektor wired monitored system
ORDERING INFORMATION
Description Mercury Pro Emergency Exit - 24M - Black Driver Type DALI DT1 Emergency Item Code EV-MERCURY-PRO-24M-B-DA MECHANICAL Body Material Polycarbonate Diffuser Material Polycarbonate Fitting Colour Black Installation Type Wall or Ceiling IP Rating IP20 ELECTRICAL Electrical Rating Class II Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% Maximum Wattage 4.5 W Standby Power 3 W Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge. Working Temp Range 0 to 40 °C COLOUR TEMPERATURE LED Wattage 1.5 W DRIVER Dimmable No Driver Included Yes Driver Type DALI DT1 Emergency Wiring Type Re-wireable terminal block (5 pin) EMERGENCY (EM SUFFIX) Replacement Battery Code 13845 Emergency Control DALI Monitored (DT1) DALI Monitored ~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202. Decal Size 300 x 150 mm Emergency Duration 90 mins Emergency Mode Maintained Emergency Output Power 1500 mW Viewing Distance 24 m 1300 438 658 sales@evolt.com.au ektor.com.au © 2025 Evolt Generated on 5th of February 2025 04:22:17 - Page 1
Product Design Life 12 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. Standards AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 WARRANTY Commercial Use Warranty 8 RTB (Total 8 Years) DIMENSIONS Product Height 211 mm Product Length 326 mm Product Width 80 mm LINE DRAWINGS EV/MERCURY PHOTOMETRICS EV/MERCURY_03135_2hr Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 5th of February 2025 04:22:17 - Page 2
ORDER CODE ITEM CODE DESCRIPTION
01915 EV-CANTILEVER Cantilever bracket to suit 3135- 3137- 11258 & 3131
03922 EV-MERCURY-CASE Weatherproof Case for Mercury
11220 EV-MERCURY-CD-1 Mercury custom decal to suit 11258 and 3135 - 1pc
11216 EV-MERCURY-CD-2 Mercury Clear Decal to suit 11258 and 3135 - 2pk
01996 EV-MERCURY-DP-B Mercury III decal pack - Black
03911 EV-MERCURY-WIREGUARD-CEILING Ceiling mounted only Wire guard
05301 EV-MERCURY-WIREGUARD-WALL Wall mounted only Wire guard
02004 EV-RODMOUNT-BLK Rodmount Brackets only for roof and luminaire body - Black (Rod size -25mm)
01990 EV-RODMOUNT-WHT Rodmount Brackets only for roof and luminaire body - White (Rod size 25mm)
Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 5th of February 2025 04:22:17 - Page 3