1240072

1240072 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector, rear mounting, CC link, 4-position, PVC, red, similar to RAL 3000, Socket, straight, M12, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 1 m, CC-Link, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb <0. 1%) Your advantages Preassembled with cables in various standard lengths for immediate use• Customer-specific assemblies and cable lengths can be supplied Sealed on the cable side for optimum tightness of seal Cable designs for all common networks and fieldbuses For high transmission safety: shield connection to the housing with optional EMC nut Commercial data Item number 1240072 Packing unit 1 pc Minimum order quantity 1 pc Product key ABQDGG GTIN 4063151395124 Weight per piece (including packing) 96.3 g Weight per piece (excluding packing) 96.3 g Country of origin DE SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 1 (12)

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. General Lock nut is included in the scope of delivery Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory Safety note SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 2 (12)

section of the product at phoenixcontact.com/products

• Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting M16 x 1.5 With flat nut Assembly instructions With flat nut Connection method Cable connection Product properties Product type Circular connectors (device side) Sensor type CC link Number of positions 4 No. of cable outlets 1 Shielded yes Coding A Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material FKM Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material for screw connection Brass, nickel-plated Outer sheath, material PVC Electrical properties Rated surge voltage 2.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 10 MΩ Nominal voltage UN 250 V Nominal current IN 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) Transmission medium Copper SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 3 (12)

Connection method Cable connection Contact connection type Socket

2 NmTightening torque

Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Coding A Connection 2 Head design free cable end Cable/line Cable length 1 m CC-Link [990] Cable weight 78.8 kg/km Number of positions 3 Shielded yes Cable type CC-Link [990] Conductor structure 3xAWG20/7 + 1xAWG22/19 (filler litz wire) Conductor structure signal line 7x 0.28 mm AWG signal line 20 Conductor cross section 0.5 mm² External cable diameter 7.7 mm Outer sheath, material PVC External sheath, color red Conductor material Bare Cu litz wires Material wire insulation foamed PE, with high density Single wire, color white, yellow, blue Thickness, insulation 0.89 mm (Outer cable sheath) Optical shield covering 78 % SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 4 (12)

Max. conductor resistance 31.2 Ω/km Wave impedance 110 Ω Working capacitance 61 pF Nominal voltage, cable 300 V Smallest bending radius, fixed installation 77 mm -30 °C ... 60 °C (cable, fixed installation)Ambient temperature (operation) -5 °C ... 60 °C (Cable, flexible installation) Environmental and real-life conditions Ambient conditions IP67 (When plugged in) IP65 (When plugged in) Degree of protection IP65/IP67 -25 °C ... 85 °C (Plug / socket)Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation) SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 5 (12)

Pin assignment M12 socket, 4-pos., A-coded, view female side SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 6 (12)

0 10 20 30 40 50 60 70 80 90 100 110 120 130 I [A] [°C] = 4x0,34mm 2 1 I = current strength, T = ambient temperature SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 7 (12)

ECLASS-11.0 27440103 ECLASS-12.0 27440103 ECLASS-13.0 27440103 ETIM ETIM 9.0 EC003570 SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 8 (12)

Environmental product compliance Environmentally friendly use period: unlimited = EFUP-eChina RoHS No hazardous substances above threshold values SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 9 (12)

SACC-M16-SEALING PLUG SETX - Screw plug 1239800 https://www.phoenixcontact.com/us/products/1239800 Screw plug, Rear mounting, M16 x 1.5, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb <0.1%) PROT-M12 - Screw plug 1680539 https://www.phoenixcontact.com/us/products/1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 10 (12)

https://www.phoenixcontact.com/us/products/1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors PROT-M12 FB - Screw plug 1555538 https://www.phoenixcontact.com/us/products/1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 11 (12)

SACC-M16-SEAL CLM - Flat gasket 1430394 https://www.phoenixcontact.com/us/products/1430394 M16 flat gasket for M12 flush-type connectors with M16 fastening thread Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACCBP-M12FS-4CON-M16/1,0-990X - Device connector, rear mounting 1240072 https://www.phoenixcontact.com/us/products/1240072 Jan 15, 2024, 7:45 AM Page 12 (12)