1242014

1242014 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 14

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector front mounting with knurled nut, straight, Screw locking mechanism, M40, number of positions: 4+3+PE, contact connection type: Socket, Axial O-ring, 4x Ø4,2, shielded: yes, flange dimensions: 40 mm x 40 mm, degree of protection: IP67, cable diameter range: 0 mm ... 0 mm, number of positions: 8, connection method: Crimp connection, series: SM, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Commercial data Item number 1242014 Packing unit 1 pc Minimum order quantity 1 pc Product key ABRBGN GTIN 4063151396329 Weight per piece (including packing) 323 g Weight per piece (excluding packing) 22.22 g Country of origin DE SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 1 (14)

Order information: Order crimp contacts 4 x Ø 2 mm, 4 x Ø 3.6 mm separately Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the Safety note SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 2 (14)

ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Front mounting Mounting 4x Ø4,2 Product properties Product type Circular connectors (device side) Series SM Application Power Number of positions 8 Connection profile 4+3+PE Shielded yes Coding N Thread type M40 Data management status Article revision 04 Dimensions Housing Flange dimensions 40 mm x 40 mm Material specifications Seal material FPM Housing material Metal Housing material Turned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD- Zn) Insulator material PA 6.6 Gasket and O-ring material FPM Electrical properties Contact Contact diameter 3.6 mm Max. current 70 A Nominal voltage UN 630 V Overvoltage category III Degree of pollution 3 Rated surge voltage 6 kV Contact Contact diameter 2 mm SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 3 (14)

Max. current 30 A Nominal voltage UN 250 V Overvoltage category III Degree of pollution 3 Rated surge voltage 4 kV Connection data Conductor connection Connection method Crimp connection Contact connection type Socket Connector Type straight Cable/line External cable diameter 0 mm ... 0 mm Environmental and real-life conditions Ambient conditions Degree of protection IP67 Ambient temperature (operation) -40 °C ... 125 °C Altitude 3000 m SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 4 (14)

Ø32 +0,1 4xM 45° Ø42,4 ±0,1 Installation dimensions SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 5 (14)

SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 6 (14)

74,7 Ø46 4xØ4,2 Dimensional drawing Diagram 0 10 20 30 40 50 60 70 80 90 100110 I [A]  [°C] = 3x16 + 4x1,5 mm 120130 I = current strength, T = ambient temperature SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 7 (14)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1242014  cUL Recognized Approval ID: E153689-20230511 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 Power 600 V 35 A 8 - 8 - Signal 250 V 4 A 14 - 14 -  UL Recognized Approval ID: E153698-20230511 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 Power 600 V 45 A 8 - 8 - Signal 250 V 4 A 14 - 14 - cULus Recognized SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 8 (14)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 9 (14)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 10 (14)

SM-36KS0,25-2,50 - Crimp contact 1241977 https://www.phoenixcontact.com/us/products/1241977 Crimp contact, Socket, turned, Single contact, contact diameter: 3.6 mm, crimp without Exemption 6c (Pb < 0.1 %) SM-36KS1,50-6,00 - Crimp contact 1241979 https://www.phoenixcontact.com/us/products/1241979 Crimp contact, Socket, turned, Single contact, contact diameter: 3.6 mm, crimp range: 1.5 mm2 ... 6 mm2, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 11 (14)

SM-36KS6,00-10,00 - Crimp contact 1241980 https://www.phoenixcontact.com/us/products/1241980 Crimp contact, Socket, turned, Single contact, contact diameter: 3.6 mm, crimp range: 6 mm2 ... 10 mm2, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) SF-20KS0,06-1,00 - Crimp contact 1241952 https://www.phoenixcontact.com/us/products/1241952 Crimp contact, Socket, turned, Single contact, contact diameter: 2 mm, crimp range: 0.06 mm2 ... 1 mm2, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 12 (14)

SF-20KS0,25-2,50 - Crimp contact 1237431 https://www.phoenixcontact.com/us/products/1237431 Crimp contact, Socket, turned, Single contact, contact diameter: 2 mm, crimp without Exemption 6c (Pb < 0.1 %) SF-20KS1,50-4,00 - Crimp contact 1241949 https://www.phoenixcontact.com/us/products/1241949 Crimp contact, Socket, turned, Single contact, contact diameter: 2 mm, crimp range: 1.5 mm2 ... 4 mm2, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 13 (14)

PROT-M40-PW-IT-IP20 - Plastic protective cap 1577213 https://www.phoenixcontact.com/us/products/1577213 Plastic protective cap, M40, degree of protection: IP20, series: SM, SB Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SM-7ES1N8AY000X - Device connector front mounting with knurled nut 1242014 https://www.phoenixcontact.com/us/products/1242014 Jul 26, 2024, 6:35 AM Page 14 (14)