ML12561 LANSDALE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

nally for MECL and TTL outputs.

  • Frequency Range = 2.0 to 20 MHz
  • Operating Temperature Range TA = –55° to +125°C
  • Single Supply Operation: +5.0 Vdc or –5.2 V DC
  • Three Outputs Available: 1.Complementary Sine Wave (600 mVpp typ) 2.Complementary MECL 3.Single Ended TTL CERDIP 16 = E CERAMIC PACKAGE CASE 620 CROSS REFERENCE/ORDERING INFORMATION MOTOROLA CERDIP 16 12561/BEA ML12561/BEA LANSDALEPACKAGE

Figure 1. Block Diagram

71 V CC 432 1 4 1 5 1 6 V CC 13 12 11 V CC

LANSDALE Semiconductor, Inc.ML12561

ELECTRICAL CHARACTERISTICS

Under 0°C +25°C +75°C Characteristic Symbol Under Test Min Max Min Typ Max Min Max Unit Power Supply Drain Current ICC 1 – – 13 16 19 – – mAdc 3.0 4.0 Input Current IinH 14 250 250 µAdc IinL 14 1.0 1.0 µAdc Differential Offset Voltage ∆V 4 to 7 2 to 3 –200 325 +200 mAdc Output Voltage Level Vout 2 3.5 3.5 Vdc Logic ‘1’ Output Voltage VOH1 (Note 1) 4.0 4.0 4.16 4.16 4.04 4.04 4.19 4.19 4.1 4.1 4.28 4.28 Vdc Logic ‘0’ Output Voltage VOL1 (Note 1) 2.98 2.98 3.43 3.43 3.0 3.0 3.44 3.44 3.02 3.02 3.47 3.47 Vdc VOL2 10 0.5 0.5 0.5 0.5 0.5 0.5 Logic ‘1’ Threshold Voltage VOHA 12 3.98 3.98 4.02 4.02 4.08 4.08 Vdc Logic ‘0’ Threshold Voltage VOLA 12 3.45 3.45 3.46 3.46 3.49 3.49 Vdc Output Short Circuit Current IOS 10 20 60 20 – 60 20 60 mAdc NOTE: 1. Devices will meet standard MECL logic levels using VEE = –5.2 Vdc and VCC = 0. www.lansdale.comPage 2 of 9 Issue 0

www.lansdale.comPage 3 of 9 Issue 0 LANSDALE Semiconductor, Inc.ML12561 ELECTRICAL CHARACTERISTICS (continued) TEST VOLTAGE/CURRENT VALUES Volts @ Test Temperature VIHmax VILmin VIHAmin VILAmax VIHT VCCL Pin Under TEST VOLTAGE APPLIED TO PINS LISTED BELOW Characteristic Symbol Under Test VIHmax VILmin VIHAmin VILAmax VIHT VCCL Gnd Power Supply Drain Current ICC 1 – – – – – – 8 8,9 Input Current IinH 14 IinL 14 8,14 8,15 Differential Offset Voltage ∆V 4 to 7 2 to 3 5,6 Output Voltage Level Vout 2 Logic ‘1’ Output Voltage VOH1 (Note 1) VOH2 10 15 14 – – – 11,16 8,9 Logic ‘0’ Output Voltage VOL1 (Note 1) VOL2 10 11,16 8,9 8,9 Logic ‘1’ Threshold Voltage VOHA 12 Logic ‘0’ Threshold Voltage VOLA 12 Output Short Circuit Current IOS 10 15 14 – – – 11,16 8,9,10 NOTE: 1. Devices will meet standard MECL logic levels using VEE = –5.2 Vdc and VCC = 0.

www.lansdale.comPage 4 of 9 Issue 0 LANSDALE Semiconductor, Inc.ML12561 ELECTRICAL CHARACTERISTICS (continued) TEST VOLTAGE/CURRENT VALUES Volts mA @ Test Temperature VCC VCCH IOL IOH IIL Pin Under TEST VOLTAGE APPLIED TO PINS LISTED BELOW Characteristic Symbol Under Test VCC VCCH IOL IOH IIL Gnd Power Supply Drain Current ICC 1 1 – – – – 8 11,16 8,9 Input Current IinH 14 IinL 14 8,14 8,15 Differential Offset Voltage ∆V 4 to 7 2 to 3 Output Voltage Level Vout 2 Logic ‘1’ Output Voltage VOH1 (Note 1) VOH2 10 – – – 10 – 8,9 Logic ‘0’ Output Voltage VOL1 (Note 1) VOL2 10 11,16 8,9 8,9 Logic ‘1’ Threshold Voltage VOHA 12 Logic ‘0’ Threshold Voltage VOLA 12 Output Short Circuit Current IOS 10 – – – – – 8,9,10 NOTE: 1. Devices will meet standard MECL logic levels using VEE = –5.2 Vdc and VCC = 0.

Figure 13. Circuit Schematic

www.lansdale.comPage 9 of 9 Issue 0 LANSDALE Semiconductor, Inc.ML12561 CERDIP 16 = E CERAMIC PACKAGE (ML12561/BEA) CASE 620 ISSUE R NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. –A– B F C S H G D J L M 16 PL SEATING 916 K PLANE–T– MAM0.25 (0.010) T DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.740 0.770 18.80 19.55 B 0.250 0.270 6.35 6.85 C 0.145 0.175 3.69 4.44 D 0.015 0.021 0.39 0.53 F 0.040 0.70 1.02 1.77 G 0.100 BSC 2.54 BSC H 0.050 BSC 1.27 BSC J 0.008 0.015 0.21 0.38 K 0.110 0.130 2.80 3.30 L 0.295 0.305 7.50 7.74 M 0 10 0 10 S 0.020 0.040 0.51 1.01 OUTLINE DIMENSIONS Lansdale Semiconductor reserves the right to make changes without further notice to any products herein to improve reliabili- ty, function or design. Lansdale does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. “Typical” parameters which may be provided in Lansdale data sheets and/or specifications can vary in different applications, and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by the customer’s technical experts. Lansdale Semiconductor is a registered trademark of Lansdale Semiconductor, Inc.